变频调速技术在济钢焦化厂高压氨水泵上的应用

济钢焦化厂高压氨水泵变频调速系统采用变频器和PLC相结合的方式 ,具有调速精度高、节能等多种功能 ,保证氨水泵正常工作。全年可增加经济效益 77.3万元。     

关于项目管理中施工进度控制的研究

阐述了项目管理中施工进度控制的地位与作用，分析了影响工程进度的因素，提出项目进度控制需做好的工作，以提高进度控制水平，确保合同工期的实现。     

用φ20mm离心萃取器两步法制取高纯钇

本文研究了中钇富镧稀土的氧化物溶液在环烷酸中的萃取行为，测定了镧钇组成、温度变化与分离系数的关系；在Ｐ＿（５０７）体系中研究了ｐＨ值与分配比的关系；提出用环烷酸、Ｐ＿（５０７）两种萃取剂制备高纯钇的工艺流程。用８４台φ２０ｍｍ离心萃取器进行了一个月的台架试验，结果证明两种萃取剂有很好的互补性，在满足钇的纯度要求下有较高收率。离心萃取器具有易分相、体系存留量少、液流密闭性好等优点，它更适宜于粘度大、级数多、产品纯度要求高的体系。     

Image analysis of comet assay measurements

In the last decade the 'comet assay' or 'single cell gel electrophoresis assay' has been established as a sensitive method for the detection of DNA damage and the measurement of its recovery. The results published in the literature have often been obtained with different methods for comet structure measurement. In most cases these data are not comparable with each other. Even when using similar systems for the analysis, it is difficult to obtain matching data. This presentation will describe some technical aspects of our measurement equipment and evaluation software. It focuses on necessary experimental conditions to minimize errors in obtaining such data. The software developed here allows the rapid analysis of the microscopic samples (< 2 s per image). The image analysis was designed with respect to the morphological shapes of comet cells, which were investigated with a confocal laser microscope. The system is built with standard components which are commercially available. As a measure of the amount of DNA damage the ratio of fluorescence intensity was used inside the comet tail and the fluorescence intensity of the comet head. Other parameters such as DNA content, comet area, head radius, tail length and tail moment are also determined. The reproducibility of the system has been evaluated in several experiments over a period of 5 years.     

钇铁石榴石薄膜材料的光吸收谱及Bi,Al掺入对谱的影响研究

采用单离子晶场跃迁模型，拟合出钇铁石榴石（ＹＩＧ）薄膜材料的光吸收谱，与实验谱吻合得较好。从实验和理论上分析了（ＢＩＡＩ）ＹＩＧ 薄膜材料的光吸收谱，结果表明，Ａｌ３＋离子的作用如同稀释剂一样，减小了光吸收，Ｂｉ３＋离子由于其强的自旋轨道耦合作用，增大了跃迁振子强度和跃迁线宽，从而增大了光吸收损耗，在此基础上所作的（ＢｉＡｌ）ＹＩＧ的理论谱与实验谱符合得较好。     

Observation of atomic steps on CaCO3 crystal surface

By using scanning polarization force microscopy,the deliquescence process and the atomic steps on the cleavage surface of CaCO3 in air were studied in situ.Under an exposure to medium umidity(-57%),the sloiw step movement has been observed.     

步进式加热炉炉温优化设定模型及软件开发

针对线材厂步进式加热炉实际工况，提出了基于经验规则的炉温优化设定模型和在线自学习获取知识的思想，并以炉温优化设定模型为核心，开发出加热炉计算机控制系统的优化运行软件。     

镀铜／镍聚丙烯腈纤维填充复合材料电磁波屏蔽性能的研究

研究了镀铜／镍的聚丙烯腈纤维填充ＡＢＳ树脂制得的复合材料的导电性及电磁波屏蔽性能，复合材料的导电性主要与导电纤维的填加量有关，导电纤维与基体树脂间的相容状况、复合加工时某些工艺条件等对复合材料的导电性也有较大的影响，电磁波屏蔽性能随导电纤维填加量的增加而提高，加入适当的偶联剂有助于改善和复合材料的电磁波屏蔽性能。     

Microstructure of Pd_(77.5)Au_6Si_(16.5) Alloy Droplet Solidified in a Drop Tube Process

The microstructure development of Pd77.5Au6Si16.5 alloy droplet solidified in a drop tube process was studied. It was found that two distinct microstructures, i.e. (Pd,Au)3Si primary phase and Pd+(Pd,Au)3Si eutectic can be obtained when the droplet diameter is within the range between 2.3~0.4 mm. The morpologies of the (Pd,Au)3Si developed from dendrite trunk-like with single branching only into dendrite cluster-like with ternary branching with the decrease of the droplet diameter. When the droplet diameter is about 0.25 mm, the primary phase (Pd,Au)3Si almost disappears and the microstructure mainly shows Pd+(Pd,Au)3Si eutectic. The morphology of the eutectic transforms from fiber-like to plate-like with the decrease of the droplet diameter in the range between 2.3-0.25 mm. When the droplet diameter is about 0.19 mm, the microstructure is only the single phase of Pd solid solution