Fuzzy inference and fuzzy inference processor

Fuzzy inference, a data processing method based on the fuzzy theory that has found wide use in the control field, is reviewed. Consumer electronics, which accounts for most current applications of this concept, does not require very high speeds. Although software running on a conventional microprocessor can perform these inferences, high-speed control applications require much greater speeds. A fuzzy inference date processor that operates at 200000 fuzzy logic inferences per second and features 12-b input and 16-b output resolution is described     

Flashover voltage characteristics of contaminated station insulators under temporary ac overvoltages in the ac system connected with a frequency converter station

According to the recent analysis results of temporary ac overvoltage in the ac system connected with a frequency converter station, large-magnitude over-voltages were confirmed to occur under some special system conditions. Most of the station insulators currently used cannot withstand such overvoltages according to an evaluation based on the data obtained earlier. The necessity of tests to be done to evaluate such performance more accurately was recognized. Both power frequency and switching impulse overvoltage flashover tests were made on contaminated insulators by the method well simulating the natural wetting condition. Switching impulse flashover voltage with the waveshape having a long wavefront time of 2 ms can be well correlated with the flashover voltage characteristics of temporary ac overvoltage. Higher flashover voltage characteristics were obtained by a clean fog test method compared with those obtained by equivalent fog test method.     

Pulmonary vascular disease and operative indications in complete atrioventricular canal defect in early infancy

Pulmonary vascular disease was morphometrically analyzed in 67 patients (mean age, 19 months) with isolated complete atrioventricular canal defect. Complete obstruction of the small pulmonary arterial lumen resulting from acute fibrous proliferation and atrophy of the peripheral arterial media, which were considered absolute operative contraindications, were characteristic in six patients with Down's syndrome. Morphometric analysis of medial thickness revealed that thinning of the media of the small pulmonary arteries is generally observed at around 6 months of age in patients with complete atrioventricular canal defect and that the media in patients who have complete atrioventricular canal defect and Down's syndrome was thinner than that in such patients without Down's syndrome. These results suggest that thinning of the media as a result of two factors--Down's syndrome and aging--facilitates the rapid occurrence of fibrous intimal proliferation. Therefore intracardiac repair is desirable within 6 months of life, before medial thinning, in patients with complete atrioventricular canal defect and Down's syndrome. Excluding patients with absolute operative contraindications, the scores of the index of pulmonary vascular disease in operative survivors were below 2.0 and death occurred when scores were more than 2.2. The pulmonary vascular resistances measured in room air and by the oxygen inhalation and tolazoline tests in patients with operative contraindications were more than 7.3, 3.8, and 6.6 units.m2, respectively. We thus conclude that lung biopsy should be undertaken for patients in whom pulmonary vascular resistance is beyond these values to determine the appropriateness of surgical intervention.     

The short-term effect of a smoking prevention program for the upper graders of elementary schools--the results of intervention study for two years with quasi-experimental design

The purpose of this study was to evaluate the short-term effect of a smoking prevention program for Japanese elementary school-children in the fifth and sixth grades. The program was developed with concepts found in the Know Your Body Program and the conclusions of a National Cancer Institute-convened Expert Advisory Panel, and focused on teaching about the short-term effects of smoking and on resistance to social pressures to smoke. The study was conducted with a quasi-experimental design. An intervention group (52 boys and 54 girls) received three sessions for both the fifth grade in 1992 and the sixth grade in 1993. Moreover, the intervention group received a pre-test before the first session and a post-test after the third session in each grade. A comparison group (102 boys and 91 girls) received the same tests at the same time as the intervention group, but did not receive any program on smoking prevention. The short-term effect of the program were evaluated using the results of the pre-test in the fifth grade and of the post-test in the sixth grade in both groups. The results were as follows: 1) Remarkable short-term effects of the intervention were seen in respect to awareness of the importance of not smoking in girls, and also in the knowledge of the short-term effects of smoking in both sexes. 2) The intervention was not effective with respect to intention to smoke at the age of 20 and self-efficacy of refusing to smoke in both sexes. 3) The short-term effects were not clear in the smoking behavior in both sexes because the rates of ever smokers and of monthly smokers were almost the same for two years between the intervention group and the comparison group. 4) The smoking behaviors of children, their parents and their best friends had little influence on the results of the post-test in the sixth grade.     

