Effects of winding connections on characteristics of a five‐phase stepping motor

A method for calculating the single‐step response of five‐phase hybrid stepping motors is obtained. The effects of winding connecting methods—(1) star‐bipolar SB, (2) pentagon PD, and (3) new pentagon NP—on the single‐step response are investigated. By application of the above calculation method, the continuous rotating characteristics are studied. It is found that the maximum slewing pulse rate of NP is higher than that of SB and PD connections, and that the variation of the rotor speed at high speed with the SB and PD connections is larger than that with the NP connection. The effects of the current waveform on the oscillation characteristics and relations between the current waveform and the winding connections are investigated. © 2001 Scripta Technica, Electr Eng Jpn, 136(1): 47–56, 2001     

Dynamic finite element simulation of the gunshot injury to the human forehead protected by polyvinyl alcohol sponge

Although there are some traditional models of the gunshot wounds, there is still a need for more modeling analyses due to the difficulties related to the gunshot wounds to the forehead region of the human skull. In this study, the degree of damage as a consequence of penetrating head injuries due to gunshot wounds was determined using a preliminary finite element (FE) model of the human skull. In addition, the role of polyvinyl alcohol (PVA) sponge, which can be used as an alternative to reinforce the kinetic energy absorption capacity of bulletproof vest and helmet materials, to minimize the amount of skull injury due to penetrating processes was investigated through the FE model. Digital computed tomography along with magnetic resonance imaging data of the human head were employed to launch a three-dimensional (3D) FE model of the skull. Two geometrical shapes of projectiles (steel ball and bullet) were simulated for penetrating with an initial impact velocity of 734 m/s using nonlinear dynamic modeling code, namely LS-DYNA. The role of the damaged/distorted elements were removed during computation when the stress or strain reached their thresholds. The stress distributions in various parts of the forehead and sponge after injury were also computed. The results revealed the same amount of stress for both the steel ball and bullet after hitting the skull. The modeling results also indicated the time that steel ball takes to penetrate into the skull is lower than that of the bullet. In addition, more than 21 % of the steel ball’s kinetic energy was absorbed by the PVA sponge and, subsequently, injury sternness of the forehead was considerably minimized. The findings advise the application of the PVA sponge as a substitute strengthening material to be able to diminish the energy of impact as well as the load transmitted to the object.     

Electrochemical studies of zirconium and hafnium in alkali chloride and alkali fluoride-chloride molten salts

The electrochemical reduction of zirconium and hafnium in alkali chloride or fluoride-chloride molten salts on platinum electrodes has been investigated by means of linear and cyclic voltammetry. It has been found that fluoride ions greatly influenced the reduction of zirconium and hafnium in fluoride-chloride melts. It has been proposed that the mechanism for reduction of zirconium and hafnium in baths containing a low concentration of fluoride compounds is different from the mechanism in baths containing a higher fluoride concentration.     

Syntheses and Electronic Behaviors of Networked Alternating Aluminum-organic Moiety Hybrid Copolymers

Hybrid copolymers with aluminum-organic moiety frameworks were successfully prepared by reacting aluminum tri-sec-butoxide with several organic diols. The compositions of the resulting copolymers were determined using IR spectroscopy, ICP, elemental analysis and CP/MASS ¹³C-NMR spectroscopy. The UV-VIS spectra of the copolymers were also obtained. ESR spectral examinations of the copolymers and ab-initio calculations of the copolymer models indicate that an electron transfer takes place from the organic moiety to the aluminum atom in the framework.     

The compression of rigid-perfectly-plastic material between rough parallel dies of unequal width

The results are given of calculations of the pressure to compress plastically, ideal material between perfectly rough parallel plates of variously unequal widths which do not overhang the material and in which the die width exceeds the material thickness. The rate of approach of the dies is also stated for certain die parameters. A particular solution is also given for the case when there is less than shearing friction between the material and the plates.     

