Temporal changes in vertical distribution of 137Cs in litter and soils in mixed deciduous forests in Fukushima,Japan

Downward migration of ¹³⁷Cs in soils was studied in three mixed deciduous forests c.a. 40 km northwest of the Fukushima Daiichi Nuclear power plant (FDNPP), Japan. We selected three different types of forest regarding to environmental condition such as slope inclinations and snow coverage conditions at the time of deposition. We examined temporal changes in the vertical distribution of ¹³⁷Cs from litter layers to 10 cm soil depth for two years (2.3 to 4.3 years after the FDNPP accident in 2011). At all three study sites, the ¹³⁷Cs in the litter layer had largely migrated to surface soil by 2013. After 2014, about 80% of the ¹³⁷Cs in forest soils (litter layer to 10 cm soil depth) remained within 0–5 cm soil layer. The vertical distribution had not changed substantially since 2014, suggesting that changes to the downward migration rates of ¹³⁷Cs in soils drastically decreased with time. In addition, small amounts of migrating ¹³⁷Cs could not be detected by the present method because there was a large spatial variation in the distribution of soil ¹³⁷Cs. The results showed similar patterns of soil ¹³⁷Cs distribution among the three study sites although there were differences in the environmental conditions.     

Characterization of a Silk‐Resinified Compact Fabricated Using a Pulse‐Energizing Sintering Device

Pulse electric current sintering is used to prepare a compact from resinificated hydrous silk powder. Compacts with no remnant silk powders are formed with 20 wt% added water, 20–40 MPa molding pressure, and >353 K molding temperature. The latter two are much lower than those used for conventional hot pressing. No dependence on molding pressure and temperature are found in XRD or FT‐IR analysis, except for a compact molded at 473 K, for which silk fibroin decomposition is confirmed by DSC, EGA‐MS, and molecular weight measurements. The compact's three‐point bending strength depends on the molding temperature, except for the temperature at which silk fibroin decomposes. The maximum three‐point bending strength resembles that of general‐purpose epoxy resin and is much higher than that of PLA.

     

A phenolic antioxidant from the Pacific oyster (Crassostrea gigas) inhibits oxidation of cultured human hepatocytes mediated by diphenyl-1-pyrenylphosphine

3,5-Dihydroxy-4-methoxybenzyl alcohol (DHMBA), an antioxidant isolated from the Pacific oyster (Crassostrea gigas), was studied in a cell-based fluorometric antioxidant assay using human hepatocyte-derived cells (C3A) and diphenyl-1-pyrenylphosphine (DPPP) as a fluorescent probe. In comparison with two hydrophilic antioxidants, DHMBA showed the stronger inhibition of DPPP-mediated fluorescence than chlorogenic acid and l-ascorbic acid: at a concentration of 320 μM of DPPP, the inhibition was 26.4 ± 2.6%, 11.1 ± 1.2%, and 0 ± 2.0% for DHMBA, chlorogenic acid, and l-ascorbic acid, respectively (mean ± SD, n = 4). Their relative oxygen radical absorbance capacities (ORAC) were dissociated with their cell-based antioxidant activities: 1.47 ± 0.40, 4.57 ± 0.30, and 0.53 ± 0.13 μmol TE/μmol for DHMBA, chlorogenic acid, and l-ascorbic acid, respectively (mean ± SD, n = 4). The amphiphilicity of DHMBA was better than chlorogenic acid and l-ascorbic acid might underlie this dissociation. Since the C3A cells are human hepatoma-derived cells, DHMBA might be useful in the prevention and treatment of liver diseases by involving an oxidation process.     

Porous ceramics mimicking nature—preparation and properties of microstructures with unidirectionally oriented pores

Porous ceramics with unidirectionally oriented pores have been prepared by various methods such as anodic oxidation, templating using wood, unidirectional solidification, extrusion, etc. The templating method directly replicates the porous microstructure of wood to prepare porous ceramics, whereas the extrusion method mimics the microstructures of tracheids and xylems in trees. These two methods are therefore the main focus of this review as they provide good examples of the preparation of functional porous ceramics with properties replicating nature. The well-oriented cylindrical through-hole pores prepared by the extrusion method using fibers as the pore formers provide excellent permeability together with high mechanical strength. Examples of applications of these porous ceramics are given, including their excellent capillary lift of over 1 m height which could be used to counteract urban heat island phenomena, and other interesting properties arising from anisotropic unidirectional porous structures.     

