Change in fine structure of nylon 6 gut yarn in twisting,annealing, and untwisting processes. I. Observation by WAXD,SAXD, and EM

To obtain information on the change in fine structure of nylon 6 taking place during practical false-twisting processes, the manner of change in the three elemental processes, i.e., twisting, annealing, and untwisting, was studied. For simplicity, nylon 6 gut yarn was used instead of multifilament yarn. Wide- and small-angle x-ray diffraction (WAXD and SAXD) together with electron microscopy (EM) were used here. The degree of molecular orientation in the crystalline region of the twisted yarn gradually decreases with increase of the twist number (TN) in the region of TN ? 100. The long spacing, determined by SAXD, of the twisted yarn increases with increases in TN. The increase in long spacing cannot be interpreted only by macroscopic strain or elongation of the yarn in the twisting process. This difference seems to arise from the contribution of the decrease of lateral size of lamellae to the average long spacing; therefore the increase in long spacing should be attributed to the elongation of the amorphous region, deduced from the crystallinity measured by WAXD and the long spacing diffraction. The angle between the streak line on the surface of twisted yarn observed by EM and the fiber axis agrees well with the twist angle of the yarn. The crystal lamellae are stacked normal to the streak line at the initial stage, i.e., at a low value of TN, but they begin to deviate from the normal direction with increase in TN, accompanied by their partial destruction. Based on SAXD and density measurements, the internal strain of yarn annealed after twisting is fully relaxed. When the yarn is untwisted after twisting and annealing, the crystal orientation recovers gradually to that of the untreated yarn. The chain axis within the lamellae in the center region of the yarn becomes nearly parallel to the fiber axis, but the chain axis in the outer region does not.     

Theoretical concentration of solar radiation by central receiver systems

Solar concentrations by central receiver systems have been calculated theoretically for various values of obliquity of the incident radiation, assuming that plane heliostat-mirrors, sufficiently small in dimension, cover a circular field without clearance. Through this calculation, the performance characteristics of this system such as the availability of the radiant energy incident on the heliostat-field, the distribution of interruption by an adjacent mirror, the optimum rim-angle for the mean area- and the mean volume-concentration and the attainable temperature were revealed. The study was extended towards the practical problem of decreasing the number of heliostats by increasing the dimensions of heliostat-mirrors, and the effect of increasing mirror-dimensions was argued for both plane and curved mirrors.     

Development of a tiny neutron probe with an optical fibre for BNCT

We have developed a tiny neutron probe detector as a monitor of a thermal neutron flux for boron neutron capture therapy. The detector consists of an optical fibre and a small neutron probe. We have used a film-like ZnS(Ag) scintillator and a 6LiF neutron converter for the neutron probe. In order to improve the gamma-neutron discrimination ability, vacuum evaporation of 6LiF onto the ZnS(Ag) film has been done. In order to improve the neutron detection efficiency, we made use of a wavelength-shifting fibre as the probe material. The characteristics of the above two types of fibre probe detector have been evaluated experimentally.     

Microdosimetry of neutron field for boron neutron capture therapy at Kyoto university reactor

Microdosimetric single event spectrum in a human body simulated by an acrylic phantom has been measured for the clinical BNCT field at the Kyoto University Reactor (KUR). The recoil particles resulting from the initial reaction and subsequent interactions, namely protons, electrons, alpha particles and carbon nuclei are identified in the microdosimetric spectrum. The relative contributions to the neutron dose from proton, alpha particles and carbon are estimated to be about 0.9, 0.07 and 0.3, respectively, four depths between 5 and 41 mm. We estimate that the dose averaged lineal energy, yD decreased with depth from 64 to 46 keV microm(-1). Relative biological effectiveness (RBE) of this neutron field using a response function for the microdosimetric spectrum was estimated to decrease from 3.6 to 2.9 with increasing depth.     

A Review of Broad-Band Fiber System Activity in Japan

In the future information society, various kinds of services will be required in offices, factories, homes, and communities. Fiber optic broad-band systems will play the most important role in the integrated services networks that will provide such services. This paper reviews field trials of fiber optic broad-band systems in Japan, focusing on subscriber loop system technology.     

SoI--gel modification of pH electrode glass membranes for sensing anions and metal ions

To obtain glass membrane electrodes selective for anions and metal ions, pH electrode glass membranes were modified by a sol-gel method using a quaternary ammonium salt and a bis(crown ether). A chloride ion-sensing glass membrane was designed, in which a pH electrode glass membrane was modified chemically by an alkoxysilyl quaternary ammonium chloride. X-ray photoelectron spectroscopy confirmed the chemical bonding of the quaternary ammonium moiety to the starting glass surface, which afforded the first example of glass-based "anion"-sensing membranes. A neutral carrier-type sodium ion-selective glass membrane was also fabricated which encapsulates a bis(12-crown-4) derivative in its sol-gel-derived surface. Both sol-gel-modified anion and metal ion-selective glass electrodes exhibited high sensitivity to their ion activity changes. The present sol-gel modification paves the way for designing glass-based ion sensors with tailor-made ion selectivities toward anions as well as cations.