Effect of applied voltage frequency on swarming pulsive microdischarges in closed voids

The extinction of the partial discharge (PD) pulse has frequently been observed in an epoxy specimen with a closed void during voltage endurance tests using a CIGRE Method-II electrode. The individual discharge pulse becomes so small that the discharges cannot be detected by conventional pulse detection methods. Such discharges are known as “swarming pulsive microdischarges” (SPMD). In this paper, the SPMD characteristics are investigated by varying the frequency of the applied voltage from 0.1 to 240 Hz. As a result, the SPMD are found to occur less frequently as the frequency is lowered. To seek this cause, one-shot voltages were applied repeatedly at constant intervals. By varying the interval from 0.02 to 100 s, the PD off an electrically aged specimen was measured. It was revealed that the discharge magnitude increases as the interval becomes longer. The onset of SPMD was found to depend on the preceding discharge. The results explain the reason why swarming is harder to occur at lower frequency with a longer discharge interval. Hence, in the conventional pulse detection, it is useful to employ the very low frequency for diagnosis of machine insulation containing enclosed voids.     

The Oxidation behavior of an iron-chromium alloy containing yttrium or rare earth elements between 900° and 1200°C

The oxidation behavior of an Iron-15 wt pct Chromium alloy, some containing small additions of yttrium or rare earth elements, have been observed using a TG and an EPMA method at temperatures between 900° and 1200°C. Yttrium or rare earth element additions to the Iron-Chromium alloy result in a rapid initial oxidation rate, but decrease the total weight gain of the Iron-Chromium alloy at the final time of exposure. The line trace obtained indicates that the increased segregation of chromium content in the inner oxide layer of the alloy containing yttrium or rare earth elements and also shows that the enriched concentration of yttrium or lanthanum is detected within the chromium oxides which exist near the oxide scale/alloy matrix interface. Yttrium or rare earth element oxides serve as the sites for the protective chromium oxide scales.     

Study on anisotropy of growth rate of ice crystal in supercooled water

The purpose of this research was to investigate the ice growth of a single crystal in three dimensions. Three-dimensional pattern of ice crystal growth in supercooled water was observed using Mach–Zehnder spectro-interferometer. Temperature was varied from −0.3 to −1.6 °C. It was found that the ice crystal began to grow as a single crystal at the tip of the capillary tube and propagated freely in supercooled water. Time variation of the shape of dendrite on a–c plane was obtained. It was found that half parabola fits the shape very closely, and the coefficient of squared term, a, of a quadratic function was calculated. The coefficient, a varied in time but at quasi steady state it was found to be depending mostly upon the degree of supercooling. Furthermore, the growth velocity in c-axis at the flat surface was calculated from the thickness measured. It was found that the velocity in c-axis is independent of the degree of supercooling but depends upon time, in other words, the thickness in c-axis.     

Occurrence,horizontal transfer and degeneration of VDE intein family in Saccharomycete yeasts

VDE is a homing endonuclease gene originally discovered as an intervening element in VMA1s of Saccharomyces cerevisiae. There have been two independent subfamilies of VDE, one from S. cerevisiae strain X2180-1A and the other from Saccharomyces sp. DH1-1A in the host VMA1 gene, and they share the identity of 96.3%. In order to search the occurrence, intra/interspecies transfer and molecular degeneration of VDE, complete sequences of VMA1 in 10 strains of S. cerevisiae, eight species of saccharomycete yeasts, Candida glabrata and Kluyveromyces lactis were determined. We found that six of 10 S. cerevisiae strains contain VDEs 99.7-100% identical to that of the strain X2180-1A, one has no VDE, whereas the other three harbour VDEs 100% identical to that of the strain DH1-1A. S. carlsbergensis has two VMA1s, one being 99.8% identical to that of the strain X2180-1A with VDE 100% identical to that of the strain DH1-1A and the other containing the same VMA1 in S. pastorianus with no VDE. This and other evidence indicates that intra/interspecies transmissions of VDEs have occurred among saccharomycete yeasts. Phylogenetic analyses of VMA1 and VDE suggest that the S. cerevisiae VDEs had branched earlier than other VDEs from an ancestral VDE and had invaded into the host loci as relatively late events. The two VDEs seemed to degenerate in individual host loci, retaining their splicing capacity intact. The degeneration of the endonuclease domains was distinct and, if compared, its apparent rate was much faster than that of the protein-splicing domains.     

