A Generalized Crystallographic Description of All Tellurium Nanostructures

Despite tellurium being less abundant in the Earth's crust than gold, platinum, or rare‐earth elements, the number of industrial applications of tellurium has rapidly increased in recent years. However, to date, many properties of tellurium and its associated compounds remain unknown. For example, formation mechanisms of many tellurium nanostructures synthesized so far have not yet been verified, and it is unclear why tellurium can readily transform to other compounds like silver telluride by simply mixing with solutions containing silver ions. This uncertainty appears to be due to previous misunderstandings about the tellurium structure. Here, a new approach to the tellurium structure via synthesized structures is proposed. It is found that the proposed approach applies not only to these structures but to all other tellurium nanostructures. Moreover, some unique tellurium nanostructures whose formation mechanism are, until now, unconfirmed can be explained.     

放射性物品运输容器防脆性断裂安全设计方法探讨

本文主要介绍了基于断裂力学的运输容器防脆性断裂安全设计,重点研究了防脆断条件中应力强度因子的计算方法。经分析,可以得出如下结论:RCC-M第Ⅰ卷附录ZG中的应力强度因子计算考虑了应力非线性分布和塑性区的影响,考虑因素比较全面,推荐采用。     

A Signed Array Multiplier with Bypassing Logic

A low power digital signed array multiplier based on a 2-dimensional (2-D) bypassing technique is proposed in this work. When the horizontally (row) or the vertically (column) operand is zero, the corresponding bypassing cells skip redundant signal transitions to avoid unnecessary calculation to reduce power dissipation. An 8×8 signed multiplier using the 2-D bypassing technique is implemented on silicon using a standard 0.18 μm CMOS process to verify power reduction performance. The power-delay product of the proposed 8×8 signed array multiplier is measured to be 31.74 pJ at 166 MHz, which is significantly reduced in comparison with prior works.     

LPM填充体混凝土空心楼盖施工技术

清华大学综合科研楼采用LPM填充体空心楼盖。介绍该楼盖的构造、施工流程和轻质管抗浮等技术措施。为保证楼盖质量,应重视组合模件的安装铺设和各专业工种的沟通配合。     

Experimental investigation on the piezo-composite actuator with piezoelectric single-crystal layer

Studies on muscle mimicking actuators have increased in the last two decades due to the possibility of various applications for compact lightweight actuators including small unmanned aircrafts, missile, and biomimetic robots. Piezoelectric materials have been used in a variety of applications ranging from shape control of structure and active vibration control of structure to noise suppression due to compact size and good frequency response. Conventional polycrystal piezoelectric ceramic materials, however, have limited actuating strains and displacement, hindering their use in actuators for small aerospace vehicles. In this study, the design and fabrication method of an actuator with a piezoelectric single-crystal layer were investigated to increase the actuation strain and displacement. From a comparison of the performance of the LIPCA-C2 and LIPCA-S prototypes, it was found that the new LIPCA-S2, which has much higher coefficient of the unimorph actuator, can generate an actuating displacement more than twice that of LIPCA-C2.     

Lipid‐lowering mechanism of egg yolk in normal rats

The ingestion of egg has been reported to lower blood cholesterol, but the mechanism is unclear. Here, the biochemical metabolic mechanism by which the oral administration of egg yolk affects blood lipid reduction was investigated using normal rats. Blood triglycerides and total cholesterol were lower and high‐density lipoprotein cholesterol was higher in an egg yolk‐given group compared to other groups, while low‐density lipoprotein cholesterol was increased in the pork belly oil‐given group. HMG‐CoA reductase activity was higher in the pork belly oil‐given group, compared to an egg yolk‐given group, a weekly alternating administration of pork belly oil and egg yolk‐given group, and the saline‐given normal control group. However, faecal excretions of total sterol, neutral sterol and acid sterol in an egg yolk‐given group were higher compared to the pork belly oil‐given group, a weekly alternating administration of pork belly oil and egg yolk‐given group, and a normal control group. The results suggested that ingestion of egg decreased blood lipids.     

Establishing an invar leveling calibration system

Abstract

Precise height systems are widely utilized in civil engineering projects such as high‐speed railroads, and highways and bridge construction. However, highly precise height data is obtained using precise leveling. An extremely precise invar leveling rod is necessary for obtaining precise results.

In this study, an automatic calibration system for invar leveling has been established by the National Measurement Laboratory (NML). The content belongs to the long scales calibration system of D17 of the NML. This system utilizes a steady frequency laser interferometer, a CCD microscopic monitor, and a precise moving mechanism. With this system, an invar rod and a mark invar leveling rod are applied to estimate uncertainty with a 95% confidence level. Uncertainty results are 22 μm and 21 μm for the invar leveling rods and mark invar leveling rods, respectively.     

Milling parameter optimization through a discrete variable transformation

Although milling is one of the most common chip metal removal processes, little has been done to aid in identifying the optimum operational conditions for milling processes. In this paper, a mathematical model for milling operations is developed and the five primary control variables identified. The model is then decomposed and an efficient optimization procedure developed for control variable identification.