Rate of droplet deposition in steam-water annular flow and effect of a flow obstacle

Deposition rate of droplets in steam-water annular two-phase flow was measured using a 5 mm diameter vertical round tube as a test section. In the experimental conditions tested in this work, the droplet mass transfer coefficient decreased with an increase in the droplet concentration in the gas core flow and with an increase in the length of a deposition section. The dependence on these two parameters agreed fairly well with predictions by available correlations. Placing a small cylindrical tube concentrically in the test section round tube, the effect of a flow obstacle on the deposition rate of droplets was also experimentally investigated. It was found that the obstacle effect was significant and the deposition rate of droplets increased approximately three times in average. The obstacle effect measured in this work was compared with an empirical correlation and a simple mechanistic model that were developed using experimental results of air-water annular flows. Fairly good agreement was achieved in both cases, which would indicate that the mechanism of deposition enhancement induced by the flow obstacle is similar between air-water and steam-water flows.     

Analysis of pesticides including chlorine in welsh onions and mushrooms using gas chromatograph with an atomic emission detector (GC-AED)

An analytical method for the determination of 32 kinds of pesticide residues in onions, Welsh onions and mushrooms using gas chromatograph with an atomic emission detector (GC-AED) was developed. The pesticides were extracted with acetone-n-hexane (2:3) mixture. The crude extract was partitioned between 5% sodium chloride and ethyl acetate-n-hexane (1:4) mixture. The extract was passed through a Florisil mini-column for cleanup with 10 mL of acetone-n-hexane (1:9) mixture. Although the sensitivity of GC-AED was inferior to that of GC-ECD, GC-AED has a superior element-selectivity. Therefore pesticide residues in foods could be analyzed more exactly by using GC-AED. Thirty-two pesticides including chlorine in onion, Welsh onion and shiitake mushroom were detected without interference. Recoveries of these pesticides from samples determined by GC-AED were 64-114%, except for a few pesticides.     

Dextran from Leuconostoc mesenteroides augments immunostimulatory effects by the introduction of phosphate groups

The immunological effects of phosphorylated dextran (in which phosphate groups were chemically introduced) on murine splenocytes were examined. When dextran produced by Leuconostoc mesenteroides was phosphorylated by a reaction with polyphosphoric acid in formamide solution for 48 h, the degree of phosphorylation of dextran was maximal. The highest phosphorus content (1.7%, wt/wt) was observed in 40 kDa of dextran. The mitogenic response of murine splenocytes was enhanced by the phosphorylated dextran, but its activity was not related to its molecular weight. A strong response was detected at a concentration of 10 to 500 microg/ml, and the highest activity was obtained 48 h after stimulation. Phosphorylated dextran was characterized as a B-cell-specific mitogen. The expressions of CD86 on CD8alpha- CD11c- and CD8alpha- CD11c+ cells were augmented by phosphorylated dextran. The levels of mRNA expression of gamma interferon and interleukin-10 on murine splenocytes were also increased by the stimulation. These results demonstrate that dextran exerts immunostimulation by the introduction of phosphate groups.     

Analysis of imazalil and its major metabolite in citrus fruits by GC-FTD

A simplified simultaneous analytical method of imazalil (IZ) and its major metabolite, alpha-(2,4-dichlorophenyl)-1H-imidazole-1-ethanol (IZM), in citrus fruits was developed, and commodities samples were investigated. A homogenate of citrus fruits was extracted with ethyl acetate under basic conditions. The crude extract was partitioned between 0.025 mol/L of sulfuric acid and ethyl acetate. The analytes were extracted from the aqueous fraction under basic conditions with ethyl acetate. The extract solution was purified with an ENVI-Carb cartridge, and then analyzed by GC-FTD and GC/MS. Recoveries of IZ and IZM added to grapefruit at the level of 0.05 microgram/g were 90.0 and 108.7%, and those in the case of lemon were 100.4 and 93.0%, respectively. The detection limits were 0.01 microgram/g in samples. By this method, IZ and IZM were analyzed in 46 citrus fruits on the market and were detected simultaneously in some samples.     

SEM observation of wet biological specimens pretreated with room-temperature ionic liquid

A facile pretreatment process for SEM: The use of room temperature ionic liquids (RTILs) provides an interesting method for SEM of biological specimens. We used a novel and concise method of pretreatment, excluding fixation or Au sputtering steps. Fine and smooth-textured SEM images of a wide variety of biological specimens treated in this way were observed without artefacts.