A miniature UWB planar monopole antenna with 5-GHz band-rejection filter and the time-domain characteristics

A planar monopole antenna with a staircase shape and small volume (25/spl times/26/spl times/1 mm/sup 3/) is proposed in this paper. With the use of a half-bowtie radiating element, the staircase-shape, and a modified ground plane structure, the proposed antenna has a very wide impedance bandwidth measured at about 11.6 GHz (2.9-14.5 GHz, bandwidth ratio about 1:5) below VSWR 2 including the WLAN band notched in the vicinity of 5 GHz. An omnidirectional radiation pattern is obtained. The group delay which is an indication of linearity between two proposed antennas is less than 1 ns. The electrical characteristics in terms of frequency and time domains and physical ones of the proposed antenna make it attractive for use in ultrawideband (UWB) systems.     

Synthesis and Characterization of Nanocapsules of a-Fe(NiCoAl) Solid-solution

α-Fe(NiCoAl) solid-solution nanocapsules were prepared with pure powders of Fe, Ni, Co and Al by the plasma arc-discharging using a copper crucible. The shapes of the nanocapsules are in polyhedrons with the core/shell structure. The body centered cubic (BCC) phase is formed in the core. The size of the nanocapsules is in the range of 10~120 nm and the thickness of the shell is 4~11 nm. Saturation magnetization Js=150 Am2/kg and coercivity iHC=24.3 kA/m are achieved for the nanocapsules.     

Comments on “Quadratic stabilization of continuous timesystems with state-delay and norm-bounded time-varyinguncertainties”

In the above mentioned paper by Mahmoud-Muthairi (ibid. vol.39 (1994)) a sufficient condition for memoryless stabilization of a class of uncertain linear systems with a variable-state delay and norm-bounded time-varying uncertainties is derived in terms of an algebraic Riccati equation. This Riccati equation depends on several free matrix variables, and a subsequent result in the paper, Theorem 2, states that failure or success of the stabilization algorithm is independent of the selection of these matrix variables. In this paper, we give a counterexample to this Theorem 2 as well as providing a fix     

A novel integrated silicon capacitive microphone-floating electrode“electret” microphone (FEEM)

A novel principle “electret” microphone, i.e., floating electrode electret microphone, is proposed and implemented in this study. Single-chip fabrication and corrugation technique are used in the design and fabrication of the microphone. The floating electrode is encapsulated by highly insulated materials to ensure that there is no electric-leakage passage between the floating electrode and the electrodes of the microphone. Net-free electronic charges (not “bonded” charges as in traditional electret) in the floating electrode can excite the electric field, which is similar to that of the traditional electret. The floating electrode can be easily charged by use of the “hot” electron technique, available using the avalanche breakdown of the p⁺-n junction. Therefore, the electret microphone is rechargeable, which can greatly increase the lifetime of the device. The preamplifier has been on-chip integrated in a junction-field-effect transistor (JFET) source-follower type with resistors by use of ion implantation. Electret charges are banded in a deep potential trap, thus, this microphone can operate at a high temperature (as high as 300°C) and has high stability and reliability. Experiments show that the prototype has a 3-mV/Pa sensitivity and a larger than 21-kHz frequency bandwidth in a 1 mm ×1-mm diaphragm area. Microphone performance can be further improved by optimized process and design. The fabrication is completely integrated-circuit (IC) compatible, hence, the microphone shows promise in integrated acoustic systems     

Structural and electrochemical properties of vanadium oxide thin films grown by d.c. and r.f. reactive sputtering at room temperature

Vanadium oxide thin films were grown at room temperature by direct current and radio-frequency reactive sputtering systems to compare the structural and electrochemical properties. Rutherford backscattering spectrometry and Fourier transform infrared measurements reveal that the composition of the as-deposited films consists of the V₂O₅ phase regardless of the deposition methods. Wide-angle X-ray diffraction measurements show that the crystallinity of the as-deposited V₂O₅ films is different depending on the deposition method. Films deposited by direct current reactive sputtering were amorphous, whereas films deposited by radio-frequency reactive sputtering were crystalline. Scanning electron microscopy measurements show that the V₂O₅ films grown by radio-frequency reactive sputtering had a large grain size but the films grown by direct current reactive sputtering were amorphous. Charge–discharge measurements taken at room temperature with a constant current clearly indicate that the films grown by direct current sputtering demonstrated typical amorphous behavior, whereas the V₂O₅ films grown by radio-frequency sputtering demonstrated the discharge behavior of crystalline V₂O₅. The origin of the structural and electrochemical properties of film grown by radio-frequency reactive sputtering is a self-bias effect. The self-bias effect induces ion bombardment during the growth of vanadium oxide thin film. These results suggest that direct current reactive sputtering is more desirable for growing amorphous V₂O₅ thin film than radio-frequency reactive sputtering.     

