Study on explosion characteristics of natural gas and methane in semi-open space for the HTTR hydrogen production system

It is important to grasp the explosion characteristics of object gases: natural gas and methane, in order to evaluate the influence of a gas explosion accident in the HTTR hydrogen production system on the reactor. Thus, we carried out explosion experiments of the object gases in semi-open space, and verified a numerical analysis code for the simulation of the explosion accident. It was confirmed that NG–air mixture or methane-air mixture in semi-open space did not result in DDT although 10 g of C-4 explosive was used as an ignition source, and the numerical results agreed relatively with the experimental results. As a result, we could have the prospects for predicting the influence of the explosion accident on the reactor.     

Application of parallel genetic algorithms to generation expansion planning using parallel processors

This paper presents an application of parallel genetic algorithms (PGA) to the optimal long-range generation expansion planning. The problem can be formulated as a combinatorial optimization problem that determines the order of introduced generation units at each interval of the year. The proposed method considers introduced power limits of each technology, maximum loads at each interval, and load duration curves at each interval. Appropriate string representation for the problem is presented. Binary and decimal coding and three selection methods are compared. The method is developed on a transputer that is one of the parallel processors. The feasibility of the proposed method is demonstrated using a typical expansion problem with four technologies and five intervals. The method is then compared with conventional dynamic programming and a simple genetic algorithm with promising results.     

A Form Evaluation System and Its Data Structure for Brush-Written Chinese Characters

1IntroductionCharacterswerecreatedasamediumofcommunication.Forexample,theyhavebeenusedtorecordsocialactivitiesandhumanthinking,andtohelppeoplesexchangeinformation.Differencesfrommanyothercharacters,however,theChi-nesecharacterisatypicalideograph.BecauseChinesecharactersoriginatedfromdrawings,theirshapeshavetheelementsofbeauty.InChina,calligraphyaboutChinesecharactershasbeenanimportanpartofartsinceancienttimes.There-sultsofstudiesaboutcalligraphyhavebeenbequeathedascalligraphicworksandcallig…     

CO2 decomposition with oxygen-deficient Mn(II) ferrite

An oxygen-deficient Mn(II) ferrite (Mn_0.97Fe_2.02O_3.92) was synthesized and its reactivity to reduce CO₂ gas into carbon was studied at 300°C. The oxygen-deficient Mn(II) ferrite was obtained by flowing H₂ gas through Mn(II) ferrite with a nearly stoichiometric composition of Mn_0.97Fe_2.02O_4.00 at 300° C. The lattice constant of the oxygen-deficient Mn(II) ferrite (0.8505nm) is larger than that of the Mn(II) ferrite with a nearly stoichiometric composition (0.8498nm). The chemical composition of the Mn(II) ferrite changed from Mn_0.97Fe_2.02O_4.00 to Mn_0.97Fe_2.02O_3.92 during the H₂ reduction process, indicating that the oxygen is deficient in the spinel structure of the Mn(II) ferrite. This was confirmed by Mössbauer spectroscopy and X-ray diffractometry. The efficiency of CO₂ decomposition into carbon at 300°C with the oxygen-deficient Mn(II) ferrite was much lower by about 10⁵ than that of oxygen-deficient magnetite. This is considered to be due to the difference in electron conductivity between Mn(II) ferrite and magnetite, which determines the reductivity for CO₂ into carbon by donation of an electron at the adsorption site.     

Dye-sensitized solar cell made of mesoporous titania by surfactant-assisted templating method

Nanocrystalline mesoporous titania was obtained by surfactant-assisted templating method using tetraisopropyl orthotitanate modified with acethylacetone and laurylamine hydrochloride as template. This material was applied for the electrode of dye-sensitized solar cell. The mesoporous TiO₂ (MP-TiO₂) cells exhibited higher short-circuit photocurrent density and solar energy conversion efficiency compared to P25 (a typical commercial titania powder) cells. The incident photon to current conversion efficiency spectrum of MP-TiO₂ can be improved by using the cell made with 5% P25 additive. Double-layer titania cells were fabricated to further improve cell performance by increasing the film thickness and light scattering. The solar conversion efficiency up to 8.06% was obtained by using the double-layer titania cell sintered at 450 °C for 2 h.     

Measurement of Rising R-Curve Behavior in Toughened Silicon Nitride by Stable Crack Propagation in Bending

A simple procedure for measuring the R -curve properties of ceramics by a stable fracture test in three-point bending is described. As a typical case, data are displayed for a Si₃N₄ material toughened by the presence of acicular grains in situ grown during the sintering process. The fracture mechanics specimen was a single-edge double-notched beam (SEDNB), whose notch was sharpened to a radius of <10 μm in order to reduce the amount of elastic energy stored at its root prior to crack extension. Furthermore, a stabilizer, specially designed for the bending geometry, was used to control crack stability. During stable extension, the crack could be easily arrested at selected locations of the load-displacement curve, the load quickly released, and the stable crack extension directly measured by the die-penetration technique. The crack resistance, K _R, of the material was calculated from the measured crack extent and the onset load value before unloading. This method enabled us to precisely monitor the critical load value at which the load-displacement curve deviated from linear behavior, as well as crack extensions from a few tens of micrometers to about 1 mm. As an application of this method, the fracture resistance of a Si₃N₄ material with rising R -curve behavior was measured and found to increase from about 5.5 to 9.0 MPaμm^1/2 within a 0.8-mm extension.     

Electron-microscopic imaging of single-walled carbon nanotubes grown on silicon and silicon oxide substrates

Direct imaging of single-walled carbon nanotubes (SWNTs) suspended on pillar-patterned Si or SiO2 substrates is investigated using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The suspended nanotubes are successfully observed by direct TEM imaging and it is seen that they have either individual or bundles of SWNTs. Low energy (< or =2 keV) SEM produces high contrast images of suspended SWNTs. On the contrary, when SWNTs contact a SiO2 substrate, they are imaged using electron-beam induced current. The image brightness depends on the length of SWNTs.     

Dibenzothiophene desulfurizing enzymes from moderately thermophilic bacterium Bacillus subtilis WU-S2B: purification, characterization and overexpression

The moderately thermophilic bacterium Bacillus subtilis WU-S2B desulfurized dibenzothiophene (DBT) at 50 degrees C through the selective cleavage of carbon-sulfur bonds. In this study, three enzymes involved in the microbial DBT desulfurization were purified and characterized. The first two enzymes, DBT monooxygenase (BdsC) and DBT sulfone monooxygenase (BdsA), were purified from the wild-type strain, and the last one, 2'-hydroxybiphenyl 2-sulfinic acid desulfinase (BdsB), was purified from the recombinant Escherichia coli overexpressing the gene, bdsB, with chaperonin genes, groEL/ES. The genes of BdsC and BdsA were also overexpressed. The molecular weights of BdsC and BdsA were determined to be 200 and 174 kDa, respectively, by gel filtration chromatography, suggesting that both enzymes had four identical subunits. BdsB had a monomeric structure of 40 kDa. The three enzymes were characterized and compared with the corresponding enzymes (DszC, DszA, and DszB) of mesophilic desulfurization bacteria. The specific activities of BdsC, BdsA, and BdsB were 84.2, 855, and 280 units/mg, respectively, and the latter two activities were higher than those of DszA and DszB. The heat stability and optimum temperature of BdsC, BdsA, and BdsB were higher than those of DszC, DszA, and DszB. Other enzymatic properties were investigated in detail.