DC to 10-GHz mixer and amplifier GaAs IC's for coherent opticalheterodyne receiver

The authors describe a number of design techniques that are effective for enhancing sensitivity and bandwidth. A Gilbert-cell circuit with a single-to-balance conversion input buffer and a peaking circuit are adopted for the mixer. In addition, a wideband amplifier is proposed that adopts a novel multiple-feedback cascode FET amplifier configuration with an LC input matching network. Finally, a novel interconnection technique is proposed that improves impedance matching between ICs and the package over a wide frequency range up to 10 GHz. These ICs were fabricated using a 0.2-μm gate self-aligned GaAs MESFET process. These techniques could enable a highly sensitive multigigabit-per-second coherent optical heterodyne receiver to be implemented     

An 8 ns 4 Mb serial access memory

A new architecture for serial access memory is described that enables a static random access memory (SRAM) to operate in a serial access mode. The design target is to access all memory address serially from any starting address with an access time of less than 10 ns. This can be done by all initializing procedure and three new circuit techniques. The initializing procedure is introduced to start the serial operation at an arbitrary memory address. Three circuit techniques eliminate extra delay time caused by an internal addressing of column lines, sense amplifiers, word lines, and memory cell blocks. This architecture was successfully implemented in a 4-Mb CMOS SRAM using a 0.6 μm CMOS process technology. The measured serial access time was 8 ns at a single power supply voltage of 3.3 V     

Photovoltaic display module in a mobile GPS

We have developed a mobile global positioning system (GPS) that operates on just photovoltaic (PV) cells. The system receives wireless signals from satellites and shows one's present location accurately on a map without the need for a battery. A PV display module, which combines a transparent LCD with a-Si PV cells and has a power generation function, is added to ordinary PV cells to increase the total amount of power generated. The PV display module enables 40% more power generation than a system without the module.     

Perovskite-type oxides La1−xSrxMnO3 for cathode catalysts in direct ethylene glycol alkaline fuel cells

Carbon-supported La_1−xSr_xMnO₃ (LSM/C) was prepared by reversible homogeneous precipitation method, and its catalytic activities for oxygen reduction under the existence of ethylene glycol (EG) were investigated by using rotating disk electrode. LSM/C exhibited the high activity for oxygen reduction irrespective with the presence of EG, indicating that EG is not oxidized by LSM/C at the cathode side in the present system. Consequently, LSM/C can serve as a cathode catalyst in alkaline direct alcohol fuel cells with no crossover problem. Performance test for fuel cells operation also supported these results and showed cathodic polarization curves were not affected by the concentration of EG supplied to anode even at 5 mol dm⁻³.     

All solid-state battery with sulfur electrode and thio-LISICON electrolyte

A high-capacity type of all solid-state battery was developed using sulfur electrode and the thio-LISICON electrolyte. New nano-composite of sulfur and acetylene black (AB) with an average particle size of 1–10 nm was fabricated by gas-phase mixing and showed a reversible capacity of 900 mAh g⁻¹ at a current density of 0.013 mA cm⁻².     

The effect of thiophene sequence separation on air-stable organic thin-film transistor materials

The relationship between thiophene sequences and organic thin-film transistor (OTFT) characteristics was studied to determine their effect on ionization potential, molecular orientation, and air stability. Two types of molecular structures were used: continuous sequence and divided sequence thiophenes. The length of thiophene sequence did not affect FET characteristics but did affect ionic potential and air stability. Furthermore, materials with divided thiophene sequences showed no change in OTFT characteristics when exposed to air. These results suggest that separation of thiophene sequences can improve air stability, which is a problem of thiophene-based materials.     