Influence of calcination temperature on structural and optical properties of TiO2-SiO2 thin films prepared by sol-gel dip coating

We prepared TiO₂-SiO₂ thin films with various TiO₂/SiO₂ ratios by sol-gel dip coating method and explored the dependence of their structural and optical properties on calcination temperature. The absorption peaks relevant to Si—O, Si—O—Ti and Ti—O bonds appeared in the FTIR spectra. With increasing TiO₂ content, the intensity of Si—O bond peaks decreases and that of Ti—O bond peaks increases. The XRD results show that the temperature of transformation from amorphous to anatase phase is lowered as TiO₂ content increases. The crystallite size of anatase phase in composite thin films increases with increasing TiO₂ content and calcination temperature. At 1000°C, the mixed phase of anatase and rutile appears in the pure TiO₂ thin films. The rutile films are denser than the anatase films. The increase in refractive index of composite thin films with calcination temperature is related to the decreased thickness and increased density as a result of evaporation of water and organic matters below 400°C. On the other hand, it is related to the change in the crystal phase and crystallite size of the films over 400°C.     

Physical and Sexual Intimate Partner Violence Among Women in Methadone Maintenance Treatment.

Although several studies have examined the relationship between intimate partner violence (IPV) and drug use among women in drug treatment programs, more information is needed to delineate differences, as a function of the specific drug used. Data from a random sample of 416 women attending methadone programs were analyzed to elucidate the differential associations between IPV and use of the following: marijuana only, cocaine only, heroin only, or cocaine and heroin. Prevalence of IPV among this sample far exceeded estimates from the general population. After adjusting for sociodemographic variables, use of cocaine only was significantly associated with an increased likelihood of experiencing IPV compared with no drug use. Similar results were found for women using both cocaine and heroin. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Influences of the dynamic strain aging on the J–R fracture characteristics of the ferritic steels for reactor coolant piping system

The leak-before-break (LBB) design of the piping system for nuclear power plants has been based on the premise that the leakage due to the through-wall crack can be detected by using leak detection systems before a catastrophic break. The piping materials are required to have excellent J–R fracture characteristics. However, where ferritic steels for reactor coolant piping systems operate at the temperatures where dynamic strain aging (DSA) could occur, the fracture resistance could be reduced with the influence of DSA under dynamic loading. Therefore, in order to apply the LBB design concept to the piping system under seismic loading, both static and dynamic J–R characteristics must be evaluated.Materials used in this study are SA516 Gr.70 for the elbow pipe and SA508 Cl.1a for the main pipe and their welding joints. The crack extension during the dynamic and the static J–R tests was measured by the direct current potential drop (DCPD) and the compliance method, respectively. This paper describes the influences of the dynamic strain aging on the J–R fracture characteristics with the loading rate of the pipe materials and their welding joints.     

Biomimetic micropatterning of silica by surface-initiated polymerization and microcontact printing

Micropatterns of silica on a gold substrate were generated by a biomimetic approach, namely, the biosilicification of silicic acids. The procedure consists of three simple steps: pattern generation of a polymerization initiator, (BrC(CH(3))(2)COO(CH(2))(11)S)(2), by microcontact printing; surface-initiated, atom-transfer radical polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA) from the patterned area; and polycondensation of silicic acids. The tertiary amine-containing polymer, pDMAEMA, aided in the spatially controlled polycondensation of silicic acids on surfaces in the presence of phosphate ions, and micropatterns of silica on a gold substrate were successfully generated in combination with the technique of microcontact printing. The procedure could be extended to the controlled fabrication of silica patterns with any size, shape, or thickness.     

Selective Coloration of Melanin Nanospheres through Resonant Mie Scattering

Black melanin inks are prepared to selectively exhibit colors under strong light, inspired by human hair. High absorbance of melanin suppresses multiple scattering, causing resonant Mie scattering predominant. Various colors can be developed as the resonant wavelength dictated by nanosphere diameter. Therefore, the melanin inks can be used to encrypt and selectively disclose multicolor patterns for anticounterfeiting applications.