A performance evaluation of disassembly systems with reverse blocking

For sustainable manufacturing, manufacturers should construct and design inverse manufacturing systems consisting of assembly and disassembly systems. The sorting process in the disassembly system is the first process of the whole inverse manufacturing system. Therefore, it can become a bottleneck and decrease the productivity of the whole inverse manufacturing systems.This study focuses on a disassembly system with reverse blocking in a sorting process [Yamada, T., & Matsui, M. (2003). Disassembly production systems and its design issues. Reprints of Japan Industrial Management Association, Spring meeting, Chofu, Japan, May, 144–145 (in Japanese)]. It generalizes the queuing model and discusses the performance of the disassembly system by mathematical and numerical analysis. First, the sorting process with reverse blocking is generally modeled as a queuing system. Next, the stationary state equations of the system are formulated, and the objective function is set as the throughput. Finally, the system performance is discussed by mathematical and numerical analysis in cases of a different number of stations and buffers, and also an example of the system design is shown and discussed in view of the busy rate, blocking probability and throughput.     

Development of probe-to-probe approach method for an independently controlled dual-probe scanning tunneling microscope

We developed a method of fast probe-to-probe approach for an independently controlled dual-probe scanning tunneling microscope (STM), which is essential to measure the transport property of nanostructures, without scanning electron microscopy (SEM). In the approach method, inchworm motors are used as the coarse positioning devices, which are controlled with a personal computer. The method enables an automatic approach of the probe to the other probe within a short time (typically 30 min). After the approach, a real distance between contact points of each probe tip to a sample can be measured from the overlapped part of the STM images obtained with individual probe. The approach method without SEM is also useful to measure the charge transport in the atmosphere, which will be essential for measurement of the bio molecules.     

Structural analysis of Ti-Fe thin films prepared by pulsed laser deposition

Titanium iron oxide (Ti-Fe-O) thin films have been successfully deposited by pulsed laser deposition (PLD). Experiments were carried out by using some targets. One was a Ti-50 at.% Fe-sintered target, while the others were Ti and Fe plates with various surface area ratio [S_R=S_Fe/(S_Fe+S_Ti)] from 30 to 70%. The thin films were analyzed by X-ray diffractometry, Rutherford backscattering spectroscopy (RBS) and transmission electron microscopy (TEM). From XRD analysis, the main phase in the thin films deposited at S_R=30 and 50% was β-Ti (Fe). By increasing S_R to 70%, the main phase of the thin film changed to TiFe. By phase diagram, composition of TiFe must be between Ti-47.5-50.3 at.% Fe at a temperature of 1085 °C. However, the composition of the thin film deposited at S_R=70% was found to be Ti_0.15Fe_0.62O_0.23. Thus, the composition of Fe in the thin film was much greater than the solubility limit. This fact suggests two possibilities. One is that the thin films, which we have deposited, were in a metastable state. The other is that metal oxides of amorphous state could be contained in the thin film.     

Possible Reaction Mechanism for the Formation of C60 From Naphthalene: A Semi-Empirical and Ab Initio Molecular Orbital Study

Abstract

Mechanism of C₆₀ formation from naphthalenes was studied by quantum chemical calculations. a patch up process of T-shape dimerization of naphthalenes followed by the intramolecular ring fusion, all through radical reactions, was proposed for a possible mechanism for the C₆₀ formation from naphthalenes. the reaction barrier was found to be less than 60-70 kcal/mol for each reaction step in this mechanism.     

Effect of Shear Rate Distribution on Particle Aggregation in a Stirred Vessel

The modeling of particle aggregation under a simple shear flow and the extension of the model to a stirred vessel is described. The model quantitatively demonstrates the change of the number of aggregates with time for each shear rate. This number increased with higher shear rate and, conversely, the aggregate size became small when raising the shear rate. This was because aggregates were broken by the stronger shear force. The number of aggregates for different impellers was determined. The shear rate was back‐calculated from the experimentally obtained aggregate size and the model equation. This shear rate was different from that estimated from the Metzner‐Otto method, consequently, some revisions of the Metzner‐Otto equation might be necessary for its application to particle aggregation.     

Evaluation of Young’s modulus of imprinted hydrogen silsesquioxane pillar after residual layer removal by reactive ion etching

Nanoimprint lithography has two basic steps. The first is the imprint step in which a mold with nanostructures on its surface is pressed into a resin film on a substrate, followed by removal of the mold. The second step is the residual layer removal by a reactive ion etching (RIE). There is no report whether the properties of the imprinted structure after RIE change or not. In this work, the authors evaluated the Young’s modulus of the imprinted pillar after residual layer removal by RIE. In this experiment, hydrogen silsesquioxane (HSQ), a type of spin-on-glass, was used as an imprint material. The residual layer was etched by RIE using CHF₃ gas. The Young’s modulus of imprinted pillar after RIE was measured via cantilever method. The Young’s modulus of HSQ pillar after RIE was twice as much as that of HSQ pillar before RIE. From the Fourier transform infrared measurement, it was founds the chemical structure of HSQ was changed by forming network structure due to heating by RIE plasma energy. These results indicate that the mechanical property of imprinted structure was changed in the residual layer removal step by using RIE.     

Light-Wavelength-Based Quantitative Control of Dihydrofolate Reductase Activity by Using a Photochromic Isostere of an Inhibitor

Photopharmacology has attracted research attention as a new tool for achieving optical control of biomolecules, following the methods of caged compounds and optogenetics. We have developed an efficient photopharmacological inhibitor—azoMTX—for Escherichia coli dihydrofolate reductase (eDHFR) by replacing some atoms of the original ligand, methotrexate, to achieve photoisomerization properties. This fine molecular design enabled quick structural conversion between the active “bent” Z isomer of azoMTX and the inactive “extended” E isomer, and this property afforded quantitative control over the enzyme activity, depending on the wavelength of irradiating light applied. Real-time photoreversible control over enzyme activity was also achieved.     

Visual image of neighbors to elicit wandering behavior in the soldier crab

The soldier crab appears in great numbers and feeds while wandering during daytime low tide. When they see an approaching object, they screw themselves into the sand. The mechanism of formation of mass wandering has not been clarified. In this study, to investigate if the soldier crabs use visual images of neighbors as a stimulus for wandering, dummy crabs were presented to crabs. In the experiments, one, two, four, or eight dummies were placed in a circle on a sand arena. Each crab was placed in the center of the arena and observed whether it burrowed into the sand or wandered. The proportions of wandering individuals in each experimental treatment were compared with the expected value. Significantly more crabs were wanderers when only two and four dummies were present. This result suggests that soldier crabs chose burrowing or wandering depending on visual image of the distribution of the neighbors.