Role of Specimen Geometry in the Effect of Fiber Orientation on the Thermal Conductivity of a Uniaxial Carbon-Fiber-Reinforced Aluminoborosilicate Glass-Matrix Composite

A study concerning the effect of fiber orientation on the thermal conductivity of a uniaxial carbon-fiber-reinforced borosilicate glass was conducted. For thin specimens, and thick specimens with specimen sides cut parallel to the fiber direction, the dependence of thermal conductivity on fiber orientation showed excellent agreement with theoretical behavior predicted for a composite infinite in extent. In contrast, the thermal conductivity data for rectangular thick specimens fell well below the data for the thin and angled specimens. For fiber orientation of 45° and higher, at which the heat was directed toward the side of the specimen rather than across, the thermal conductivity values showed excellent agreement with theoretical behavior predicted for a finite composite strip with insulated sides.     

Effects of Particle Size of Bulk Drug and food on the Bioavailability of U-78875 in Dogs

The effects of particle size and food on the absolute bioavailability of U-78875 in dogs after oral administration of either a suspension or tablet dosage form were investigated. A reduction of particle size caused a significant increase in bioavailability along with an increase in dissolution rate. Additionally, both suspension and tablet dosage forms administered after food caused an increase in bioavailability. Thus, to accelerate drug dissolution, a reduction of U-78875 particle size from the unmilled state is important for the optimization of formulation compositions. To increase the bioavailability of U-78875, postprandial dosing should be considered.     

Development of calibration models for quality control in the production of ethylene/propylene copolymers by FTIR spectroscopy,multivariate statistical tools,and artificial neural networks

Principal component regression (PCR), partial least squares (PLS), StepWise ordinary least squares regression (OLS), and back‐propagation artificial neural network (BP‐ANN) are applied here for the determination of the propylene concentration of a set of 83 production samples of ethylene–propylene copolymers from their infrared spectra. The set of available samples was split into (a) a training set, for models calculation; (b) a test set, for selecting the correct number of latent variables in PCR and PLS and the end point of the training phase of BP‐ANN; (c) a production set, for evaluating the predictive ability of the models. The predictive ability of the models is thus evaluated by genuine predictions. The model obtained by StepWise OLS turned out to be the best one, both in fitting and prediction. The study of the breakdown number of samples to be included in the training set showed that at least 52 experiments are necessary to build a reliable and predictive calibration model. It can be concluded that FTIR spectroscopy and OLS can be properly employed for monitoring the synthesis or the final product of ethylene–propylene copolymers, by predicting the concentration of propylene directly along the process line. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The influence of strontium on porosity formation in Al-Si alloys

Strontium modification is known to alter the amount, characteristics, and distribution of porosity in Al-Si castings. Although many theories have been proposed to account for these effects, most can be considered inadequate because of their failure to resolve contradictions and discrepancies in the literature. In an attempt to critically appraise some of these theories, the amount, distribution, and morphology of porosity were examined in sand-cast plates of Sr-free and Sr-containing pure Al, Al-1 wt pct Si, and Al-9 wt pct Si alloys. Statistical significance testing was used to verify apparent trends in the porosity data. No apparent differences in the amount, distribution, and morphology of porosity were observed between Sr-free and Sr-containing alloys with no or very small eutectic volume fractions. However, Sr modification significantly changed the amount, distribution, and morphology of porosity in alloys with a significant volume fraction of eutectic. The addition of Sr reduced porosity in the hot spot region of the casting, and the pores became well dispersed and rounded. This result can be explained by considering the combined effect of the casting design and the differences in the pattern of eutectic solidification between unmodified and Sr-modified alloys.     

Hybrid photocatalytic membranes embedding decatungstate for heterogeneous photooxygenation

The incorporation of decatungstate in polymeric membranes provides new heterogeneous photocatalysts for the oxidation of organic substrates under oxygen atmosphere at 25 °C. Photocatalytic membranes have been prepared yielding polymeric films with a high thermal, chemical and mechanical stability (PVDF, PDMS, Hyflon). Surface spectroscopy techniques including transmittance and reflectance UV-Vis and FT-IR have been used to assess the photocatalyst integrity within the polymeric support. Catalyst screening has been performed under both homogeneous and heterogeneous photooxygenation conditions. The photocatalyst activity has been evaluated in terms of the substrate conversion, turnover numbers, and recycling experiments. A membrane induced selectivity behavior has been evidenced by comparison with homogeneous oxidations.     

Congenital adrenal hyperplasia presenting as massive adrenal incidentalomas in the sixth decade of life: report of two patients with 21-hydroxylase deficiency

Divergent recommendations exist regarding the evaluation of adrenal incidentalomas. Recent data have indicated a prevalence of adrenal tumors of 71% in nonclassical congenital adrenal hyperplasia (CAH) and unmasked heterozygotes. These data expand the differential diagnosis of such incidental tumors and substantially modify the approach to their evaluation. We present two patients, female pseudohermaphrodites with the simple virilizing form of CAH and 21-hydroxylase deficiency, who functioned successfully as married phenotypic males. Both came to medical attention in the sixth decade by virtue of massive adrenal incidentalomas encountered in the evaluation of recurrent urinary tract infections. Each had a 46, XX karyotype, no palpable testes, and markedly elevated baseline levels of 17-hydroxyprogesterone (17-OH Prog) of 6086 ng/dL and 6750 ng/dL. Both responded appropriately to dexamethasone suppression with reduction of 17-OH Prog, androgens and, in the second patient, ACTH to normal or near normal levels. Histologic and autopsy examination of the first patient's tumor and computed tomographic characteristics of the second revealed a benign adenoma and myelolipoma respectively. We extend and confirm previous recommendations that CAH be included in the differential diagnosis of adrenal incidentaloma and that baseline 17-OH Prog. levels be obtained, with ACTH stimulation if necessary, to diagnose the presence of nonclassical CAH.     

Dissecting cAMP binding domain A in the RIalpha subunit of cAMP-dependent protein kinase. Distinct subsites for recognition of cAMP and the catalytic subunit

The two gene-duplicated cAMP binding domains in the regulatory subunits of cAMP dependent protein kinase are each comprised of an A helix, an eight-stranded beta-barrel, and a B and C helix (1). The A domain is required for high affinity binding to C, while the B domain regulates access to the A domain. Using a combination of a yeast two-hybrid screen coupled with deletion analysis, cAMP binding domain A of RI was dissected into two structurally and functionally distinct subsites, one that binds cAMP and another that binds the C subunit. The minimum stable subdomain required for binding to C in the 1-3 micromolar range is composed of residues 94-169, while residues 236-244, mapped to the C helix of cAMP binding domain A, were defined as a second surface necessary for high affinity (5-10 nanomolar) binding to C. This portion of the C helix, due to its position directly between the two subsites, serves as a molecular switch for either a cAMP-bound conformation or a C-bound conformation and can thus modulate interactions of cAMP binding domain A with cAMP, with C, and with cAMP binding domain B.