Novel B-ring modified combretastatin analogues: syntheses and antineoplastic activity

A series of B-ring modified combretastatin analogues were synthesized and their inhibitory activity against microtubule assembly, cytotoxic activity against Colon 26 adenocarcinoma cancer cell line were evaluated. Among these, pyridone derivative (19) showed strong antimitotic activity and cytotoxicity, along with excellent water-solubility.     

Screening of Inhibitors Targeting Heat Shock Protein 47 Involved in the Development of Idiopathic Pulmonary Fibrosis

Heat shock protein 47 (HSP47), a collagen-specific molecular chaperone, is causally related to fibrotic diseases, including idiopathic pulmonary fibrosis. The identification of Compounds that interfere with the HSP47-collagen interaction is essential for the development of relevant therapeutics. Herein, we prepared human HSP47 as a soluble fusion protein expressed in E. coli and established an assay system for HSP47 inhibitor screening. We screened a natural and synthetic Compound library established at Nagasaki University. Among 1023 Compounds, 13 exhibited inhibitory activity against human HSP47, of which three inhibited its function in a dose-dependent manner. Epigallocatechin-3-O-gallate, one of these three Compounds, is a typical polyphenol Compound derived from tea leaves. Structurally related Compounds were synthesized and examined for their activity, revealing a hydroxyl group at A-ring position 5 as important for its activity. The present findings provide valuable insight for the development of natural product-derived therapeutics for fibrotic diseases, including idiopathic pulmonary fibrosis.     

Characterization of blasted austenitic stainless steel and its corrosion resistance

It is known that the corrosion resistance of stainless steel is deteriorated by blasting, but the reason for this deterioration is not clear. A blasted austenitic stainless steel plate (JIS-SUS304) has been characterized with comparison to the scraped and non-blasted specimens. The surface roughness of the blasted specimen is larger than that of materials finished with #180 paper. A martensite phase is formed in the surface layer of both blasted and scraped specimens. Compressive residual stress is generated in the blasted specimen and the maximum residual stress is formed at 50–100 μm from the surface. The corrosion potentials of the blasted specimen and subsequently solution treated specimen are lower than that of the non-blasted specimen. The passivation current densities of the blasted specimens are higher those of the non-blasted specimen. The blasted specimen and the subsequently solution treated specimen exhibit rust in 5% sodium chloride (NaCl) solution, while the non-blasted specimen and ground specimen do not rust in the solution. It is concluded that the deterioration of corrosion resistance of austenitic stainless steel through blasting is caused by the roughed morphology of the surface.     

Kinetics of hydrogen absorption and desorption of magnesium nickel alloy

Reaction rates in the Mg₂Ni---H₂ system are still unclear, although they are needed for the process/optimization of hydrogen storage reactors. In this article, the rates of hydrogen absorption and desorption of the magnesium nickel alloy were investigated at different pressures up to 2.0 MPa using a constant-temperature thermogravimetric method. The powder of the alloy was microencapsulated with copper to improve the alloy properties (such as cycling strength) as a pretreatment. In the experiments, weight changes of the smallest amount possible of samples were monitored with the help of an ultra-accurate thermobalance, in order to avoid changes of the sample temperature due to the heat of the reaction. The reaction curves obtained revealed unique dependence of temperature and pressure and influence of thermal hysterisis. It is also possible that hydrogen-absorption and-desorption rates of this hydrogen storage alloy are expressed by the rate equation of first-order reversible reaction.     

Synthesis and properties of bismaleimide resins containing ether bonds

New bismaleimides containing ether bonds were prepared. The thermal properties of the bismaleimides were investigated by differential scanning calorimetry (DSC). The effects of structure of the bismaleimides and curing conditions on the thermal and mechanical properties of the cured resins such as initial decomposition temperature (T_d), glass transition temperature (T_g), and flexural strength were studied. The introduction of ether bonds to bismaleimide resins decreased the brittleness of the resins without reductions in their heat-resistant properties.     

Functional metal-porphyrazine derivatives and their polymers, 10. Secondary fuel cells based on oxygen reduction on platinum electrode modified by polymers and metal-phthalocyanines

Secondary fuel cells based on oxygen reduction of platinum electrode modified by polymers and metal-phthalocyanine (Mt = Fe(III), Co(II), Ni(II), and Cu(II)) were studied. The discharge curves for the platinum electrode modified by poly(2-vinylpyridine) (or polystyrene) and Co-phthalocyanine in 30% KOH aqueous solution, for a 30 min charge at 500 μA, followed by a 100 μA discharge showed a stable plateau at about ?0.24 V SCE (Saturated Calomel Electrode). The open circuit voltage (vs. Zn) of the cell was 1.2 V, and the discharge capacity was of 46 A · h/kg. For this battery there was no significant decay in its characteristics after more than 30 charge-discharge cycles. In Mt-phthalocyanines, the values decreased in the order of Co(II) > Fe(III) > > Cu(II) > Ni(II). From a cyclic voltammogram for the electrode modified by the polymer and Co-Pc, the cathodic reactions were discussed.     

