Effect of electro-chemical properties of sodium salts of various anions on their diffusional parameters in symmetrical cellulose acetate membranes

A relation was obtained between electro-chemical properties of sodium salts (NaCl, NaBr, and Na₂SO₄), and the thermodynamic property of permeability in symmetrical cellulose acetate membranes, the distribution coefficient K and the kinetic property, the overall diffusion coefficients D. K and D were obtained by the method we proposed using measured unsteady- and steady-state dialysis data. The K values increase with the increase of water content and are in the range of 10⁻² for sodium halides and 10⁻³ for Na₂SO₄. D is found to increase with the increase of the solute concentration, and the extrapolated values of D to zero concentration D⁽⁰⁾ are obtained as 0.015–0.03 μm²/s and increase with the increase of water content in the membrane. D can be divided into the concentration independent diffusion coefficients in the dense part of the membrane D_d and in the porous D_p, applying a two-part (perfect or dense and imperfect or porous) model of the membrane. Contrary to D_d, D_p increases with the increase of W_w and can be correlated as D_p,c = _d exp (γ × W_w). It is shown that the averaged D_d, _D increases with the increase of the quantity of the ionic mobility u of the solutes at infinite dilution divided by valence, and that the parameter γ increases with the increase of the ionic mobility u. The value of K increases slightly with the increase of water content and decreases with the increase of the Flory—Huggins parameter χ. The Flory—Huggins parameter χ is calculated from the measured values of distribution coefficients and data obtained from the literature. And it was found that the gradient of linear decrease of χ (λ_cation) depends on equivalent ionic conductivity of anion of salt, λ_an.     

A novel assay method for glycosphingolipid deacylase by enzyme-linked immunochemical detection of lysoglycosphingolipid

Lysoglycosphingolipids consist of a sphingoid long-chain base and monosaccharide or complex sugar, and they lack the fatty acyl group present in native glycosphingolipids. Less than 1 pmol of lyso-Forssman glycolipid and lysoganglioside GM1 were detected on a thin-layer chromatogram by an enzyme-linked immunochemical coloration method with anti-Forssman glycolipid antibody (FOM-1) and cholera toxin B subunit, respectively. Each spot between 1 and 100 pmol lyso-Forssman glycolipid was immunostained as densely as that of the same amount of native Forssman glycolipid. The density of the lyso-Forssman glycolipid spots increased proportionally with increment in the amount of lysoglycolipid. The density of spots of 0.2–100 pmol lysoganglioside GM1 was also proportional to the amount of each lyso-GM1 spot. These results indicated that less than 1 to 100 pmol of deacylated glycosphingolipid was quantifiable by the immunochemical coloration method with sugar chain-specific antibodies. Glycosphingolipid deacylase, which cleaved an amide bond between the sphingoid long-chain base and fatty acyl chain in ceramide of glycosphingolipid, was assayed by detecting the lyso-Forssman glycolipid produced. Lipophilic compounds, recovered from an aliquot of the reaction mixture of Forssman glycolipid and crude enzyme at appropriate times, were analyzed by thin-layer chromatography. It was found that lyso-Forssman glycolipid was produced in the first 1–2 h by the enzyme and production increased with incubation time. This coloration method is more sensitive and specific than the visualization method with a non-specific reagent such as orcinol-sulfuric acid reagent.     

Chemical Recognition of Partner Plant Species by Foundress Ant Queens in Macaranga–Crematogaster Myrmecophytism

The partnership in the Crematogaster–Macaranga ant–plant interaction is highly species-specific. Because a mutualistic relationship on a Macaranga plant starts with colonization by a foundress queen of a partner Crematogaster species, we hypothesized that the foundress queens select their partner plant species by chemical recognition. We tested this hypothesis with four sympatric Macaranga species and their Crematogaster plant-ant species. We demonstrated that foundress Crematogaster queens can recognize their partner Macaranga species by contact with the surface of the seedlings, that they can recognize compounds from the stem surface of seedlings of their partner plant species, and that the gas chromatographic profiles are characteristic of the plant species. These findings support the hypothesis that foundress queens of the Crematogaster plant-ant species select their partner Macaranga species by recognizing nonvolatile chemical characteristics of the stem surfaces of seedlings.     

Dielectric Depression and Dispersion in Electrophoretically Fabricated BaTiO3 Ceramic Films

Dielectric depression and dispersion were observed in BaTiO3 ceramic films fabricated by electrophoretic deposition followed by sintering. The dielectric constants were depressed down to 6800–4600 around the Curie point ( T _C ). The dielectric dispersion occurred above T _C . These dielectric properties are attributable to a surface layer formed during sintering. XRD analysis indicated that the surface layer was a hexagonal-like BaTiO₃ phase. A mixed solvent of acetylacetone and alcohol employed in the present work may have been responsible for the formation of the surface layer.     

deNOx Performance and Reaction Mechanism of the Di-Air System

The detailed reaction mechanism of Di-Air, which showed the unprecedented high deNO_x performance at high temperature conditions, was studied in this work. Since the Di-Air phenomenon occurs with continuous short pulse injections of hydrocarbons over NSR (NO_x storage and reduction) catalyst, this study focused on the specific function of HC as an effective reductant for NO_x reduction reaction. As a first step, the deNO_x performance was compared with three different reductant gases including CO, H₂ and C₃H₆ in a modified synthetic gas bench equipped with a gas injector which enables continuous small amount of injections. At inlet gas temperature of 450 °C C₃H₆ showed the best deNO_x performance whereas H₂ was the best at 150 °C. Moreover the result of temperature programmed desorption showed that intermediate species represented by –NCO (isocyanates) produced from C₃H₆ was thermally more stable than that produced from CO. These results confirmed that the injected HC reacts with adsorbed NO_x on NSR catalyst generating thermally stable intermediates, which could contribute the high deNO_x performance at high temperature conditions.     

