Optimal virtual topologies for one-to-many communication in WDM paths and rings

In this paper we examine the problem of constructing optimal virtual topologies for one-to-many communication in optical networks employing wavelength-division multiplexing. A virtual topology is a collection of optical lightpaths embedded in a physical topology. A packet sent from the source node travels over one or more lightpaths en route to its destination. Within a lightpath, transmission is entirely optical. At the terminus of a lightpath the data is converted into the electronic domain where it may be retransmitted on another lightpath toward its destination. Since the conversion of the packet from the optical to the electronic domain introduces delays and uses limited physical resources, one important objective is to find virtual topologies which minimize either the maximum or average number of lightpaths used from the source to all destination nodes. Although this problem is NP-complete in general, we show that minimizing the maximum or average number of lightpaths in path and ring topologies can be solved optimally by efficient algorithms.     

Fundamental properties of radiation from a leaky mode excited on a planar transmission line

By using a specific normalization, it is shown that the TM/sub 0/ radiation field from a leaky mode that is excited by a source on any printed-circuit structure can be represented in a unified manner. The general properties of the normalized leaky-mode radiation field are examined in detail for a variety of phase and attenuation constants, as well as distances from the source, and for different types of source excitations. The normalized leaky-mode radiation field is compared to similarly normalized geometrical-optics and far-field radiation expressions to provide further insight into the nature of the radiation fields in the near- and far-field regions. The results provide a general view of leaky-mode radiation properties independent of the type of planar transmission line or background structure.     

Fabrication and characteristics of high-speed implant-confined index-guided lateral-current 850-nm vertical cavity surface-emitting lasers

Process technology of high-speed implant-apertured index-guide lateral-current-injection top dielectric-mirror quantum-well 850-nm vertical cavity surface-emitting lasers (VCSELs) has been developed. Oxygen and helium implantation for aperture definition and extrinsic capacitance reduction, dielectric mirror formation, p- and n-ohmic contact formation, VCSEL resistance, and thermal analysis were investigated. Employing this technology, GaAs/AlGaAs-based 850-nm VCSELs with small signal modulation bandwidths up to 11.5 Gb/s and an eye diagram generated at 12 Gb/s by a pseudorandom bit sequence of 2/sup 31/-1 were achieved. The bit-error rates were below 10/sup -13/. The threshold current is as low as 0.8 mA for 7-/spl mu/m-diameter current apertures and typical slope efficiencies of 0.45-0.5 mA/mW were obtained.     

A 5 mW and 5% efficiency 210 GHz InP-based heterostructure barrier varactor quintupler

This letter reviews the design, construction, and measurement of a 210 GHz heterostructure barrier varactor frequency quintupler. The quintupler utilizes planar heterostructure barrier varactors (HBVs) based on the InGaAs/InAlAs/AlAs material system and has produced a measured output power of 5.2 mW with 5.2% conversion efficiency at 210 GHz. This performance is comparable to the state-of-the-art results reported in the literature for HBV frequency triplers operating at millimeter and submillimeter wavelengths.     

Low surface energy films based on partially fluorinated isocyanates: the effects of curing temperature

Self-stratification strategy can be used to prepare films in which both bulk and surface properties can be optimized. By using this approach, only a very small quantity of fluorinated species is needed to generate a surface with low surface energy. When cross-linking is involved during film formation, we are dealing with a competition behavior between the diffusion of fluorinated species and the formation of cross-linked network. In this study low surface energy polymeric films were prepared on the basis of partially fluorinated polyisocyanates, in combination with hydroxyl-end-capped three-armed solventless liquid oligoesters and modified hyperbranched polyesters. At a fluorine concentration of only 0.5 wt.%, contact angles of water and hexadecane can reach 120° and 80°, respectively. A surface energy as low as 10–15 mN/m can be obtained upon the addition of less than 1 wt.% of fluorine in the films. It was shown, from real time ATR-FTIR and contact angle measurements, that the curing temperatures demonstrated significant effects on the cross-linking rate as well as on the wettability of the films.     

