Temperature-dependent kinetics of grape seed phenolic compounds extraction: Experiment and model

The kinetics of a batch solid–liquid extraction of total phenolic compounds (PC) from milled grape seed (Vitis vinifera L. cv. “Frankovka”) using 50% ethanol at different extraction temperatures (25–80 °C) was studied. The maximum yield of PC was 0.13 kg_GAE/kg_db after 200 min of extraction in agitated vessel at 80 °C. A new model based on the assumptions of a first order kinetics mechanism for the solid–liquid extraction and a linear equilibrium at the solid–liquid interface was developed. The model involves the concept of broken and intact cells in order to describe two successive extraction periods: a very fast surface washing process followed by slow diffusion of phenolic compounds from grape seeds to the solvent.The proposed model is suited to fit experimental data and to simulate the extraction of phenolic compounds, which was confirmed by the correlation coefficient (r ? 0.965), the root mean square error (RMSE ? 0.003 kg_GAE/kg_db) and the mean relative deviation modulus (E ? 2.149%). The temperature influenced both equilibrium partition coefficients of phenolic compounds and transport properties, which is manifested by a relatively high value of activation energy (23–24) kJ/mol and by values of effective diffusivity in seed particles.     

Aerodynamic design and analysis of a small-scale vertical axis wind turbine

Small-scale vertical axis wind turbines are regarded today as an attractive source of green energy, still insufficiently implemented and tested. This paper presents a fast design methodology of such a VAWT, in terms of choosing its main parameters: airfoil, rotor diameter and solidity. For obtaining generated power of each considered geometrical model at different undisturbed wind velocities and rotor angular velocities two models were used — momentum and vortex-wake model, combined with experimentally measured airfoil data (airfoil lift and drag coefficients). Even though the former model is simpler, it is the most utilized model, known to provide good results in stationary working regimes. Both models still present fairly accurate and fast tools for computation and optimization, particularly useful in the phase of conceptual design. In this research, the use of the momentum model resulted in determination of the maximal power coefficient, optimal- and minimal freestream velocity for every considered VAWT model. From these output parameters, a selection of the optimal geometric model was done, and a more detailed transient analysis and flow representation around the selected solution was obtained by the vortex-wake model. The results obtained by the two used computational models coincide satisfactorily.     

Mathematical modelling of soybean oil solubility in supercritical carbon dioxide

The solubility of soybean oil in supercritical carbon dioxide has been determined in the pressure range of 100–300 bar and in the temperature range of 313–323 K. The obtained values (from 0.0005 to 0.02055 g L^?1) have been correlated using four different empirical equations proposed correspondingly by Chrastil, del Valle and Aquilera, Adachi and Lu and Sparks et al. Since the Sparks et al. equation provided the lowest average absolute relative deviation (AARD) (10.25%) than other models in the examined experimental range, a modified equation of Sparks et al. model was developed for predicting the solubility of soybean oil in supercritical carbon dioxide as a function of temperature and density. An improved equation showed the lowest deviation (2.15%) between experimental data than the other empirical equations considered in this study. The proposed equation was also applied for correlating the solubility of linoleic acid (AARD was 2.40%).     

STRATIGRAPHY AND PETROLEUM GEOLOGY OF THE CROATIAN PART OF THE ADRIATIC BASIN

Coastal parts of Croatia are dominated by the SW‐verging Dinaric foldbelt, to the west and SW of which is the Adriatic Basin (the stable foreland). In both areas, the stratigraphic column is dominated by a thick carbonate succession ranging from Carboniferous to Miocene. Four megasequences have been identified: (i) a pre‐platform succession ranging in age from Late Carboniferous (Middle Pennsylvanian: Moscovian) to Early Jurassic (Early Toarcian; Bru?ane and Ba?ke Ostarije Formations); (ii) an Early Jurassic to Late Cretaceous platform megasequence (Mali Alan Formation); (iii) a Paleogene to Neogene post‐platform megasequence (Ra?a Formation); and (iv) a Neogene to Quaternary (Pliocene to Holocene) megasequence (Istra and Ivana Formations). A number of organic‐rich intervals with source rock potential have been identified on‐ and offshore Croatia: Middle and Upper Carboniferous, Upper Permian, Lower and Middle Triassic, Lower and Upper Jurassic, Lower and Upper Cretaceous, Eocene, and Pliocene – Pleistocene. Traps and potential plays have been identified from seismic data in the Dinaric belt and adjacent foreland. Evaporites of Permian, Triassic and Neogene (Messinian) ages form potential regional seals, and carbonates with secondary porosity form potential reservoirs. Oil and gas shows in wells in the Croatian part of the Adriatic Basin have been recorded but no oil accumulations of commercial value have yet been discovered. In the northern Adriatic offshore Croatia, Pliocene hemi‐pelagic marlstones and shales include source rocks which produce commercial volumes of biogenic gas. The gas is reservoired in unconsolidated sands of the Pleistocene Ivana Formation.     

