Ultrasonic irradiation on hydrolysis of magnesium hydride to enhance hydrogen generation

This paper describes the ultrasonic irradiation on the hydrolysis of magnesium hydride to enhance hydrogen generation; the effects of the ultrasonic frequency and the sample size on the hydrogen generation were mainly examined. In the experiments, three MgH₂ particle and nanofiber samples were soaked in distilled water and ultrasonically irradiated at frequencies of 28, 45, and 100 kHz. Then, the amount of hydrogen generated was measured. We found that the low frequency of ultrasonic irradiation and the relatively small sample size accelerated the hydrolysis reaction MgH₂ + 2H₂O = Mg(OH)₂ + 2H₂ + 277 kJ. In particular, the MgH₂ nanofibers exhibited the maximum hydrogen storage capacity of 14.4 mass% at room temperature at a frequency of 28 kHz (ultrasound irradiation). The results also experimentally validated that a combination of ultrasonic irradiation and MgH₂ hydrolysis is considerably effective for efficiently generating hydrogen without heating and adding any agent.     

EVALUATION OF THE CUMULATIVE FORMATION OF HIGH-SPEED LIQUID JETS

1 .　INTRODUCTIONHigh speedliquidjetsareoftenseeninrainerosionsimulationofaircraftandmissiles ,JilbertandField[1] and jetcuttingofmaterials ,Kob ayashi[2 ] .Inthegenerationofjets ,itistechnicallyinterestingtoknowhowtooperatetheexperimen talfacilityattheoptimumconditiontoobtainthejetvelocitymostefficiently .ThisisdescribedbyShiandTakayama[3] ,ShiandItoh[4 ] ,ShiandIt oh[5] .Intheearlieststudyofa pulsedhigh speedliquidjet ,BowdenandBrunton[6 ] puttheliquidinanozzleandthenusedaslugimpact…     

Heat and Moisture Transfer and Hygrophysical Changes in Elastoplastic Hollow Cylinder-food During Drying

There are many dried foods of hollow cylinder-shapes in the market. Hygrostress cracks form in these foods during drying without a careful process control. The objective of the present work was to develop a simulation method for heat and moisture transfer in hollow cylinder-food coupled with hygrophysical changes. A modified Luikov's model was used for the development together with a virtual work minimization principle, critical tensile stress criterion for crack formation, and critical crack-tip-opening angle criterion for crack propagation. The developed, computerized simulation model was validated through drying experiments of samples made from a starch hydrate.     

Decision-making in electrical appliance use in the home

This paper presents the results of a survey as well as an argument from the viewpoint of behavioral economics with the aim of clarifying how consumers make decisions about electrical appliance use in the home. A survey of consumers showed that most have little awareness of the energy efficiency of appliances, the price of the services produced by electrical appliances, or electricity rates. These findings indicate that price does not function as a signal in electricity consumption through electrical appliance use. Rather, we found that consumer decision-making in electricity consumption is dependent on the characteristics of the particular electrical appliances they use. Additionally, we argue that the payment system for home electricity consumption plays an important role in decision-making, causing biases due to aspects of human psychology discussed here in terms of satisficing and heuristics, payment decoupling, and budgeting. We conclude that decision-making about electrical appliance use and electricity consumption in the home is not always rational and is affected both by the particular characteristics of appliances and the payment system for electricity consumption along with human psychology.     

Ferroelectric properties of ultrathin films of Nylon 11

Ferroelectric properties of ultrathin films of Nylon 11 were investigated. The thickness was in the range of 25 to 55 nm. Ferroelectric response was largely affected by thermal annealing and following cooling conditions. Thermal annealing at higher temperature followed by quenching in liquid nitrogen gave larger remanent polarization and smoother surface, whereas cooling down in an ambient atmosphere caused smaller remanent polarization and rough surface. Surface roughness strongly affected the polarization reversal and remanent polarization. Hydrogen bonding in crystal was also significantly related to the polarization reversal and thus remanent polarization.     

