The use of roughness to produce high reynolds number flows around circular cylinders at lower reynolds numbers

It has long been stated that the pressure distribution around a circular cylinder at high values of Reynolds number can be reproduced at lower values of Reynolds number by a suitable roughening of the surface of the cylinder. This paper shows that this is indeed possible and explains the problems.     

Finite element modelling of plate girders with web openings

This paper is concerned with a finite element model to predict the behaviour and ultimate load of plate girders with web openings. The finite element package is used to model the plate girders with web openings. Accuracy of the model is assessed by applying it to plate girders tested earlier by other researchers. Comparison of analytical results with the available experimental results for yielding patterns, ultimate load values and load–deflection relationships show good agreement between the finite element and experimental results thus validating the accuracy of the proposed model. The proposed finite element method was extended to carry out a parametric study. The study covered parameters such as web slenderness and flange stiffness.     

Permeability changes in granite with crack growth during immersion in hot water

Permeability tests and observation of induced, as well as inherent, cracks have been carried out to quantitatively explain permeability changes in granite taking place during a weathering test in terms of micro-structure by cracks. To this end, permeability tensors were estimated from observations of crack systems using the Replica Method and of the crack apertures with a scanning electron microscope. The following conclusions were reached: the drastic increase in permeability around an immersion of 1000 d in 90°C water could not be explained by the existence of a percolation threshold because all the specimens were percolative in the sense that the traces of crack tensor were above the critical density for percolation. On the other hand, SEM observation revealed that, with immersion, crack apertures widened and their distribution spread. Permeability estimated using the third (not the first) moment of observed apertures showed the increase in measured permeability well. When evaluating the connectivity parameter λ to give a quantitative accordance between measured and estimated permeability, it had a constant value as low as 0.17, irrespective of the immersion period, in spite of the higher density of micro-cracks than the percolation threshold. It can be said that, in considering the natural three-dimensional crack system, the third moment of physical apertures plays a more important role in predicting the permeability and λ is greatly affected by the spread of crack apertures.     

Radiocesium in muscle tissue of reindeer and pike from northern Sweden before and after the Chernobyl accident. A retrospective study on tissue samples from the Swedish Environmental Specimen Bank.

After the Chernobyl accident in April 1986, considerable deposition of radionuclides occurred regionally in eastern, central and northwestern Sweden. Locally, the fallout of radiocesium exceeded the remainder from atmospheric nuclear weapons tests by several magnitudes. Since the end of the 1960s samples of organs from various plant and animal species, annually collected at different localities, have been preserved in the Swedish Environmental Specimen Bank (ESB). In this work samples from the ESB have been used for retrospective studies of radioactive pollution. The activities of Cs-134 and Cs-137 in muscle tissues from reindeer, Rangifer tarandus, and pike, Esox lucius, preserved in the ESB, were measured. The samples were collected annually; the reindeer at three localities in northern Sweden and the pike at one of them. In material collected prior to the Chernobyl accident, the levels of Cs-137 were 57-180 Bq/kg in reindeer and 14-24 Bq/kg in pike, fresh weight basis. These levels relate to earlier nuclear bomb tests. A significant decrease was found in pike during the pre-Chernobyl period (1971-86). In post-Chernobyl samples the burden of Cs-137 varied from amounts equal to the former levels in the northernmost locality and up to 80 times higher for the maximum values in the southernmost locality. The highest value recorded was 18,425 Bq/kg in reindeer. The geographic variations in reindeer from Chernobyl fallout were in accordance with the pattern of deposition estimated by aircraft surveys performed in May 1986. The ratio between 'new' and 'old' radiocesium burdens in pike, caught in 1987, approached the corresponding ratio for reindeer grazing in the precipitation area of the lake; 33 and 19, respectively.     

Contribution à l'étude de la détermination des conditions de formation des haloformes

In recent years the presence of haloforms has been observed by some researchers in waters of various origins.The aim of this study is to determine the conditions in which chloroform is formed by chlorination of aqueous solutions of some organic compounds.The first part of this work was carried out by chlorination of synthetic basic solutions of acetone and thus enabled us to determine the reagent concentrations needed to obtain the maximum quantity of chloroform.We studied next the effect of chlorination on organic material solutions (humic acids and phenols), in the course of an oxidation treatment; the results obtained by chlorination of aqueous solutions of humic substances show that the quantity of chloroform produced passes through a maximum value which depends on the time of ozonisation. Similar results were obtained for the chlorination of phenol solutions during oxidation by the u.v. + H₂O₂ system. These results may be explained by the partial degradation of the molecules which leads in the formation of reactional intermediate precursors of the haloform reaction. We undertook at the same time the study of a rapid test allowing us to detect the presence of haloform reaction precursors in a certain sample of water.     

Dynamic analysis and optimal feedback control synthesis applied to biological waste treatment

The dynamics and optimal feedback control of biological waste treatment processes are examined. Modern feedback control theory is applied and results are obtained for both proportional and proportional plus integral control. A dynamic mathematical model of the system is developed by employing a Monod kinetic model, which is modified to account for endogenous metabolism, and a complete mixing flow model in the growth chamber. The feedback control is implemented via the flow rate so as to maintain desired effluent concentrations. External disturbances which cause changes in substrate concentration and/or cell concentration are considered and optimal control effort is applied. Results are also presented for impulse and step changes in the influent substrate concentration. It is found that by changing the values of the weighting factors in the objective function, it is possible to obtain good control of either the effluent substrate concentration or cell concentration.     

A large-scalein situ permeability test at Presenzano (Italy)

Bulletin of Engineering Geology and the Environment - Soil permeability had to be carefully determined in order to decide whether or not the whole lower reservior (750.000 m2) of the Presenzano...     

Levels of copper in the urine of women from nonpolluted farming regions of Japan.

Nearly 1500 spot urine samples were collected in the winter of 1987-1988 from women of seven farming prefectures located throughout Japan. Samples were analyzed for copper by flameless atomic absorption spectrometry. The copper content of the urine samples (Cu-U) distributed log-normally with a geometric mean (geometric standard deviation) of 36.9 (1.47) micrograms/l after adjustment for the specific gravity of urine of 1.016. The 95% confidence range was 17.1-79.7 micrograms/l. Neither alcohol consumption nor smoking habit affected the Cu-U. A literature survey showed that the observed level appears to be somewhat higher than previously reported values.     

Fire Safety Engineering Research and Technology Centre (FireSERT) University of Ulster: Recent Developments

The Institute of Fire Safety Engineering Research and Technology Centre (FireSERT) at the University of Ulster in Northern Ireland has been a major provider of higher technical fire safety education, fire related research and services to industry for over 20 years. Its internationally recognised research spans the fields of fire dynamics, structural fire engineering, human behaviour in fire and more recently fire (CFD) modelling. Since 1991, it has offered the only PG Dip/MSc Fire Safety Engineering programme in the United Kingdom. In September 2000 FireSERT was the recipient of a £5.7 m Joint Infrastructure Fund (JIF) Award to build new fire safety engineering laboratories on the University's Jordanstown campus. These new facilities unparallel in the University sector in the UK offer greater scope and depth to the FireSERT's research portfolios. The new facilities will be extensively used in support of FireSERT's suite of MSc Fire Safety Engineering and DPhil programmes. This paper presents a brief history of FireSERT and its achievements, together with an update on the new facility, current research themes, taught programmes, research opportunities and visions for the future.