Comprehensive Benefit Evaluation System for Low-Impact Development of Urban Stormwater Management Measures

In recent years, plenty of simulation research about the low impact development(LID) control effect has emerged, but studies on scheme comparison and evaluation are lacking. In this study, a comprehensive benefit evaluation system for LID, including environmental, economic, and social benefits, was established on the basis of Analytic Hierarchy Process(AHP) and urban storm water model. Above all, benefit identification, quantitative evaluation and scheme comparison of single LID measures were obtained according to site investigation, simulated calculation and theoretical analysis. Whereafter, LID combination plans were designed based on single LID measures with high comprehensive benefit values, and their comprehensive benefits were evaluated to obtain the optimal plan. Then, based on well-founded system combined with Storm Water Management Model (SWMM), the design and optimization of LID were conducted, with a case in Xi’an, China. It turned out that the preferential order of the LID single measures according to the comprehensive benefit was: bio-retention > rain barrels > low-elevation greenbelt > green roofs > permeable pavement. Five LID combination plans were designed based on bio-retention, rain barrels, low-elevation greenbelt, and green roofs. Evaluation results showed that plan I (bio-retention and green roofs) was the optimal LID combination plan.     

Stress Analysis of Elastic-Plastic Contact Damage in Ceramic Coatings on Metal Substrates

An elastic-plastic analysis of damage in ceramic coatings on metal substrates from contacts with spherical indenters is made using finite element modeling. Computations are carried out specifically for plasma-sprayed alumina:titania on a soft steel. The algorithm assumes an elastic sphere with frictionless contact on a flat elastic-plastic layered specimen, and incrementally evaluates the expanding contact field as a function of applied load. Two key aspects of the contact field are examined: (i) the indentation stress-strain curve; (ii) the damage zone geometry. Composite coating/substrate indentation stress-strain curves are computed for two coating thicknesses, using input material parameters from iterative fits to data from control tests on free-standing coating and substrate materials. Contours of principal shear stresses, most notably those contours corresponding to yield zone boundaries in both the softer substrate and the harder coating, are mapped out in the fully plastic region. Corresponding distributions of tensile stresses are also mapped out, and are shown to correlate with the locations of transverse fractures in the coating. General implications concerning material and geometrical design of ceramic-based layer structures are discussed.     

2,6-二氯-3-甲基苯胺合成新工艺

通过n-乙酰化保护氨基，氯磺酸与氨水反应在氨基对位形成磺酰胺阻塞基团，再经脱乙酰基，氯化，水解脱阻塞基团，合成2，6-二氯-3-甲基苯胺得到目标产物。与经典文献方法相比，用盐酸代替氢氧化钠脱除乙酰基，用氯酸钠和浓盐酸代替双氧水和浓盐酸或氯气的氯化方法，合成过程中省略了中间产物的分离步骤，以间甲苯胺计总摩尔收率从20％提高到了60．8％，产品纯度大于99．5％。     

聚甲基丙烯酰氧乙基二甲基丁烷基溴化铵共振光散射法测定核酸

通过光谱法研究聚甲基丙烯酰氧乙基二甲基丁烷基溴化铵(PMDB)和核酸的作用。结果表明通过共振光散射法用PMDB检测微量的DNA可靠、准确和简单。     

仿人智能橡胶制品的精密硫化控制

分析了橡胶制品硫化成型的对象特性，选择了硫化成型过程控制策略，研究了控制算法及其工程应用。研究结果表明，选择仿人智能控制作为硫化成型过程的控制策略时，可实现速度快、精度高的控制，且具有极强的鲁棒性。     

有色金属冶炼烟气SO2的回收治理及其资源化

简要说明了在有色金属冶炼过程中回收元素硫的必要性,介绍了火法冶金工艺中回收硫及其资源化的一些方法,简单讨论了不同方法的优缺点;主张综合利用回收硫资源发展市场需求的硫化工产品。     

粤北某市"土法炼砷"土壤中化学砷污染的研究

粤北某市“土法炼砷”造成的砷污染,严重破坏了当地生态环境,而且砷还会进入河流或地下水,严重威胁了当地及北江下游的饮用水安全和生态安全。本文对“土法炼砷”遗址现场进行调查取样,并对砷污染的特点进行了分析。     

超高密度磁记录的课题与展望

介绍了超高密度记录的研究开发状况 ,论述了垂直磁记录技术的课题以及采用TMR磁头的、记录密度为Subterabit in2 的记录 读出特性。作为高密度记录所必需的头 盘界面技术 ,提出了接触记录技术的课题 ,还就STM (Scanningtunnelingmicroscopy)存储器论述了未来超高密度技术     

Adaptive tracking control of leader–follower systems with unknown dynamics and partial measurements

In this paper, a decentralized adaptive tracking control is developed for a second-order leader–follower system with unknown dynamics and relative position measurements. Linearly parameterized models are used to describe the unknown dynamics of a self-active leader and all followers. A new distributed system is obtained by using the relative position and velocity measurements as the state variables. By only using the relative position measurements, a dynamic output–feedback tracking control together with decentralized adaptive laws is designed for each follower. At the same time, the stability of the tracking error system and the parameter convergence are analyzed with the help of a common Lyapunov function method. Some simulation results are presented to validate the proposed adaptive tracking control.     

Irganox(R) HP-136的抗氧化机理及对聚丙烯加工稳定性的影响

介绍了Irganox(R) HP-136在PP加工中的作用,表明它能有效地捕获烷基自由基,与传统的受阻酚类及亚磷酸酯类抗氧剂复配与传统的二元抗氧稳定体系相比,具有添加量少、抗氧性能优等优点.比较了Irganox(R) HP-136(3-芳基-苯并呋喃酮)与传统抗氧剂的抗氧机理,并分析了在聚合物稳定体系中的作用.