Thermal evaluation of vertical greenery systems for building walls

This research involves the study of 8 different vertical greenery systems (VGSs) installed in HortPark to evaluate the thermal impacts on the performance of buildings and their immediate environment based on the surface and ambient temperatures. VGSs 3 and 4 have the best cooling efficiency according to the maximum temperature reduction of the wall and substrate surfaces. These results point to the potential thermal benefits of vertical greenery systems in reducing the surface temperature of buildings facades in the tropical climate, leading to a reduction in the cooling load and energy cost. In terms of the lowest diurnal range of average wall surface temperature fluctuation, VGSs 4 and 1 show the highest capacities. No vertical greenery system performs well in term of the diurnal range of average substrate temperature fluctuation. By limiting the diurnal fluctuation of wall surface temperatures, the lifespan of building facades is prolonged, slowing down wear and tear as well as savings in maintenance cost and the replacement of façade parts. The effects of vertical greenery systems on ambient temperature are found to depend on specific vertical greenery systems. VGS 2 has hardly any effect on the ambient temperature while the effects of VGS 4 are felt as far as 0.60 m away. Given the preponderance of wall facades in the built environment, the use of vertical greenery systems to cool the ambient temperature in building canyons is promising. Furthermore, air intakes of air-conditioning at a cooler ambient temperature translate into saving in energy cooling load.     

Test bed for power amplifier behavioral characterization and modeling

Traditional test bed of power amplifier (PA) behavioral characterization and modeling based on vector signal analyzer (VSA) and often equipped with specialized software is both expensive and inflexible to modify to suit different scenarios. In this paper, a new test bed based on an oscilloscope or other general purpose data acquisition systems, which works as analog to digital converter (ADC) with a proper (radio frequency) RF bandwidth and maximum sampling rate, is proposed. The common impairments, e.g. transmitter IQ imbalances, channel delay, frequency offset, and carrier phase offset, are all well compensated. The accurately recovered envelopes of the PA’s input and output signals are used for a PA behavioral characterization and modeling. Furthermore, Relative envelope error (REE) parameter is proposed to evaluate the accuracy of envelope recovery. The experiment shows a very accurate RF signal envelope recovery, and a good performance of PA behavioral modeling.     

Towards the detection of human papillomavirus infection by a reagentless electrochemical peptide biosensor

In the present work, we report first results about a technology using a conjugated copolymer poly(5-hydroxy-1,4-naphthoquinone-co-5-hydroxy-2-carboxyethyl-1,4-naphthoquinone) acting both as immobilizing and transducing element for reagentless immunosensor, and its application for the detection of HPV infection. It was shown that the reagentless immunosensor was able to detect the interaction between antigenic peptide L1 from HPV-16 major capsid protein, a dominant epitope involved in viral infection as well as in prophylactic vaccine, and the relevant antibody.     

Red yeast barley reduces plasma glucose levels and activates AMPK phosphorylation in <Emphasis Type="Italic">db/db</Emphasis> mice

Red yeast (Monascus purpureus) fermented over rice has a limited hypoglycemic activity. To enhance its glucose-lowering effect, we fermented red yeast over waxy barley, a hypoglycemic grain with high levels of fibers and β-glucans, and investigated the metabolic effects of red yeast barley (RYB) in high-fat-fed hyperglycemic db/db mice for 6 weeks. The fasting glucose levels were significantly reduced in the RYB group at 6 weeks by 25% (p<0.05), as was the glucose tolerance (−27% of area under the curve in RYB vs. controls, p<0.05). Plasma insulin levels and the expression of PPAR-γ were unaltered, however, the phosphorylation activation of hepatic AMP-activated protein kinase (AMPK) was increased significantly in RYB group compared with controls suggesting that hypoglycemic effect of RYB may be achieved by AMPK-dependent mechanism. RYB may be used as a hypoglycemic functional food modulating cellular AMPK activity.     

Nebulized Gadolinium‐Based Nanoparticles: A Theranostic Approach for Lung Tumor Imaging and Radiosensitization

Lung cancer is the most common and most fatal cancer worldwide. Thus, improving early diagnosis and therapy is necessary. Previously, gadolinium‐based ultra‐small rigid platforms (USRPs) were developed to serve as multimodal imaging probes and as radiosensitizing agents. In addition, it was demonstrated that USRPs can be detected in the lungs using ultrashort echo‐time magnetic resonance imaging (UTE‐MRI) and fluorescence imaging after intrapulmonary administration in healthy animals. The goal of the present study is to evaluate their theranostic properties in mice with bioluminescent orthotopic lung cancer, after intrapulmonary nebulization or conventional intravenous administration. It is found that lung tumors can be detected non‐invasively using fluorescence tomography or UTE‐MRI after nebulization of USRPs, and this is confirmed by histological analysis of the lung sections. The deposition of USRPs around the tumor nodules is sufficient to generate a radiosensitizing effect when the mice are subjected to a single dose of 10 Gy conventional radiation one day after inhalation (mean survival time of 112 days versus 77 days for irradiated mice without USRPs treatment). No apparent systemic toxicity or induction of inflammation is observed. These results demonstrate the theranostic properties of USRPs for the multimodal detection of lung tumors and improved radiotherapy after nebulization.     

Mechanism of Crystallization and Implications for Charge Transport in Poly(3‐ethylhexylthiophene) Thin Films

In this work, crystallization kinetics and aggregate growth of poly(3‐ethylhexylthiophene) (P3EHT) thin films are studied as a function of film thickness. X‐ray diffraction and optical absorption show that individual aggregates and crystallites grow anisotropically and mostly along only two packing directions: the alkyl stacking and the polymer chain backbone direction. Further, it is also determined that crystallization kinetics is limited by the reorganization of polymer chains and depends strongly on the film thickness and average molecular weight. Time‐dependent, field‐effect hole mobilities in thin films reveal a percolation threshold for both low and high molecular weight P3EHT. Structural analysis reveals that charge percolation requires bridged aggregates separated by a distance of ≈2–3 nm, which is on the order of the polymer persistence length. These results thus highlight the importance of tie molecules and inter‐aggregate distance in supporting charge percolation in semiconducting polymer thin films. The study as a whole also demonstrates that P3EHT is an ideal model system for polythiophenes and should prove to be useful for future investigations into crystallization kinetics.     

Adaptation of spherical and cylindrical vessels to variable internal pressure and temperature

The kinematic theorem is applied to solve some problems of shakedown of spherical and cylindrical vessels subjected to variable internal pressure and temperature, taking into account the temperature dependence of the yield stress.     

Simulation of austenitic microstructure in rod and wire rolling of quenched and tempered steel grades

The determination of the microstructural and forming parameters of rods and wire from low to medium-alloy quenched and tempered as well as spring steel grades is a prerequisite for the mathematical modelling and optimization of the technology on the basis of process and material criteria. Using the boundary, heat balance and finite difference methods as well as visioplastic investigations, the most important forming parameters were determined in high-speed rolling. The rolling of such steel grades allowed to determine the material constants for the dynamic and static equations of recrystallization. Due to the inhibitive effect of the alloying elements (Mo, V) the investigated steel grades display a comparatively pronounced recrystallization inertia. Accordingly, the austenitic post-recrystallization grain size is very fine and relatively independent of the temperature. Temperature control during rod and wire rolling allows to influence and adjust the austenitic microstructure prior to phase transformation.