Periodical Literature in Urban Studies and Planning

Geographic information systems have the potential to aid planning functions in both data processing and decision making. Because the incorporation of GIS technology into local government is at an early stage, knowledge about GIS implementation and its impact on planning activities is scarce. Using a survey of local governments in four southeastern states, this paper explores how the new technology affects planning and whether it meets the expectations of the planning agencies using it. Most of the agencies surveyed report improvements in communication of information, data accessibility, and data accuracy. They report that more current data are available, and they have confidence in analyses performed with GIS technology. Political support, staffing, length of experience with GIS technology, system sharing, data-base contents, and number and type of GIS applications all exert some influence on either planning operations or decision making. While experience with GIS emerged as the most significant factor in achieving operational benefits, using GIS technology for analytical tasks positively affected improvements in decision making.     

Optimization of supercritical CO2 extraction of dried Helichrysum italicum flowers by response surface methodology: GC-MS profiles of the extracts and essential oil

Supercritical (SC) CO₂ extraction of dried Immortelle flowers was performed at different process parameters. The optimal extraction conditions related to the yield were determined by response surface methodology (yield 4.09% at 20 MPa and 52°C). The extracts were analyzed by GC-MS and tremetone derivatives dominated: bitalin A, 12-acetoxytremetone, gnaphaliol, 1-[2-(2-methyl-2,3-dihydroxypropyl)-2,3-dihydro-1-benzofuran-5-yl]ethanone, isobutyl bitalin A, and 1-[2-(acetylprop-1-en-2-yl)-3-hydroxy-2,3-dihydro-1-benzofuran-5-yl]ethanone. Striking differences were found among the essential oil and SC-CO₂ extracts composition. The major oil compounds were γ-curcumene, α-pinene, β-selinene, α-selinene, and limonene. Mono- and sesquiterpene were found among minor constituents of the extracts. Neryl acetate was present in the extracts and essential oil.     

Polyethylene/Polycaprolactone Nanocomposite Films for Food Packaging Modified with Magnetite and Casein: Oxygen Barrier,Mechanical, and Thermal Properties

Polyethylene (PE) was modified and prepared as double-layer polyethylene/polycaprolactone (PE/PCL) film. Magnetite and casein were added to the PCL-coating film to improve barrier properties and prevent destruction of basic structure of primary polymer PE. Significant improvements were observed with regards to mechanical (tensile strength, elongation at break) and thermal properties, while barrier (O₂ permeability) properties were slightly improved. Overall migration values into acetic acid were lower (from 1 to 4.6 mg/dm²) than the upper limit set by the legislation. Specific migration of iron in PE/PCL-Fe samples is also below (µg/L) specific migration limit value set by the legislation (mg/kg).     

Acid catalyst influence on the polymerization time of polyfurfuryl alcohol and on the porosity of monolithic vitreous carbon

This study compares the influence of different acid catalysts on the polymerization rate of polyfurfuryl alcohol (PFA) precursor and especially on the respective porosity of Monolithic Vitreous Carbon (MVC) produced from that. Five acid catalysts commonly used were compared: p‐toluenesulfonic (PTLS), hydrochloric, sulfuric, nitric, and phosphoric. A fixed molar concentration of catalyst was diluted in PFA resin under room pressure and temperature. The time dependence of PFA resin polymerization was investigated by optical transmittance of PFA films, and the polymerization degree, characterized by ATR spectroscopy and thermogravimetry. MVC samples prepared with the same PFA resin and each catalyst were carbonized up to 1200 °C, under inert atmosphere. MVC porosity was studied by nitrogen adsorption/desorption, and by SEM and optical microscopy. Higher polymerization degree and higher residual mass were obtained with faster catalysts. No direct relation between the polymerization rate and the acid force was observed. PTLS promoted the fastest PFA polymerization process and the sulfuric acid, the slowest one. MVC samples were obtained by slow carbonization. MVC presented low specific surface S_BET from 1.4 to 7.4 m²/g. Nitric acid catalyst contributed the most to micropores formation. Micrometric apparent porosity was smaller for the catalysts having longer polymerizations times, such as phosphoric and sulfuric acid. Phosphoric catalyst corresponded to the lowest porosity in MVC. As the polymerization time increased, the average size of the micrometric surface pores tended to augment. The MVC macroscopic porosity increased with the S_BET increment. Acid catalysts choice exerted a fundamental role on the porosity of MVC. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43272.     

Borcalein: a Carborane-Based Analogue of Baicalein with 12-Lipoxygenase-Independent Toxicity

12-Lipoxygenase is crucial for tumour angiogenesis. 5,6,7-Trihydroxy-2-phenyl-4H-1-benzopyran-4-one (baicalein) is a suitable inhibitor for this enzyme but is rapidly metabolised in vivo. Thus, an improvement of the metabolic stability is necessary to enhance the therapeutic efficiency. An emerging approach to enhance metabolic stability of carbon-based pharmaceuticals is the use of metabolically stable, non-toxic boron clusters, such as dicarba-closo-dodecaborane(12)s (carboranes) as phenyl mimetics. Therefore, the unsubstituted phenyl ring of baicalein was replaced by meta-carborane, resulting in borcalein, the carborane analogue of baicalein. This substitution resulted in a decreased inhibitory activity toward 12-lipoxygenase, but led to increased toxicity in melanoma (A375, B16, B16F10) and colon cancer cell lines (SW480, HCT116, CT26CL25) with decreased tumour selectivity in comparison to baicalein. Surprisingly, borcalein displays a different mechanism of cytotoxicity with increased intracellular production of reactive oxygen species (ROS), reactive nitrogen species (RNS) and nitric oxide (NO).