Lysozyme requires fluctuation of the active site for the manifestation of activity

Mutations around His15 which lie far away from the active site,stimulated glycol chitin activity of lysozyme at physiologicaltemperature. Del-Argl4Hisl5 lysozyme, a mutant lysozyme whoseArgl4 and Hisl5 were deleted together, and has the highest activityamong these mutant lysozymes, had a similar binding abilityto a trimer of N-acetyl-glucosamine, a substrate analogue, relativeto native lysozyme. This suggests that the increased activitywas due to an increased k_cat in the catalysis reaction. TheH-D exchange rate of the N-1 proton in the Trp63 which is locatedin the active site cleft, was enhanced in the Del-Argl4Hisl5lysozyme, while 2-D proton NMR analysis revealed no conformationalchange around Trp63. We conclude that some sort of fluctuationat the active site might be required for the manifestation ofactivity. This theory is supported by the finding that the Del-Argl4Hisl5lysozyme showed a shift in temperature dependency of activityto lower temperatures compared with that of native lysozyme.     

High oleic acid oil suppresses lung tumorigenesis in mice through the modulation of extracellular signal-regulated kinase cascade

This study was undertaken to estimate the effect of dietary high oleic acid oil (OA) on 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK)-induced lung tumorigenesis in mice. Diet containing 10% oil was fed to mice through experimental periods. On day 30 after NNK injection (100 mg/kg body weight, i.p.), the treatment increased the level of prostaglandin E₂ (PGE₂) as well as proliferating cell nuclear antigen, a marker of cell proliferation in a high linoleic acid oil (LA)-fed group but not in an OA-fed group. The NNK treatment also induced the activation of an extracellular signal-regulated kinase (Erk) cascade (Erk, Mek and Raf-1) in an LA-fed group. On the other hand, OA feeding abolished the NNK-induced activation of the Erk cascade. In conjugation with these events, OA feeding reduced lung tumor incidence and tumor multiplicity (percentage of mice with tumors) in mice compared with LA feeding at the 20th experimental week. These results suggest that OA suppresses lung tumorigenesis and that this suppression is correlated with the inhibition of PGE₂ production and inactivation of the Erk cascade.     

Relation between crystal structure and lattice oxygen content of sintered reaction-bonded silicon nitride

When reaction-bonded silicon nitride containing MgO/Y₂O₃ additives is sintered at three different temperatures to form sintered reaction-bonded silicon nitride (SRBSN), the thermal conductivity increases with sintering temperature. The β-Si₃N₄ (silicon nitride) crystals of SRBSN ceramics were synthesized and characterized to investigate the relation between the crystal structure and the lattice oxygen content. The hot-gas extraction measurement result and the crystal structure obtained using Rietveld analysis suggested that the unit cell size of the β-Si₃N₄ crystal increases with the decrease in the lattice oxygen content. This result is reasonable considering that the lattice oxygen with the smaller covalent radius substitutes nitrogen with the larger one in the β-Si₃N₄ crystals. The lattice oxygen content decreased with increasing sintering temperature which also correlated with increase in thermal conductivity. Moreover, it is noteworthy from the viewpoint that it may be possible to apply the lattice constant analysis for the nondestructive and simple measurement of the lattice oxygen content that deteriorates the thermal conductivity of the β-Si₃N₄ ceramics.     

Materials for global carbon dioxide recycling

CO₂ emissions, which induce global warming, increase with the development of economic activity. It is impossible to decrease the CO₂ emissions by suppression of the economic activity. Global CO₂ recycling can solve this problem. The global CO₂ recycling consists of three district: The electricity is generated by solar cells on deserts. At desert coasts, the electricity is used for H₂ production by seawater electrolysis and H₂ is used for CH₄ production by the reaction with CO₂. CH₄ which is the main component of liquefied natural gas is liquefied and transported to energy consuming districts where CO₂ is recovered, liquefied and transported to the desert coasts. A CO₂ recycling plant for substantiation of our idea has been built on the roof of the Institute for Materials Research in 1996. Key materials necessary for the global CO₂ recycling are the anode and cathode for seawater electrolysis and the catalyst for CO₂ conversion. All of them have been tailored by us. They have very high activity and selectivity for necessary reactions in addition to excellent durability. A pilot plant consisting of minimum units in an industrial scale is going to be built in three years.