ZnSe棱镜折叠波导CO_2激光器的研究

研制了使用ZnSe棱镜折叠的波导CO_2激光器,提出一种CO_2激光—He-Ne激光调整光路的方法,并获得了该种折叠激光器的振荡。进一步的改进可以提高其输出功率而得到实用性的器件。     

基于S5933的PCI总线与8051的接口设计

简要介绍了PCI总线的特点，重点介绍了AMCC公司推出的S593X系列的高性能接口控制器，并通过实践给出基于S5933的PCI总线和8051的接口设计技术。     

以杂多酸为催化剂合成乙二醇-乙醚的研究

研究了杂多酸催化无水乙醇和环氧乙烷(EO)制备乙醇乙醚的醚化反应,考察了不同种类的杂多酸以及醚化反应工艺条件对反应活性和选择性的影响.结果表明,PW_(12)催化剂的反应活性高、反应温度低、选择性好,当用PW_(12)作催化剂,乙醇与环氧化乙烷之比为3.0(mol),反应温度45℃,反应时间1h时,转化率和选择性均超过97%.     

Preparation of Ultra—fine Aluminum Nitride in Thermal Plasma

Ultra-fine aluminum nitride has been synthesized by the evaporation of aluminum powder at atmospheric-pressure nitrogen plasma in a hot-wall reactor.The average size of aluminum nitride particle is 0.11μm measured by scanning electric mirror(SEM),and the purity is at least over90% evaluated by X-Ray diffraction(XRD).The conversion of Al powder to aluminum nitride is strongly depended on the injection of NH3.Typical experimental parameters such as the feed rate of raw material,the flow rate of ammonia and the position of injecting aluminum powder into the reactor are given.     

管理系统设计中的人体工程设计思想

目前人体工程学的应用领域主要集中于机器或生产环境等“硬”系统的研究与设计，其设计的思想、内容与程序对具有“软”系统特征的管理系统设计具有深远影响。文章对管理系统设计中的人体工程设计思想进行了讨论。     

退火损伤对Er注入GaAs和Yb注入InP发光的影响

本文报道了CaAs∶Er、InP∶Yb发光样品的二次离子质谱、X-射线双晶衍射测量结果及其与Er离子的表面成份的关系.分析讨论了退火损伤对GaAs∶Er和InP∶Yb发光的影响以及Er~(3+)复合体发光中心模型.     

N—ISDN走出低谷B—ISDN迈向市场

本文介绍了全球Ｎ－ＩＳＤＮ的商用情况和Ｂ－ＩＳＤＮ的发展趋势，展示出Ｎ－ＩＳＤＮ走了低谷、Ｂ－ＩＳＤＮ迈向市场的美好前景。     

建立数据库用微机进行钻井液设计

为了更好地指导现场钻井液施工,利用微机建立有关数据库和相应的设计软件,根据地质、工程的要求和井下情况进行钻井液设计,其特点是资料全面、程序运行可靠且操作简便,设计符合现场情况,施工顺利。在千12区块,用微机设计的109口井与人工设计的75口井相比,钻井速度提高,井下复杂情况减少,提高了经济效益。     

THE FLOW PRODUCED IN PARTICLE-SUSPENSION BY AN INFINITE ROTATING DISK:SERIES SOLUTION

To the flow produced in particle-suspension by a rotating disk of infinite extent,the asymptotic behavior at infinity is analyzed.A corresponding series solution is presented.It isshown that this approach yields widely valid solutions of high accuracy for all the cases in whichthat suction or weak injection at the disk surface exists.For the cases that strong injection or par-ticle-free band exists,the series method fails.     

TURBULENCE MEASUREMENT INSTRUMENT WITH A SILICON PIEZORE-SISTANCE BEAM

A newly developed turbulence measurement instrument is introduced in the paper.The transducer of the device is based on the principle of the effect of silicon piezoresistance that isintegrated in a Wheatstone bridge on a pure silicon beam. At one end of the beam, a small lightball is installed as the target forced by the water flow. The other parts are prevented from thewater flow with a sophisticated stainless steel tube. The instrument can be used to measure turbu-lent velocities either in clear Water or in flows bearing hyperconcentration of sediment. It can al-so be used to measure velocities in both glass flume and model experiments as well as in pipe ex-periment by being mounted in a special way.