Osteoinduction by Functionally Graded Apatites of Bovine Origin Loaded with Bone Morphogenetic Protein-2

Bioresorbable and functionally graded apatites (fg-HAp) ceramics, which are characterized by gradations in crystallinity and the grain size of hydroxyapatite (HAp:Ca₁₀(PO₄)₆(OH)₂), were designed using bovine bone by the calcination and partial dissolution–precipitation method. The fg-HAp ceramics had macropores of 100–600 μm originated from spongy bone, and micropores of 10–160 nm. Fg-HAp ceramics loaded with recombinant human bone morphogenetic protein-2 (rhBMP-2/fg-HAp) were implanted into the subcutaneous tissue of rats. Eight weeks after the implantation, the surface and bulk degradations of the fg-HAp-containing body fluid occured, and small pieces of fg-HAp were incorporated into the induced bone and fatty marrow, suggesting that osteoinduction occurred in conjunction with bone remodeling. The rhBMP-2/fg-HAp ceramics developed could become a resorbable biomimetic material with fast bioresorption and osteoinduction characteristics.     

Fabrication of Transparent, Sintered Sc2O3 Ceramics

We report here the fabrication of transparent Sc₂O₃ ceramics via vacuum sintering. The starting Sc₂O₃ powders are pyrolyzed from a basic sulfate precursor (Sc(OH)_2.6(SO₄)_0.2·H₂O) precipitated from scandium sulfate solution with hexamethylenetetramine as the precipitant. Thermal decomposition behavior of the precursor is studied via differential thermal analysis/thermogravimetry, Fourier transform infrared spectroscopy, X-ray diffractometry, and elemental analysis. Sinterability of the Sc₂O₃ powders is studied via dilatometry. Microstructure evolution of the ceramic during sintering is investigated via field emission scanning electron microscopy. The best calcination temperature for the precursor is 1100°C, at which the resultant Sc₂O₃ powder is ultrafine (∼85 nm), well dispersed, and almost free from residual sulfur contamination. With this reactive powder, transparent Sc₂O₃ ceramics having an average grain size of ∼9 μm and showing a visible wavelength transmittance of ∼60–62% (∼76% of that of Sc₂O₃ single crystal) have been fabricated via vacuum sintering at a relatively low temperature of 1700°C for 4 h.     

Radiation tolerance of type IIa synthetic diamond detector for 14 MeV neutrons

Radiation tolerance of a type IIa synthetic diamond detector was examined from irradiation of mono-energetic 14 MeV neutrons. Measurements of I–V (current–voltage) characteristics and energy spectrum for 5.486 MeV alpha particles were performed after neutron irradiation. In the I–V characteristics measurement, enhancement of rectification was observed after neutron irradiation of up to 2.0 × 10¹² n/cm². Concurrently with the enhancement of rectification, significant decrease in signal amplitude was observed in energy spectrum measurement for alpha particles. It is considered that these changes were due to increase in the concentration of defects acting as shallow energy levels in the forbidden band. For neutron irradiation of higher than 1.6 × 10¹³ n/cm², weakening of the rectification characteristics and recovery of the signal amplitude were observed. These changes imply that deep energy levels, which were also considered to be introduced by defects, were dominant and weakened the effects of the shallow energy levels. Increase in the concentration of the deep trapping levels resulted in gradual decrease of the signal amplitude and degradation in the energy resolution. The peak for the alpha particles was obtained up to 5.5 × 10¹³ n/cm².     

Comparison of activities in selective catalytic reduction of NOx by C3H8 over Co/MFI, Fe/MFI, and H/MFI zeolite catalysts

The Co/MFI(SiO₂/Al₂O₃ = 30) were prepared by a precipitation method with NaOCl in alkali solutions exhibited high activities to N₂ at 250 °C for the selective catalytic reduction (SCR) of NO_x. These catalysts showed two UV–vis bands at 700 and 400 nm, indicating the presence of octahedral Co(III) as well as tetrahedral Co(II). The high SCR activity over such Co(III, II)/MFI(30) seems to come from Co(III)---O moieties. The Co(II)MFI(30) catalysts prepared from Co(II)Cl₂ exhibited low SCR activities due to the presence of tetrahedral Co(II) ions in MFI. Less CO formation occurred over Co/MFI catalysts. The Fe/MFI(30) catalyst exhibited high activity due to the presence of some Fe---O species in MFI but more amount of CO were produced during SCR. H/MFI(30) catalyst exhibited a good SCR activity. However, more amount of carbonaceous deposits were produced on it. The correlation between acid concentration and SCR activity was discussed over H/MFIs.     

Oxidative Dehydrogenation of Propane with CO2 Over Cr/H[B]MFI Catalysts

Abstract  

Cr/silicalite-1 and Cr/H[B]MFI catalysts were prepared by the impregnation method, and Cr/H[B]MFI were further treated by steaming. The catalysts were employed for the oxidative dehydrogenation of propane to propylene with CO₂ as the oxidant. Cr/H[B]MFI showed significantly higher catalytic activity than Cr/silicalite-1, and steamed Cr/H[B]MFI was superior in the reaction stability to Cr/H[B]MFI. The nature of the supported chromium species have been characterized by a number of physicochemical techniques, such as Raman, UV–vis and NMR. It is concluded that the steaming led to the auto-reduction of some Cr⁶⁺ to Cr³⁺, and resultant Cr³⁺ species might be located near the boron center in the borosilicate framework to counterbalance the negative charge of the framework. The transformation of Cr⁶⁺ species to Cr³⁺ species, facilitated by the steaming process and the presence of boron in the catalyst, is responsible for the enhanced stability of oxidative dehydrogenation of propane to propylene with carbon dioxide as the oxidant.     