A CMOS integrated circuit for multichannel multiple-subjectbiotelemetry using bidirectional optical transmissions [weightlessnessin space effects application]

A CMOS integrated circuit for a noninvasive biological-signal telemetry system specified for use in medical and physiological studies of the influence of weightlessness in space is presented. The system can monitor multichannel (4 channels maximum) biological signals from multiple subjects (4 subjects maximum) in real time by using time multiplexing. A key technique so-called synchronized multiple-subject telemetry, to achieve multiple-subject telemetry has been proposed. This technique utilizes bidirectional optical transmissions with direct and scattered infrared lights between an observer and each of the subjects. An experimental CMOS IC to give a small light-weight low-power, and smart telemetry instrument for use on animals has been developed. This IC is for evaluating circuit blocks of the implantable monolithic telemetry instrument. The major circuit blocks include CMOS digital circuits for synchronization, subject selection and time multiplexing, analog circuits for pulse interval modulation, and other blocks such as a CMOS optical pulse receiver and an LED driver. A preliminary experimental multichannel telemetry from two subjects has been performed with the implemented IC chips, and the principal operation of the multiple-subject optical biotelemetry has been demonstrated     

Radiative ignition mechanism of solid fuels

Transmittance of external radiation from a CO₂ laser through a boundary layer of decomposition products over a vertical sample surface is measured during the ignition period. The results indicate that there is significant absorption of the external radiation for PMMA, and a lesser but still not negligible amount, for red oak. An increase in gas phase temperature over surface temperature is observed over much of the ignition interval. Using the experimentally measured incident flux at the sample surface, surface temperature history was calculated from a model that included re-radiation and convection losses from the surface, endothermic decomposition and conduction into the material. The results confirm the significant effect of gas phase absorption on surface temperature. Steady-state-derived surface regression rate expression was used for PMMA in this model. The results raise questions about the validity of such data for the dynamic heating conditions during the ignition period. Further studies needed to understand the radiative ignition mechanism are identified.     

Ru-catalyzed anode materials for direct hydrocarbon SOFCs

A solid oxide fuel cell using a thin ceria-based electrolyte film with a Ru-catalyzed anode was directly operated on hydrocarbons, including methane, ethane, and propane, at 600 °C. The role of the Ru catalyst in the anode reaction was to promote the reforming reaction of the unreacted hydrocarbons by the produced steam and CO₂, which avoided interference from steam and CO₂ in the gas-phase diffusion of the fuels. The resulting peak power density reached 750 mW cm⁻² with dry methane, which was comparable to the peak power density of 769 mW cm⁻² with wet (2.9 vol.% H₂O) hydrogen. More important was the fact that the cell performance was maintained at a high level regardless of the change in the methane utilization from 12 to 46% but was significantly reduced by increasing the hydrogen utilization from 13 to 42%. While the anodic reaction of hydrogen was controlled by the slow gas diffusion, the anodic reaction of methane was not subject to the onset of such a gas-diffusion process.     

Advanced process device technology for 0.3-μm high-performancebipolar LSIs

A new method is developed for forming shallow emitter/bases, collectors, and graft bases suitable for high-performance 0.3-μm bipolar LSIs. Fabricated 0.5-μm U-SICOS (U-groove isolated sidewall base contact structure) transistors are 44 μm², and they have an isolation width of 2.0 μm, a minimum emitter width of 0.2 μm, a maximum cutoff frequency (f_T) of 50 GHz, and a minimum ECL gate delay time of 27 ps. The key points for fabricating high-performance 0.3-μm bipolar LSIs are the control of the graft base depth and the control of the interfacial layer between emitter poly-Si and single-Si. The importance of a tradeoff relation between f_T and base resistance is also discussed     

A 6-ns ECL 100 K I/O and 8-ns 3.3-V TTL I/O 4-Mb BiCMOS SRAM

The authors report a 4 M word×1 b/1 M word×4 b BiCMOS SRAM that can be metal mask programmed as either a 6-ns access time for an ECL 100 K I/O interface to an 8-ns access time for a 3.3-V TTL I/O interface. Die size is 18.87 mm×8.77 mm. Memory cell size is 5.8 μm×3.2 μm. In order to achieve such high-speed address access times the following technologies were developed: (1) a BiCMOS level converter that directly connects the ECL signal level to the CMOS level; (2) a high-speed BiCMOS circuit with low threshold voltage nMOSFETs; (3) a design method for determining the optimum number of decoder gate stages and the optimum size of gate transistors; (4) high-speed bipolar sensing circuits used at 3.3-V supply voltage; and (5) 0.55-μm BiCMOS process technology with a triple-well structure