Development of numerical scheme for phase field crystal deformation simulation

The phase field crystal (PFC) method is anticipated as a new multiscale method, because this method can reproduce physical phenomena depending on atomic structures in metallic materials on the diffusion time scale. Although the PFC method has been applied to some phenomena, there are few studies related to evaluations of mechanical behaviors of materials by appropriate PFC simulation. In a previous work using the PFC method, tensile deformation simulations have been performed under conditions where the volume increases during plastic deformation. In this study, we developed a new numerical technique for PFC deformation simulation that can maintain a constant volume during plastic deformation. To confirm that the PFC model with the proposed technique can reproduce appropriate elastic and plastic deformations, we performed a series of deformation simulations in one and two-dimensions. In one- and two-dimensional single-crystal simulations, linear elastic responses were confirmed in a wide strain rate range. In bicrystal simulations, we could observe typical plastic deformations due to the generation, annihilation and movement of dislocations, and the interaction between the grain boundary and dislocations. Moreover, the deformation behaviors of a nanopolycrystalline structure at high temperature were simulated and the intergranular deformations caused by grain rotation and grain boundary migration were reproduced.     

Group feature extraction based on matrix factorization from long-range office-logging data

To increase the productivity of knowledge workers, it is necessary to manage their organization so that they are motivated to collaborate with each other for their synergy. However, it is difficult for managers to grasp the explicit interactions of workers in the organization all the time. Owing to advanced communications technology, and the reduced size and improved capabilities of computers, we are able to record group behaviors as logging data in the office. The aim of this study is to extract features of group behavior from long-range office-logging data. We apply principal component analysis to the data matrix whose element is the mean travel velocity calculated from an individual’s trajectory per day. The results demonstrate the feasibility of our approach, since nontrivial informative group features can be extracted.     

Phylogenetic analysis of Rhodococcus erythropolis based on the variation of ribosomal proteins as observed by matrix-assisted laser desorption ionization-mass spectrometry without using genome information

Rhodococcus erythropolis strains characterized as antibiotic producers can be classified into three groups according to their antibiotic spectrum and growth compatibility. Due to their high genotypic similarity, the taxonomic relationship of these strains has not been elucidated. In this study, ribosomal protein profiling using matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS) was employed to classify twenty-one strains of R. erythropolis (15 antibiotic producers and 6 non-antibiotic producers). In the first step in this method, a total of 30 intense peaks observed for purified ribosomal subunit proteins of the type strain (R. erythropolis JCM 3201^T) were selected as the reference peaks. The mass spectra observed for the cell lysates of each sample strain were then checked as to whether peaks were observed at the same masses of the reference peaks. The results of peak matching were processed by cluster analysis, generating a dendrogram. Four major clusters of the R. erythropolis strains corresponded to three antibiotic groups and the non-antibiotic group. Furthermore, the topology of the dendrogram was highly comparable with the phylogenetic tree based on DNA gyrase subunit B gene (gyrB) sequencing. These results indicate that our proposed ribosomal protein profiling method using MALDI-MS is a potentially reliable and sufficiently high-throughput technique for the taxonomic analysis of closely related bacterial strains without using DNA sequence information.     

Numerical analysis of characteristics of microactuators driven by liquid crystals

For the purpose of developing liquid crystalline microactuators, the transient behaviors of a nematic liquid crystal between two parallel plates have been computed for various parameters such as applied voltage, the gap between the plates, and the twist and tilt angles at the plates. The Leslie-Ericksen theory has been selected as a constitutive equation. The twist angle has an effect on the induced velocity profiles; for example, the induced flow is planar at the twist angle of 0°, while the flow has an out-of-plane component when the twist angle is not 0°. Transient behaviors of shear stress acting on the plates, the flowrate, and the maximum values of the velocity, and the tilt angle between the plates have been reported. In addition, we have investigated the effects of the applied voltage, the gap between the plates, and the tilt angle at the plates on the above-mentioned values. We can develop microactuators with arbitrary characteristics by suitably controlling the applied voltage, the size of the actuators, and the director anchoring conditions.