Voltammetric study of electrocatalysis for dioxygen reduction by trinuclear rutheniumammine complex confined in a polymer membrane

Electrocatalytic O₂ reduction was studied using a modified electrode coated with a Nafion membrane (Nf) dispersing a trinuclear ruthenium ammine complex ([(NH₃)₅Ru^IIIORu^IV(NH₃)₄ORu^III(NH₃)₅]Cl₆, Ru-red). When measuring cyclic voltammogram under O₂ atmosphere (at 0.5 mV s⁻¹), catalytic currents due to O₂ reduction were found to develop below −0.2 V (vs. Ag/AgCl). Since Ru-red undergoes irreversible decomposition into the mononuclear complexes via the reduced state (Ru^III-Ru^III-Ru^III) (∼−0.1 V), it is suggested that the electrocatalysis originates from the decomposed species (initial active species: Ru^II(NH₃)₅(OH₂) and Ru^II(NH₃)₄(OH₂)₂) rather than from the Ru-red. Although the present electrocatalyst was also applied to H₂O₂ reduction system, the catalytic activity was found to be poor from the voltammetric behavior. It appeared that the kinetics of the electrocatalysis is much faster in the O₂ reduction than in the H₂O₂ one. A selective and direct catalysis for O₂ reduction into H₂O was suggested from a ring-disk voltammogram to take place by an aggregate of the mononuclear ruthenium complexes in the polymer matrix. In addition, it was found that electrocatalytic O₂ reduction involves a slow kinetic process, so that factors affecting the overall kinetics were discussed in terms of the catalysis mechanism.     

Simulation of mechanical properties of epoxy-based chemically amplified resist by coarse-grained molecular dynamics

The mechanical properties of an epoxy-based chemically amplified resists with various cross-linking ratios were simulated using a newly developed coarse-grained molecular dynamics simulation that employs a bead–spring model. Models with the different cross-linking ratios were created in the molecular dynamics calculation step and uniaxial elongation simulations were performed. The results reveal that the simulated elastic modulus of the resist modeled by the Kremer–Grest model with an extended angle bending potential depends on the cross-linking ratio, its dependency exhibits good agreement with that determined by nanoindentation tests.     

Polymerization of styrene with a simple rare earth metal initiator

The catalytic activity in the polymerization of styrene has been examined using commercially available simple rare earth metal compounds such as Sm(OiPr)₃, Sm(acac)₃, Sm(OCOMe)₃, SmI₂(THF)₂ or SmCl₃ coupled with Et₃Al or methylaluminoxane (MAO). Among these compounds, the Sm(OiPr)₃/AlEt₃ system shows the highest catalytic activity, especially in the presence of a minor amount of toluene at 60 °C. The random copolymerization of styrene with methyl methacrylate suggests that the present polymerization proceeds with a radical polymerization mechanism. (C₅Me₅)SmCl₃Na(THF) and (C₅Me₅)SmCl₃Li(THF) systems exhibit relatively low catalytic activity, even in the presence of AlEt₃. © 2001 Society of Chemical Industry     

High thermal conductivity of spark plasma sintered silicon carbide ceramics with yttria and scandia

A fully dense SiC ceramic with a room‐temperature thermal conductivity of 262 W·(m·K)^?1 was obtained via spark plasma sintering β‐SiC powder containing 0.79 vol% Y₂O₃‐Sc₂O₃. High‐resolution transmission electron microscopy revealed two different SiC‐SiC boundaries, that is, amorphous and clean boundaries, in addition to a fully crystallized junction phase. A high thermal conductivity was attributed to a low lattice oxygen content and the presence of clean SiC‐SiC boundaries.     

<Emphasis Type="Italic">Brassica rapa</Emphasis> var. <Emphasis Type="Italic">japonica</Emphasis> Leaf Extract Mediated Green Synthesis of Crystalline Silver Nanoparticles and Evaluation of Their Stability,Cytotoxicity and Antibacterial Activity

Silver nanoparticles (AgNPs) were successfully synthesized from the reduction of Ag⁺ using AgNO₃ solution as a precursor and Brassica rapa var. japonica leaf extract as a reducing and capping agent. This study was aimed at synthesis of AgNPs, exhibiting less toxicity with high antibacterial activity. The characterization of AgNPs was carried out using UV–Vis spectrometry, energy dispersive X-ray spectrometry, fourier transform infrared spectrometry, field emission scanning electron microscopy, X-ray diffraction, atomic absorption spectrometry, and transmission electron microscopy analyses. The analyses data revealed the successful synthesis of nano-crystalline Ag possessing more stability than commercial AgNPs. The cytotoxicity of Brassica AgNPs was compared with commercial AgNPs using in vitro PC12 cell model. Commercial AgNPs reduced cell viability to 23% (control 97%) and increased lactate dehydrogenase activity at a concentration of 3 ppm, whereas, Brassica AgNPs did not show any effects on both of the cytotoxicity parameters up to a concentration level of 10 ppm in PC12 cells. Moreover, Brassica AgNPs exhibited antibacterial activity in terms of zone of inhibition against E. coli (11.1?±?0.5 mm) and Enterobacter sp. (15?±?0.5 mm) which was higher than some previously reported green-synthesised AgNPs. Thus, this finding can be a matter of interest for the production and safe use of green-AgNPs in consumer products.