Mechanism‐Based Trapping of the Quinonoid Intermediate by Using the K276R Mutant of PLP‐Dependent 3‐Aminobenzoate Synthase PctV in the Biosynthesis of Pactamycin

Mutational analysis of the pyridoxal 5′‐phosphate (PLP)‐dependent enzyme PctV was carried out to elucidate the multi‐step reaction mechanism for the formation of 3‐aminobenzoate (3‐ABA) from 3‐dehydroshikimate (3‐DSA). Introduction of mutation K276R led to the accumulation of a quinonoid intermediate with an absorption maximum at 580 nm after the reaction of pyridoxamine 5′‐phosphate (PMP) with 3‐DSA. The chemical structure of this intermediate was supported by X‐ray crystallographic analysis of the complex formed between the K276R mutant and the quinonoid intermediate. These results clearly show that a quinonoid intermediate is involved in the formation of 3‐ABA. They also indicate that Lys276 (in the active site of PctV) plays multiple roles, including acid/base catalysis during the dehydration reaction of the quinonoid intermediate.     

Nanoparticle formation in H2O/N2 and H2O/Ar mixtures under irradiation by 20 MeV protons and positive corona discharge

To investigate the contribution of ions to gas nucleation, we have performed experiments on the formation of water droplets in H₂O/N₂ and H₂O/Ar gas mixtures by irradiation with a 20 MeV proton beam and by positive corona discharge. The size of the formed nanoparticles was measured using a differential mobility analyzer equipped with a Faraday cup electrometer. Using the proton beam, droplets around 10 nm in diameter were observed for both positively and negatively charged particles, but none were found when the corona discharge was used. This implies the importance of the presence of both positive and negative ions for the formation of nanosize droplets, which attract each other by Coulomb interactions, enhancing the collision frequency and leading to the formation of the 10 nm droplets.     

Homogeneous and Disordered Assembly of Densely Packed Nanocrystals

A homogeneous and disordered assembly of densely packed nanocrystals is generated without the assistance of organic molecules, from an aqueous solution at room temperature. The densely packed nanocrystals of tin dioxide (SnO₂) and titanium dioxide (TiO₂), 2–3 nm in size, form glassy macroscopic transparent objects of 2–10 mm. The monodisperse nanocrystals, which have a surface hydrated layer and are synthesized in aqueous solution, are densely packed in an homogeneous and disordered assembly through the evaporation of water as the dispersion medium. The formation of transparent bulk objects on the macroscopic scale originates from the homogeneous and disordered nature of the densely packed nanocrystals. The resultant homogeneous architectures are distinguishable from the typical inhomogeneous and disordered aggregates of nanoparticles observed after evaporation of the dispersion medium. Among superstructures based on nanocrystals, such as superlattices and mesocrystals, the resultant homogeneous and disordered assembly can be regarded as a new class of solid‐state material.     

Cloning and Characterization of the Biosynthetic Gene Cluster of 16‐Membered Macrolide Antibiotic FD‐891: Involvement of a Dual Functional Cytochrome P450 Monooxygenase Catalyzing Epoxidation and Hydroxylation

FD‐891 is a 16‐membered cytotoxic antibiotic macrolide that is especially active against human leukemia such as HL‐60 and Jurkat cells. We identified the FD‐891 biosynthetic (gfs) gene cluster from the producer Streptomyces graminofaciens A‐8890 by using typical modular type I polyketide synthase (PKS) genes as probes. The gfs gene cluster contained five typical modular type I PKS genes (gfsA, B, C, D, and E), a cytochrome P450 gene (gfsF), a methyltransferase gene (gfsG), and a regulator gene (gfsR). The gene organization of PKSs agreed well with the basic polyketide skeleton of FD‐891 including the oxidation states and α‐alkyl substituent determined by the substrate specificities of the acyltransferase (AT) domains. To clarify the involvement of the gfs genes in the FD‐891 biosynthesis, the P450 gfsF gene was inactivated; this resulted in the loss of FD‐891 production. Instead, the gfsF gene‐disrupted mutant accumulated a novel FD‐891 analogue 25‐O‐methyl‐FD‐892, which lacked the epoxide and the hydroxyl group of FD‐891. Furthermore, the recombinant GfsF enzyme coexpressed with putidaredoxin and putidaredoxin reductase converted 25‐O‐methyl‐FD‐892 into FD‐891. In the course of the GfsF reaction, 10‐deoxy‐FD‐891 was isolated as an enzymatic reaction intermediate, which was also converted into FD‐891 by GfsF. Therefore, it was clearly found that the cytochrome P450 GfsF catalyzes epoxidation and hydroxylation in a stepwise manner in the FD‐891 biosynthesis. These results clearly confirmed that the identified gfs genes are responsible for the biosynthesis of FD‐891 in S. graminofaciens.