Integratable wide-band dual polarized antennas with rear field cancellation

Two variations of an integratable coplanar waveguide fed aperture stacked patch antenna are presented, which are capable of generating wideband dual polarized radiation. One of the antennas displays the desired characteristics for reducing polarization loss between an antenna remote unit (ARU) and mobile units at arbitrary angles. The other has a dual input structure and low cross-polarization useful for polarization diversity applications, or it can also produce circular polarization with the addition of a 90/spl deg/ hybrid. Back radiation concerns are addressed with the use of reflector patch elements. Results indicate that the rear directed radiation of the two slot coupled printed antennas mounted on small ground planes can be reduced across a wide bandwidth with the addition of a reflector element.     

Muscle composition and fatty acid profile in lambs fattened in drylot or pasture

The effects of two fattening systems on muscle composition and fatty acid profile were determined in an experiment using samples of the longissimus dorsi (LD) muscle of 24 ram lambs (slaughter weight 29–31 kg). The fattening systems were: (i) drylot (a mixture of maize, soybean, wheat and minerals) and (ii) grazing (Cynodon dactylon). The lambs fattened in the drylot system presented higher fat levels (p<0.01), but lower concentrations of moisture (p<0.01) and cholesterol (p<0.05). The lipid content presented a negative correlation with moisture and protein. In lambs fattened in the drylot system increasing levels of fatness of LD muscle were associated with a decrease (p<0.05) in myristic and palmitic acids, but myristic, palmitic and linoleic acids increased (p<0.05) as the cholesterol levels of the muscles increased.     

Close-spaced fused fibre wavelength division multiplexers with very low polarisation sensitivity

The authors describe the fabrication of high performance narrowband fused fibre wavelength multiplexers. A twisting technique is employed to reduce the polarisation sensitivity. Unlike other polarisation quenching methods, twisting maintains the intrinsically good temperature stability of the device. The twisting mechanism has been studied theoretically using a model with a realistic coupler cross-section.<>     

Use of C-SAM acoustical microscopy in package evaluations and failure analysis

Acoustical microscopy is gaining wide acceptance in the microelectronic packaging community. C-mode scanning acoustical microscopy, C-SAM, is widely used in package evaluations and for failure analysis. This paper discusses several specific topics. These include: (1) popcorn cracking in SMDs; (2) an evaluation of solder die attach in power packages; (3) an instance of top of die delamination which resulted in electrical failures; and (4) moisture sensitivity of other surface mount power packages and how it resulted in ball bond degradation during a new product qualification.     

投射光线

luminus Devices公司的工程师们测试高亮度LED,它们可照亮舞台、屏幕、商店和街道.作者:Martin Rowe, Senior Technical Editor Test & Measurement World 美国马萨诸塞州比尔里卡一当照明设计师Kevin Adams为Green Day在百老汇上演的音乐剧<美国白痴>(American Idiot)设计照明时,他想用白光照亮舞台.     

Radio propagation characteristics for line-of-sight microcellularand personal communications

To acquire a knowledge of radio propagation characteristics in the microcellular environments for personal communications services (PCS), a comprehensive measurement program was conducted by Telesis Technologies Laboratory (TTL) in the San Francisco Bay area using three base station antenna heights of 3.2 m, 8.7 m, and 13.4 m and two frequencies at 900 MHz and 1900 MHz. Five test settings were chosen in urban, suburban, and rural areas in order to study propagation in a variety of environments. This paper reports the LOS measurements in different environments, all of which show variations of signal strength with distance that have distinct near and far regions separated by a break point. It was also found that the location of the break point for different frequencies and antenna heights can be calculated based on first Fresnel zone clearance. The regression analysis reveals a slope that is less than two before the break point, while it is greater than two after the break point. This break distance can be used to define the size of microcell and to design for fast hand-off. Beyond the first Fresnel zone break distance the base station antenna height gain was observed to approximately follow the square power law of antenna height     

Assessment of vitrified CBN wheels for precision grinding

Methods of measuring topographical features of grinding wheels are reviewed. Each technique has advantages and limitations for resolution, measuring depth, ease of application, data analysis and interpretation. Results obtained vary according to the method and instrument employed. Advantages and difficulties experienced with different techniques are discussed. Different replication techniques and materials are compared and suggestions made. A set of parameters that describe the wheel and grain characteristics is defined. Experimental studies with grinding wheels having different structures are carried out in terms of observations and measurements of changes in wheel topography. Experimental results are analysed and discussed in relation to theoretical understanding of abrasive wear and loading.     

Process Controls for Individual Section Machines

Improving the productivity of a container manufacturing operation requires reducing the art in the operation of the process and adding process controls. Reducing the art, in turn, requires providing machine control mechanisms that will provide a consistent and repeatable machine operation independent of operator experience. For a glass container line the control mechanisms must provide for a consistent glass flow, a gob distributor synchronized with the gob feeder, a control means for repeatable on-off actuation and velocity control for the mechanical motions on the individual section (IS) machine, and synchronized take-away and stacker conveyors. A system combining these process control functions and providing a catalog of process adjustments by container type is described. This type of control system can provide for a de-skilled glass container manufacturing operation which is repeatable from one run to the next.     

Identification of photoluminescence features of an epoxy resin based on components features and curing effects

Photoluminescence features in a commercial grade cured DGEBA-based epoxy resin have been investigated with as objective to determine which of the material compounds are responsible for cured resin emissions. The origin of the bands has been approached by considering photoluminescence of base resin and hardener taken separately, of their mixture, and in the course of curing. Most of the bands observed in the cured resin could be interpreted based on those found in the components taken separately. Fluorescence of the cured resin appears dominated by two broad bands that are characteristic of the hardener and exhibits a blue shift by up to 30 nm in the course of curing which could be used for cure monitoring purpose of the investigated system. Fluorescence of the base resin is clearly detected in the resin cured with tertiary amine as catalyser. However, it is very weak if the catalyser is not added. Two phosphorescence processes have been isolated in the cured resin, one of them being related to the base resin. Finally, a chemiluminescence spectrum has been recorded in the course of curing, which has been related to either curing-related reactions or to an oxidation process.     

PROPERTIES, WELDABILITY AND APPLICATIONS OF ADVANCED WROUGHT SUPERALLOYS FOR GAS TURBINE ENGINES

Alloy selection and alloy design both require consideration of an array of material attributes, including in-service properties, weldability and fabricability. Critical properties of advanced wrought superaUoys for gas turbine applications include high temperature strength, thermal stability, oxidation resistance and fatigue resistance. In this paper, the properties of twelve wrought solid-solution-strengthened and six age-hardenable superalloys are compared. Weldability is an important attribute and can be a major limiting factor in the use of certain alloys. Weldability test methods are discussed and the resistance of alloys to solidification cracking and strain-age cracking is compared. The use of weldability testing in the development of modern wrought superalloys is discussed with several examples cited. Finally, alloy selection for gas turbine components is outlined, taking into account both alloy properties and fabricability.