Polymerization of organic compounds in an electrodeless glow discharge. XI. Pressure in glow discharge

The pressure of a steady-state flow of monomer, p₀, changes to a new steady-state flow pressure, p_g, in glow discharge. The value of p_g is dependent on the flow rate of monomer, the pumping-out rate of the vacuum system for the product gas (which is hydrogen in many cases of plasma polymerization of hydrocarbons), and the characteristic hydrogen yield of a monomer associated with plasma polymerization. The relationships between these factors were established and examined for plasma polymerizations of acetylene, ethylene, and acrylonitrile.     

Characterization of the chemical conversion films that form on Mg−Al alloy in colloidal silica solution

Chemical conversion treatment of Mg−Al alloy (AZ91) using colloidal silica as an alternative to chromate conversion was investigated as a function of solution pH, temperature, solution conditions, and treatment time. The solution used for the colloidal silica coating consisted of colloidal silica, titanium sulfate, and cobalt ions to maintain good anti-corrosion and adhesion properties. Adding CoSO₄ to the colloidal silica solution enhanced the adhesion force between the silica film and magnesium substrate. The optimum conditions for the chemical conversion treatment solution were pH 2, 90-sec treatment, and 25°C.     

Calcium oxide/carbon dioxide reactivity in a packed bed reactor of a chemical heat pump for high-temperature gas reactors

The thermal performance of a chemical heat pump that uses a calcium oxide/carbon dioxide reaction system was discussed as a heat storage system for utilizing heat output from high temperature gas reactors (HTGR). Calcium oxide/carbon dioxide reactivity for the heat pump was measured using a packed bed reactor containing 1.0 kg of reactant. The reactor was capable of storing heat at 900 °C by decarbonation of calcium carbonate and generating up to 997 °C by carbonation of calcium oxide. The amount of stored heat in the reactor was 800–900 kJ kg⁻¹. The output temperature of the reactor could be controlled by regulating the carbonation pressure. The thermal storage performance of the reactor was superior to that of conventional sensible heat storage systems. A heat pump using this CaO/CO₂ reactor is expected to contribute to thermal load leveling and to realize highly efficient utilization of HTGR output due to the high heat storage density and high-quality temperature output of the heat pump.     

Lingual Epithelial Stem Cells and Organoid Culture of Them

As tongue cancer is one of the major malignant cancers in the world, understanding the mechanism of maintenance of lingual epithelial tissue, which is known to be the origin of tongue cancer, is unquestionably important. However, the actual stem cells that are responsible for the long-term maintenance of the lingual epithelium have not been identified. Moreover, a simple and convenient culture method for lingual epithelial stem cells has not yet been established. Recently, we have shown that Bmi1-positive cells, residing at the second or third layer of the epithelial cell layer at the base of the interpapillary pit (IPP), were slow-cycling and could supply keratinized epithelial cells for over one year, indicating that Bmi1-positive cells are long-term lingual epithelial stem cells. In addition, we have developed a novel lingual epithelium organoid culture system using a three-dimensional matrix and growth factors. Here, we discuss current progress in the identification of lingual stem cells and future applications of the lingual culture system for studying the regulatory mechanisms of the lingual epithelium and for regenerative medicine.     

Sterols ofKalanchoe pinnata: First report of the isolation of both C-24 epimers of 24-alkyl-Δ25-sterols from a higher plant

Eighteen sterols were isolated from the aerial parts ofKalanchoe pinnata (Crassulaceae) including four novel sterols,viz. (24R)-stigmasta-5,25-dien-3β-ol (24-epiclerosterol), (24R)-5α-stigmasta-7,25-dien-3β-ol, 5α-stigmast-24-en-3β-ol, and 25-methyl-5α-ergost-24(28)-en-3β-ol. 24-Epiclerosterol and its Δ⁷-analog occur together with their 24S/β-epimers in the same plant making this the first report of the isolation of both C-24 epimers of Δ²⁵-unsaturated 24-alkylsterols from a non-marine organism. Iodine-catalyzed isomerization of stigmasta-5,24-dien-3β-ol (24-ethyldesmosterol), the main sterol ofK. pinnata, yielded 24-epiclerosterol among other products.     

Investigation of partial discharge mechanism by simultaneous measurement of current waveform and light emission

We observed current pulse waveforms of partial discharge (PD) in SF₆ gas so as to investigate the PD mechanism. We also measured light intensity and light emission image of PD simultaneously under different conditions of applies voltage and SF₆ gas pressure. From these experiments, we found that the “double-peak current waveform” appeared at high pressure and high voltage conditions. We also analyzed the mutual correlation of waveforms between a single current and the light emission. Moreover, we obtained experimental evidence of filmentlike light image appearing at the PD tip under the same condition with double-peak current waveform. From the electric field analysis around the needle electrode tip, we believe that the filamentlike light image expands beyond the critical electric field of SF₆ gas. Thus, we concluded that these current waveforms with double peaks showed evidence of leader-type PD, leading to breakdown. Finally, we could point out that leader-type PD should be distinguished and measured for the diagnosis of GIS insulation performance. © 1999 Scripta Technica, Electr Eng Jpn, 129(4): 58–65, 1999     

Effects of Winding Attachment Positions on Output Characteristics of Flux‐Modulating Synchronous Machines

The flux‐modulating synchronous machine (FMSM) is a new type of multipole SM with nonoverlapping concentrated armature and field windings on the stator. This paper compares the output characteristics of two FMSMs through finite element analysis (FEA) and experiments. In both of the FMSMs, the attachment positions of the armature and field windings are swapped. To determine the reason for the discrepancies in their output characteristics, unsaturated inductances were calculated using a d‐‐q equivalent circuit. In addition, the calculated results of the inductances were confirmed through a visualization of the leakage fluxes using FEA. The results of the study show that the synchronous inductance can be reduced by attaching the armature winding to the air‐gap side of the stator teeth and that the reduction leads to an increase in output power.     

Humidity Sensor Characteristics of Woodceramics

The humidity sensor characteristics of Woodceramics were investigated. The Woodceramics used in this experiment were prepared at 650–900°C. The size of specimens selected was 1 × 1 × 10 mm . One was used as-cut and the other was polished. Above 700°C, the resistance of the specimen was below 50 and the decrease of resistance with increasing relative humidity was small. The specimen prepared at 650°C had a resistance of about 1 k. The resistance of as-cut specimens decreased with increase in relative humidity, but that of the polished specimen did not change significantly. The difference between as-cut and polished samples was explained by the differences in surface micro-structure.