制盐设备用不锈钢及复合板的选材

OOCr18Ni5Mo3Si2(以下简称18－5）属铁素体（α）－奥氏体（γ）双相不锈钢，具有良好的耐Cl^-点蚀和应力腐蚀性能，18－5不锈钢复合板因其兼备优良的使用性能和较低的制造成本，在制盐领域不锈钢材料中，是理想的选择。本就OOCr18Ni5Mo3Si2双相不锈钢及复合板的性能、特点以及在制盐领域的成功事例作一介绍。     

Composite group vector space method for estimating melting and boiling point of pure organic compound

Composition Group Vector Space (CGVS) method for estimating melting and boiling point T _m , T _b of organic compound has been proposed, and the principle of this method has been elucidated. The models for estimating T _m , T _b have been established and the numerical values of relative parameters have been presented. The average percentage deviations of T _m , T _b estimation are 7.53 and 1.58, respectively, which show that the present method demonstrates significant improvement in applicability to predict the above properties, compared to conventional group methods.     

普通热轧钢材的合理洁净度及生产工艺探讨

钢凝固前、后生成的非金属夹杂物形貌和在钢中的分布特点不同,凝固前生成的夹杂物尺寸较大,在钢中随机分布,主要影响钢材的疲劳强度和延性等性能。凝固后生成的夹杂物尺寸小,主要在晶界富集析出。硅锰脱氧钢脱氧后钢液仍含有20×10-6以上溶解氧,这部分溶解氧在钢凝固后绝大多数会转变为微细的氧化物或氧硫化物夹杂。钢凝固后生成的夹杂物主要影响钢材的冲击韧性、韧-脆转换温度等性能。 对热轧长型材用普碳钢和低合金钢不必采用铁水脱硫预处理,对热轧钢板用普碳钢可采用铁水轻度脱硫预处理,对热轧钢板用低合金高强度钢可采用铁水脱硫预处理、炼钢过程抑制回硫和出钢过程脱硫的工艺。对超低硫低合金钢,在钢水炉外精炼脱硫处理过程钢-渣间须维持非常低的氧势,炉渣成分应控制在CaO:SiO2:Al2O3=60％～65％:4％-8％:30％～35％范围。 普通热轧长型材用钢脱氧后溶解氧含量可放宽至(30-50)×10-6,对中、厚板钢溶解氧含量必须较严格控制,最好采用铝脱氧将溶解氧控制在较低的水平,并将T[O]含量控制在50×10-6以下。采用降低炼钢终点钢水氧含量、出钢挡渣、CAS和CAB等较简易炉外精炼方法和防止铸坯夹渣等措施,能够生产满足普通热轧钢洁净度要求的高品质钢材。     

A multi-criterion interaction-oriented model with proportional rule for designing supply chain networks

Supply chain management has offered a way to improve the industrial environment becomes more competitive. While, the commonly seen methodologies may be effective in solving the production–distribution problem only from supplier- or customer-oriented consideration, those cannot present the interactive relationship between upstream and downstream enterprises. In the competitive semiconductor industry environment, considering the viewpoints of the supplier and consumer simultaneously is particularly required, because multiple manufacturing and demanding steps are performed at separate situations, concurrently. In this paper, we propose an interaction-oriented approach, which bases on the analytic hierarchy process (AHP) methodology and proportional rule, to solve the semiconductor distribution problem with multiple quantitative and qualitative criteria. The developed approach gives an expected satisfaction for the all participators of the whole chain while the cooperative information is shared perfectly and effectively. Analysis results demonstrate the proposed methodology is efficient and effective through a real world case study.     

电加热井的井筒温度场数学模型

运用传热学理论，通过对稠油从井底流出井筒的温度变化、井筒原油与地层之间热交换过程的传热机理研究，建立数学模型，可以模拟不同产量、不同含水的井筒温度剖面，以及电加热所需功率，从而为稠油井电加热生产方案的制定提供科学依据。     

Nanoscale Hybrid Langmuir－Blodgett Films Based on Cerium－Substituted Heteropolymolybdate and Polyquinoline

Nanoscale hybrid organic/inorganic Langmuir-Blodgett films of cerium-substituted heteropolymolybdates (CeHPMo) and π-conjugated macromolecule poly(1,2-dihydro-2,2,4-trimethyl) quinoline (PQ) were obtained with auxiliary film-forming material stearic acid(SA) or octadecylamine(ODA). The surface pressure-area isotherms illuminate the formation of the hybrid LB films of PQ/ODA/Ce-HPMo and PQ/SA/Ce-HPMo. The different film-forming mechanism was discussed when the different auxiliary film-forming materials were used in the system. The absorption spectra indicate that the molecules of PQ and Ce-HPMo are incorporated into the LB films. Tapping-mode AFM image reveals a granular surface texture of nanosized Ce-substituted heteropolymolybdate. STM image shows that the conductivity is greatly improved after Ce-substituted heteropolymolybdates are incorporated in the films.     

核磁共振测井在桩1区块底水稠油油藏开发中的应用

针对桩1区块特高含水期底水稠油油藏的开发特点,利用核磁共振测井资料定量评价其孔隙流体流动特性,准确划分产层,直接识别油、水层,准确地评价了区块剩余油分布情况.依此部署了水平井,取得了很好的开发效果.实践证明,核磁共振测井具备常规测井所不具备的某些技术优势,能解决一些特殊的地质问题,有广泛的应用前景.     

Run-Time Analysis for Atomicity

Writing and debugging concurrent (shared-variable) programs is notoriously difficult. This motivated the development of numerous static analysis and run-time analysis techniques designed to (help) ensure that concurrent programs satisfy common correctness requirements for concurrent programs, such as absence of race conditions and absence of deadlocks. This paper focuses on another common correctness requirement for concurrent programs, namely, atomicity, which requires that any set of concurrent invocations of designated procedures is equivalent to performing those invocations serially in some order. Run-time analysis algorithms for detecting violations of atomicity are presented. The algorithms vary in cost and precision.