In-plane detection of scattered light from a minute particle using a resin-based light waveguide incorporated with a microfluidic channel

An optical sensor combined total analysis system (TAS) is thought to be one of the most powerful functional elements needed to realize a “ubiquitous human healthcare” system. In accordance with this concept, we have proposed a fundamental structure of detecting side scattered light from a minute cell or particle running along a microfluidic channel, partially utilizing the channel filled with water or saline solution as a light waveguide. Based on this concept, we have fabricated a trial-manufactured optical TAS chip and carefully evaluated its side scattered light measuring performance in in-plane direction, supplying and detecting visible laser power by using multiple optical fibers and their precise positioning mechanisms. We have successfully obtained experimental results of both transmitted light power change and that of side scattered light, and we confirmed that there was a strong relationship between their signal waveforms. Furthermore, we have developed a hybrid numerical calculation method on the basis of the finite-difference time-domain method, in addition to the beam propagation method. Based on this hybrid method, we tried to compare results between the experimental inverse pulse of transmitted light and a pulse of side scattered light, and those based on numerical calculations. Excellent qualitative accordance was obtained between the inverse pulse of numerical and experimental results. In contrast, the experimental pulse of side scattered light indicated a considerably spread base in comparison to the numerical results.     

In Situ Formation of Hexaferrite Magnets within a 3Y-TZP Matrix: La2O3–ZnO–Fe2O3 and BaO–Fe2O3 Systems

The in situ formation of magnetoplumbite-type (M-type) hexaferrites within a 3Y-TZP matrix was examined for the La₂O₃–ZnO–Fe₂O₃ and BaO–Fe₂O₃ systems. The formation of barium hexaferrite (Ba-M) was rapid enough at a temperature of 1300°C for 2 h to result in a uniform dispersion of fine Ba-M particles in a tetragonal zirconia polycrystal (TZP) matrix. However, the formation of lanthanum-substituted hexaferrite (La-M) was rather sluggish, despite the existence of a charge-compensating divalent oxide. The 3Y-TZP/20-wt%-BaFe₁₂O₁₉ in situ composite possessed good magnetic properties, as well as moderately good mechanical properties.     

Mixed powder coating film using thermoplastic polyester and its alkaline resistance

To improve alkaline resistance, a newly mixed powder coating film using thermoplastic polyethylene terephthalate (PET) was investigated. Two kinds of polyvinyl butyral (PVB) and two kinds of polyamide (PA) were chosen as the secondary polymer. The melting temperatures (T _ms) of these materials were lower than that of primary PET polymer so the mixed powder coating was able to form a dual phase film through a fluidized bed coating process. Microscope and Fourier transform infrared spectroscopy (FTIR) observations revealed that the dual phase structure was indeed successfully formed and there was a secondary layer over the entire surface area of the film. This mixed powder coating film significantly enhanced the alkaline resistance to an environment filled with NaOH solution at 40°C in which a secondary material would be effective in protecting the film. With regard to both alkaline resistance and film formability, PET/PVB was superior to the PET/PA mixture.     

Chained aggregation model with minimum truncation error

A reduced–order model for a multi–input single–output or a single–input multi–output continuous system is proposed. The model is especially suitable for the case where accuracy in the high-frequency region is important. It also satisfies basic conditions for reduced-order models, such as uniqueness, stability, and a simple calculation requirement. Chained aggregation with the minimization of truncation errors introduces an internal system representation characterized by a system matrix of Hessenberg form and a diagonalized covariance matrix.     

ALIS method for high‐resolution color PDPs

This paper describes the Alternate Lighting of Surfaces (ALIS) method as a promising drive technology which can lead to high‐resolution plasma‐display panels (PDPs). This technology provides a resolution of more than 1000 scanning lines without lowering luminance, thus enabling the essential requirements of HDTV. Moreover, it allows the number of scanning electrodes to be halved in comparison with the conventional method, as well as the circuit scale to be minimized due to the use of the single scanning drive. The ALIS method is expected to be a key technology that will help PDPs penetrate the TV market.     

日本水坝的安全管理和地震安全评价

日本是一个地震多发的国家,而特殊的地形又决定了水坝在其经济社会发展中具有重要的地位,因此水坝的安全管理和地震安全评价就成为一个至关重要的方面.