Mixed powder coating film using thermoplastic polyester and its alkaline resistance

To improve alkaline resistance, a newly mixed powder coating film using thermoplastic polyethylene terephthalate (PET) was investigated. Two kinds of polyvinyl butyral (PVB) and two kinds of polyamide (PA) were chosen as the secondary polymer. The melting temperatures (T _ms) of these materials were lower than that of primary PET polymer so the mixed powder coating was able to form a dual phase film through a fluidized bed coating process. Microscope and Fourier transform infrared spectroscopy (FTIR) observations revealed that the dual phase structure was indeed successfully formed and there was a secondary layer over the entire surface area of the film. This mixed powder coating film significantly enhanced the alkaline resistance to an environment filled with NaOH solution at 40°C in which a secondary material would be effective in protecting the film. With regard to both alkaline resistance and film formability, PET/PVB was superior to the PET/PA mixture.     

Ethanol production from raw starch by a recombinant yeast having saccharification and fermentation activities

In order to develop a method for converting raw starch into ethanol efficiently, direct fermentation of ozonized raw starch using a recombinant yeast was investigated. Ozonolysis was carried out as a pretreatment to convert raw starch into ethanol rapidly and efficiently, and then the effect of the ozone degradation conditions on the degree of polymerization and the amount of amylose in a raw starch was determined. Since the degree of polymerization was low and the amount of amylose was high, raw starch treated with an ozone concentration of 40 gm^?3 and an ozonation time of 30 min was the material chosen for alcohol fermentation. Though the recombinant yeast could not convert the untreated raw starch, it converted the soluble starch and the ozonized raw starch at a comparatively high yield into ethanol. About 56% of the ozonized raw starch decomposed, and the ethanol concentration obtained from the ozonized raw starch was markedly greater than that obtained from untreated raw starch. The dynamic behavior of cell growth, substrate degradation, and ethanol production was examined in a continuous culture under various dilution rates, and the optimal dilution rate, ie 0.15 h^?1, was determined for maximizing the ethanol productivity (amount of ethanol produced per unit time). © 2002 Society of Chemical Industry     

Neuroprotective Effects of Liraglutide for Stroke Model of Rats

The number of diabetes mellitus (DM) patients is increasing, and stroke is deeply associated with DM. Recently, neuroprotective effects of glucagon-like peptide-1 (GLP-1) are reported. In this study, we explored whether liraglutide, a GLP-1 analogue exerts therapeutic effects on a rat stroke model. Wistar rats received occlusion of the middle cerebral artery for 90 min. At one hour after reperfusion, liraglutide or saline was administered intraperitoneally. Modified Bederson’s test was performed at 1 and 24 h and, subsequently, rats were euthanized for histological investigation. Peripheral blood was obtained for measurement of blood glucose level and evaluation of oxidative stress. Brain tissues were collected to evaluate the level of vascular endothelial growth factor (VEGF). The behavioral scores of liraglutide-treated rats were significantly better than those of control rats. Infarct volumes of liraglutide-treated rats at were reduced, compared with those of control rats. The level of derivatives of reactive oxygen metabolite was lower in liraglutide-treated rats. VEGF level of liraglutide-treated rats in the cortex, but not in the striatum significantly increased, compared to that of control rats. In conclusion, this is the first study to demonstrate neuroprotective effects of liraglutide on cerebral ischemia through anti-oxidative effects and VEGF upregulation.     

Effects of pressure and temperature on dyeing acrylic fibres with basic dyes in supercritical carbon dioxide

The dyeing of acrylic fibre with CI Basic Blue 47 has been investigated using an ammonium carboxylate perfluoropolyether as an auxiliary in order to perform the reverse micellar system in supercritical carbon dioxide media. The basic dye was satisfactorily solubilised in the interior of the reverse micelle in the system, and dyeability in the supercritical carbon dioxide media was excellent, even in the absence of a retardant and/or an acid. The optimum proton-rich condition for dyeing of acrylic fabric is performed in reverse micelle aggregates and the proton-rich water pool is suitable for dye uptake by the fibre even without the presence of additives. Changes in glass transition temperature of acrylic fibre in the carbon dioxide media also influence the dyeing behaviour of acrylic fabric.     

Feasibility of high performance in p-type Ge1−xBixTe materials for thermoelectric modules

GeTe is a promising candidate for the fabrication of high-temperature segments for p-type thermoelectric (TE) legs. The main restriction for the widespread use of this material in TE devices is high carrier concentration (up to ∼ 10²¹ cm⁻³), which causes the low Seebeck coefficient and high electronic component of thermal conductivity. In this work, the band structure diagram and phase equilibria data have been effectively used to attune the carrier concentration and to obtain the high TE performance. The Ge_1−xBi_xTe (x = 0.04) material prepared by the Spark plasma sintering (SPS) technique demonstrates a high power factor accompanied by moderate thermal conductivity. As a result, a significantly higher dimensionless TE figure of merit ZT = 2.0 has been obtained at ∼ 800 K. Moreover, we are the first to propose that application of the developed Ge_1−xBi_xTe (x = 0.04) material in the TE unicouple should be accompanied by SnTe and CoGe₂ transition layers. Only such a unique solution for the TE unicouple makes it possible to prevent the negative effects of high contact resistance and chemical diffusion between the segments at high temperatures.