A new design of a linear local-feedback MOS transconductor for low frequency applications

For medical devices, low frequency and low power applications are required, and a transconductor which has a low transconductance is needed. A conventional current division scheme for the low transconductance wastes operating current. This paper proposes an improved local-feedback MOS transconductor operating in subthreshold region. The proposed transconductor is optimally designed using maximally flat approximation method, Newton-Raphson method, and Downhill simplex method. From the optimization, two optimum values are obtained. Characteristics of the proposed transconductor are confirmed by simulation. Transfer characteristics of the proposed transconductor are linear, and the power consumption of the proposed transconductor is 1/60 as compared with the presented transconductor using current division scheme. The CMRR is around 70 dB, and the THD is lower than ?55 dB under a condition of that the frequency of the sinusoidal input is 100 Hz. As a demonstration of an application, the proposed transconductor is applied to a low frequency second order Butterworth filter. A cutoff frequency of the filter is 100 Hz. Simulation results show validities and availability of the proposed transconductor.     

Conditional Data Mapping Flip-Flops for Low-Power and High-Performance Systems

This paper introduces a new family of low-power and high-performance flip-flops, namely conditional data mapping flip-flops (CDMFFs), which reduce their dynamic power by mapping their inputs to a configuration that eliminates redundant internal transitions. We present two CDMFFs, having differential and single-ended structures, respectively, and compare them to the state-of-the-art flip-flops. The results indicate that both CDMFFs have the best power-delay product in their groups, respectively. In the aspect of power dissipation, the single-ended and differential CDMFFs consume the least power at data activity less than 50%, and are 31% and 26% less power than the conditional capture flip-flops at 25% data activity, respectively. In the aspect of performance, CDMFFs achieve small data-to-output delays, comparable to those of the transmission-gate pulsed latch and the modified-sense-amplifier flip-flop. In the aspect of timing reliability, CDMFFs have the best internal race immunity among pulse-triggered flip-flops. A post-layout case study is demonstrated with comparison to a transmission-gate flip-flop. The results indicate the single-ended CDMFF has 34% less in data-to-output delay and 28% less in power at 25% data activity, in spite of the 34% increase in size     

Automated detection of pulmonary nodules in helical CT images based on an improved template-matching technique

The purpose of this study is to develop a technique for computer-aided diagnosis (CAD) systems to detect lung nodules in helical X-ray pulmonary computed tomography CT) images. We propose a novel template-matching technique based on a genetic algorithm (GA) template matching (GATM) for detecting nodules existing within the lung area; the GA was used to determine the target position in the observed image efficiently and to select an adequate template image from several reference patterns for quick template matching. In addition, a conventional template matching was employed to detect nodules existing on the lung wall area, lung wall template matching (LWTM), where semicircular models were used as reference patterns; the semicircular models were rotated according to the angle of the target point on the contour of the lung wall. After initial detecting candidates using the two template-matching methods, we extracted a total of 13 feature values and used them to eliminate false-positive findings. Twenty clinical cases involving a total of 557 sectional images were used in this study. 71 nodules out of 98 were correctly detected by our scheme (i.e., a detection rate of about 72%), with the number of false positives at approximately 1.1/sectional image. Our present results show that our scheme can be regarded as a technique for CAD systems to detect nodules in helical CT pulmonary images.     

A spherical aberration-corrected 200 kV TEM

A spherical aberration (Cs)-corrected 200 kV TEM was newly developed. The column of the microscope was extended by 25 cm and the inner yoke of the objective lens was modified to insert some parts of the corrector elements. The corrector has two hexapole elements that play a main role in Cs correction and they are placed at a position equivalent to the coma-free point of the objective lens by using two transfer doublet lenses. The Cs correction was successfully carried out by means of the third-order aberration that was generated in the two extended hexapoles. The Cs can be corrected to the desired value and also can be overcompensated in order to produce a negative Cs, as with the corrected Cs of -23 microm shown in this work. The optical system of the corrector does not produce second- and fourth-order aberrations, and can correct residual aberrations up to the third order. All of the corrector elements are computer-controlled and the third-order aberrations are quite stable after they are properly corrected. The resolution of 0.135 nm was experimentally confirmed by the Young's fringe method. Image simulations of a silicon [110] single crystal were made with various Cs and defocus values to demonstrate the effectiveness of arbitral control of Cs.