Block Copolymer Surface Reconstuction: A Reversible Route to Nanoporous Films

Thin films of block copolymers have been used as templates and scaffolds for the fabrication of arrays of nanostructured materials. In general, a chemical modification of the film or the removal of one of the components by photodegradative methods is required to produce a nanoporous film that serves as a template or scaffold. Here, however, the preferential interaction of one of the components with a solvent is shown to produce a reconstruction of the block copolymer film that, upon drying, leads to the generation of a nanoporous template. The area density of the pores is identical to that of the original copolymer thin film. Since no chemical reactions occurr, the process is fully reversible. Upon heating the copolymer film above its glass‐transition temperature, mobility is imparted to the copolymer and the original copolymer film with oriented domains is recovered. The film reconstruction significantly simplifies the generation of nanoporous templates.     

Self-consistent scattering model of carrier dynamics in GaAs-AlGaAs terahertz quantum-cascade lasers

Intersubband electron scattering transport in terahertz GaAs-AlGaAs quantum cascade lasers is analyzed, using a full 13-level self-consistent rate equation model. The approach includes all relevant scattering mechanisms between injector-collector and active region states in the cascade structures. Employing an energy balance equation which includes the influence of both electron longitudinal optical phonon and electron-electron scattering, the method also enables evaluation of the average electron temperature of the nonequilibrium carrier distributions in the device. The electron temperature is found to give a strong influence on the output characteristics, particularly at very low temperatures. The threshold currents and electric field-current density characteristics are in very good agreement with experiment, implying that the model has a strong predictive capability.     

Laser-assisted sealing and testing for ceramic packaging of MEMS devices

In this work, a CO/sub 2/ laser-assisted silicon lid sealing process, utilizing Au80/Sn20 solder, for encapsulating gas breakdown test micro-electro-mechanical structures (MEMS) in a ceramic quad flatpack (CQFP) was studied. Wire bonded MEMS dies were sealed into CQFPs under various gas media, such as air, nitrogen, helium and vacuum. The gas breakdown test results showed a significantly higher breakdown voltage for vacuum packaged parts compared to those packaged in other various gas environments. Hermeticity testing according to MIL-STD-883E showed that the leak rate of the package was below 10/sup -8/ atm cc/s. The bonding was uniform and the bonding strength is believed to be comparable to the tensile strength of Au80/Sn20 solder.     

Anaphylaxis in Association with Heparin-Induced Thrombocytopenia

Heparin is almost universally used as an anticoagulant during hemodialysis. Rare but serious side effects of heparin therapy include heparin‐induced thrombocytopenia (HIT) and anaphylaxis, and these may lead to significant mortality and morbidity if left unrecognized. We are reporting a patient who developed HIT followed by an anaphylactoid reaction. This 8‐year‐old girl with Joubert's syndrome developed end‐stage renal disease secondary to nephronophthisis. She had a Permacath double‐lumen hemodialysis catheter placed in the right internal jugular vein and was started on hemodialysis using an Asahi B10 65 Dialyzer on 1/28/03. The platelet count at that time was 246 × 10³/mL. Beef lung heparin was used for anticoagulation. She was admitted for living related donor renal transplant on 2/10/03 but was found to be thrombocytopenic with a platelet count of 49 × 10³/mL. The transplant was postponed, a sepsis work‐up was performed, and she was started on antibiotics pending culture results. Hemodialysis was continued with heparin anticoagulation, and despite an improvement in the platelet count she had an acute anaphylactoid reaction 2 days later. The reaction occurred 20 min after starting her hemodialysis treatment and presented as acute onset of bronchospasm, agitation, and chest discomfort. She improved with nebulized albuterol and subcutaneous epinephrine. A review of her records revealed that she had received 6 hemodialysis treatments. The platelet count on 2/3/03, after 3 hemodialysis treatments, had been 242 × 10³/mL and on 2/8/03 after 5 treatments the platelet count was 72 × 10³/mL. HIT with anaphylaxis was suspected. Heparin was discontinued and the platelet count had returned to normal within 2 days. The diagnosis was confirmed by a positive heparin‐associated antibody test. While HIT is recognized as a complication in 1–5% of patients treated with heparin and has been well described in the literature, we could only find 2 reported cases of heparin‐induced anaphylaxis and in both cases there was accompanying thrombocytopenia. This patient further illustrates a possible linkage between these two phenomena. HIT is an important cause of thrombocytopenia in a patient on hemodialysis and continued exposure to heparin may induce anaphylaxis.