碳纳米管及其批量制备研究进展

从碳纳米管的优异性能和应用出发,综述了碳纳米管的制备方法以及我国目前在碳纳米管研究中面临的问题;分析了碳纳米管产业化对的我国纳米技术产业化发展的积极意义,特别介绍了清华-南风纳米粉体产业化工程中心开发的、具有我国自主知识产权的纳米聚团流态化技术。     

可见光共振腔发光二极管的研究进展

共振腔发光二极管是一种具有优良发光性能的光电器件。概述了对可见光共振腔发光二极管的共振腔结构、反射镜材料体系、基本工作机理和发光特性，并展望了这种器件的发展前景。     

增塑对UV固化型高分子固体电解质性能的影响

将合成的大分子量的聚乙二醇丙烯酸酯(PEGDA)齐聚物与光引发刑、LiClO4组成光敏体系，与一定比例的碳酸乙烯酯(EC)、碳酸丙烯酯(PC)或其混合物进行混合，经紫外光辐照制得了一种新型的高分子固体电解质膜，考察了增塑刑种类和用量对光固化速率、电导率和机械性能的影响。结果表明，增塑是提高UV固化型高分子固体电解质导电性能的有效方法，在机械性能满足使用要求的条件下，增塑的UV固化型固体电解质的电导率可以高达10^-4S／cm左右。     

Bioactivity of antifouling paints based on organotin toxicants

This paper discusses the bioactivity of antifouling paints based on organotin toxicants, such as tributyltin fluoride (TBTF) and triphenyltin fluoride (TPTF). These compounds were used alone or mixed as the main toxicant in formulations. The use of TPTF or mixtures of TPTF and TBTF, with vinyl binders, led to paints with satisfactory bioactivity during a 24 months immersion period. With the same binders, TBTF alone provided only 12 months of antifouling protection. The correlation coefficients calculated from the fouling attachment values and the rosin content in the binder showed that the bioactivity of the tested formulations depended on the solubility of the toxicant in sea water and on the composition and solubility of the binders.     

活塞杆断裂失效分析

针对一台往复式主风机的活塞杆断裂事故,对活塞杆的化学成分、金相组织及断口进行分析,找出了断裂原因,提出了制造过程中存在的问题以及防止类似问题的发生应采取的措施。     

国外大型调水工程渠道运行控制综述

与常规的以经验为主的运行方式相比，考虑了水动力学影响、以多渠池串联的整个渠道系统为研究对象的渠道运行控制在增加调水工程的安全性、降低运行成本、提高输水效率等方面能取得更佳的效果。国外关于调水工程渠道控制的研究起步较早，基于非线性偏微分圣维南方程组发展了多种离散化、线性化等简化方法，建立了相应的控制模型，并从不同角度确定了其控制方法以及控制算法。参考已有的研究思路和方法，总结国外渠道运行控制的成果，对我国南水北调工程的运行控制有着重要的借鉴意义。     

Income, Time Effects and Direct Preferences in a Multimodal Choice Context: Application of Mixed RP/SP Models with Non-Linear Utilities

Transport problems typically involve at least two types of constraints, on income and on time. Therefore, the indirect utility function depends either on the income available after having subtracted the cost of the discrete alternative and on the free time left after having worked and travelled by each competing option. In the typical linear-in-the-attributes and in-the-parameters specification, that represents the first grade approximation of the indirect utility function, the effect of income and time constraints cancel out and only the cost and time of the alternatives matter in the comparison between them. From a microeconomic point of view this is equivalent to assume that income and time effects could be disregarded; which is not always the case. To account for these effects the utility function should include second order attributes; however, in non-linear utility functions it may not be easy to distinguish among several effects that could be relevant: direct preferences for good and leisure, and simple interactions between attributes other than income and time effects. This paper analyses these effects from a theoretical point of view focusing on the possible confounding problem in detecting income and time effects. We use a dataset collected for a modal choice context and containing both revealed and stated preference data, and estimate several NL models examining the effect of the different second-order terms on detecting income and time effects. We compared specifications including square cost and time attributes, interactions between time and cost, cost divided by the income available to be spent on free time, and time multiplied by free time. Our results confirm the strong effect of direct preferences for goods and leisure time on choice, and the potential confounding effect between quadratic attributes and other non-linear omitted terms. Finally, we also found that care should be taken in highlighting income and time effects using mixed data sources, since confounding effects can occur when non-linearities are accounted for in both data sets.     

Recovering spectral data from natural scenes with an RGB digital camera and colored filters

Many spectral‐recovery methods using RGB digital cameras assume the underlying smoothness of illuminant and reflectance spectra, and apply low‐dimensional linear models. The aim of the present work was to test whether a direct‐mapping method could be used instead of a linear‐models approach to recover spectral radiances and reflectances from natural scenes with an RGB digital camera and colored filters. In computer simulations, a conventional RGB digital camera with up to three colored filters was used to image scenes drawn from a hyperspectral image database. Three measures were used to evaluate recovery with the direct‐mapping method: goodness‐of‐fit, root‐mean‐square error, and a color‐difference metric. It was found that with two and three filters both spectral radiances and reflectances could be recovered sufficiently accurately for many practical applications. With little increase in computational complexity, an RGB camera and a few colored filters can provide significantly better recovery of natural scenes than an RGB camera alone. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 352–360, 2007     

创新理论体系 绽放中餐魅力——论中餐企业的形象策划

本文指出了中餐企业形象建设存在的问题和不足,提出中餐企业可通过树立科学的发展观和正确的经营观念,积极导入CI系统建立个性化的鲜明的企业形象,重点论述了理念识别、行为识别、视觉识别、听觉识别、味觉识别等中餐企业特有的五大识别系统的策划、设计的原则和有效途径。     

钢样成分化验分析结果网络传输系统的开发与应用

钢样成分化验分析结果网络传输系统将碳硫分析仪、光谱分析仪和相应的计算机控制系统按以太网络结构组联,形成"炉前分析网络",采用分析网主服务器系统软件和网络分析系统软件实现网络传输。该系统可将炉前钢样化验分析结果实时传输到炉前大屏,具有传输速度快、准确率高的特点,提高了工作效率和产品合格率,降低了生产成本。