Fabrication and operation limit of lead-free PTCR ceramics using BaTiO3–(Bi1/2Na1/2)TiO3 system

The electric properties of BaTiO₃–(Bi_1/2Na_1/2)TiO₃ (BT–BNT) solid solution ceramics were studied as a lead-free PTCR (positive temperature coefficient of resistivity) thermistor material usable over 130°C. For determining the maximum switching temperature T _s, the phase diagram of BT–BNT binary system was clarified. Two semiconductorization processes and their electric properties are described. The lanthanum(La)-doped BBNT ceramics sintered in air still showed dielectric behaviors, but the niobium(Nb)-doped ones had a low resistivity at room temperature, ρ _RT, on the order of 10³ Ωcm and showed a PTC behavior. Sintering under a low O₂ atmosphere produces BT–BNT ceramics with less than 10² Ωcm compared to those prepared in air. Our current research produced the BBNT ceramics with T _s values around 210°C by increasing the (Bi_1/2Na_1/2) content in the ceramics.     

The Effect of Air Foam Inclusion on the Permeability and Absorption Properties of Light Weight Soil

Cement-treated clay with air foam, which is called Super Geo-Material (SGM), was developed to utilize dredged clay in an effective way. As SGM is mainly used at levels below the ground water table, water permeability and absorption properties of SGM will affect the durability of the material. In this research, the changes in SGM permeability and absorption as functions of the air foam fraction were investigated. First, permeability tests with triaxial apparatus and constant rate of consolidation tests were conducted on samples containing less than 10% of air foam by volume. From the results, air foam was found to be an impermeable medium in SGM. Secondly, a series of permeability tests and absorption tests were conducted for the SGM with different fractions of air foam while observing the specimen with a micro focus X-ray Computed Tomography (CT) scanner. The results showed that the permeability of SGM increased dramatically due to the appearance of interior water channels when the air foam fraction exceeded 30% by volume. The density distribution change and water absorbed zones of the specimens during absorption tests were estimated using the X-ray CT data. From these results, the air in the SGM was found to be progressively substituted with water from the surface to the inside of the specimen and the substituted zone expanded as it made its way to the specimen interior. The expansion velocity of the substituted zone was not affected by the coefficient of permeability but by the fraction of the air in the specimen.     

Glare Generation Based on Wave Optics

This paper proposes a novel and general method of glare generation based on wave optics. A glare image is regarded as a result of Fraunhofer diffraction, which is equivalent to a 2D Fourier transform of the image of given apertures or obstacles. In conventional methods, the shapes of glare images are categorized according to their source apertures, such as pupils and eyelashes and their basic shapes (e.g. halos, coronas, or radial streaks) are manually generated as templates, mainly based on statistical observation. Realistic variations of these basic shapes often depend on the use of random numbers. Our proposed method computes glare images fully automatically from aperture images and can be applied universally to all kinds of apertures, including camera diaphragms. It can handle dynamic changes in the position of the aperture relative to the light source, which enables subtle movement or rotation of glare streaks. Spectra can also be simulated in the glare, since the intensity of diffraction depends on the wavelength of light. The resulting glare image is superimposed onto a given computer‐generated image containing high‐intensity light sources or reflections, aligning the center of the glare image to the high‐intensity areas. Our method is implemented as a multipass rendering software. By precomputing the dynamic glare image set and putting it into texture memory, the software runs at an interactive rate.     

Uniform carbon‐nanotube emitter for field‐emission displays

Abstract— The synthesis of carbon‐nanotube (CNT) field emitters for FEDs by thermal chemical vapor deposition (CVD) and their structural and emission characterization are described. Multi‐walled nanotubes (MWNTs) were grown on patterned metal‐base electrodes by thermal CVD, and the grown CNTs formed a network structured layer covering the surfaces of the metal electrode uniformly, which realized uniform distribution of electron emission. A technique for growing narrow MWNTs was also developed in order to reduce the driving voltage. The diameter of MWNT depends on the growth temperature, and it has changed from 40 nm at the low temperature (675°C) to 10–15 nm at the high temperature (900–1000°C). Moreover, narrower MWNTs were grown by using the metal‐base electrode covered with a thin alumina layer and a metal catalyst layer. Double‐walled nanotubes (DWNTs) were also observed among narrow MWNTs. The emission from the narrow CNTs showed a low turn‐on electric field of 1.5 V/μm at the as‐grown layer.     

Fatigue behavior of carburized steel with internal oxides and nonmartensitic microstructure near the surface

The characteristic fatigue behavior of carburized and quenched steel with internal oxides and non-martensitic microstructure near the surface was presented through rotating bending fatigue test. The S-N diagram revealed two knees and the specimens continued to fail over 10⁷ stress cycles. The fatigue limit could not be obtained even at 10⁸ stress cycles. The test results were compared to those for the specimens without surface structure anomalies to show the effect of structure anomalies on the fatigue behavior of carburized steel.     

Topical Phenomena Observed in a Short-Gap Atmospheric Discharge Using Rotor and Post Electrodes

Correlation of light emission, discharge structure, waveform of the discharge current, electrode configuration, and electromagnetic radiation is examined with the intent of obtaining an effective means for preventing electromagnetic interference (EMI) due to a short-gap discharge. The electromagnetic radiation (EMR) level resulting from a current step which, in turn, was formed by a discrete movement of a cathode spot was clearly recognized. A combination of needle rotor and needle post gave the smallest electromagnetic radiation level in the experiments.     

Finite strip analysis of curved composite girders with incomplete interaction

This paper presents a finite strip analysis of curved composite girders with incomplete interaction. In the present analysis curved composite girder bridges are modelled by curved strip elements for the concrete slab and steel girder and spring elements for the shear connectors. The shear connectors are assumed as a two-dimensional spring element along the nodal line. The proposed method is applied to the analysis of curved box girders, curved plates and curved composite girder bridges with complete and incomplete interaction. Some analytical results obtained by this method are compared with the test results and theoretical values obtained by other methods, and they are in good agreement. Slip behavior of curved composite box girders is also discussed based on the results by the proposed method.     

The relationship between ductility and grain-boundary precipitates in an Al-6.0% Zn-2.6% Mg alloy

The relationship between ductility and material parameters such as grain-boundary (GB) precipitate size and dimple size in an Al-6.0% Zn-2.6% Mg alloy has been studied. Under the condition of a given GB precipitate size, the ductility increases with decreasing number of GB precipitates and dimples per unit area. The critical GB precipitate sizes acting as the nuclei for void formation are deduced.