EXTERNAL FLUID HEATING OF A POROUS ED

This work deals with the thermal analysis of externally heated porous beds of finite length. A one dimensional model was developed that includes conduction and storage in both the fluid and bed, convective exchange between the fluid and bed, and the effect of adsorption/desorption in the bed. This model results in two coupled differential equations for the fluid and bed temperatures as functions of four independent dimensionless parameters. These equations were solved numerically using finite difference approximations. A truncation error analysis was carried out to maintain an accurate solution. The method of normalization is such that the results of this analysis are of use in bed design when the breakthrough characteristics in finite length beds are of interest. A method to measure bed thermal performance is defined and a means to optimize bed thermal performance is presented. An experiment was conducted to validate the numerically obtained results. A comparison of numerical to experimental results is presented     

Analysis of seed oils containing cyclopentenyl fatty acids by combined chromatographic procedures

The fatty acids of seed oils of the Flacourtiaceae,Hydnocarpus anthelmintica, Caloncoba echinata andTaraktogenus kurzii, have been examined by a combination of capillary gas chromatography, silver ion high performance liquid chromatography and gas chromatography-mass spectrometry. In addition to the common range of cyclopentenyl fatty acids found in such oils, 13-cyclopent-2-enyltridec-4-enoic acid was a major component ofH. anthelmintica and was identified by mass spectrometry as its picolinyl ester and dimethyldisulphide adduct. It has not previously been found in nature. In the other seed oils, the isolated double bond in the corresponding fatty acid was in position 6, as expected. Similarly,cis-4-hexadecenoic acid and C₁₆ and C₁₈ cyclopentyl fatty acids were identified for the first time inH. anthelmintica. Iso- andanteiso-methylbranched fatty acids were present in trace amounts.     

Synthesis of hyperbranched P poly(glycerol-diacid) oligomers

Novel oligomeric prepolymers were synthesized by acid-catalyzed condensation of glycerol with iminodiacetic, azelaic, or succinic acid. The prepolymers were obtained, on average, in 62% yield and were characterized by ¹³C NMR, ¹H NMR, matrix-assisted laser desorption ionization-time of flight-mass spectrometry, and gel permeation chromatography. The synthesized oligomers had an average M.W. of 1543 Daltons (average polydispersity (PD)=1.34, average degree of polymerization (DOP)=5.5). Hyperbranching was evident in the oligomers produced when using azelaic acid and succinic acid as co-monomers with glycerol, whereas the reaction between iminodiacetic acid and glycerol resulted in linear products bearing cyclic urethane structures.     

Feeding response of Ips paraconfusus to phloem and phloem metabolites of Heterobasidion annosum-inoculated ponderosa pine,Pinus ponderosa

In studies of feeding by the bark beetle, Ips paraconfusus, two pine stilbenes (pinosylvin and pinosylvin methyl ether), ferulic acid glucoside, and enantiomers of the four most common sugars present in ponderosa pine phloem (sucrose, glucose, fructose, and raffinose) did not stimulate or reduce male feeding when assayed on wet -cellulose with or without stimulatory phloem extractives present. When allowed to feed on wet -cellulose containing sequential extracts (hexane, methanol, and water) of ponderosa pine phloem, methanol and water extractives stimulated feeding, but hexane extractives did not. Males confined in wet -cellulose containing aqueous or organic extracts of culture broths derived from phloem tissue and containing the root pathogen, Heterobasidion annosum, ingested less substrate than beetles confined to control preparations. In an assay using logs from uninoculated ponderosa pines, the mean lengths of phloem in the digestive tracts increased as time spent feeding increased. Males confined to the phloem of basal logs cut from ponderosa pines artificially inoculated with H. annosum ingested significantly less phloem than beetles in logs cut from trees that were (combined) mock-inoculated or uninoculated and did not contain the pathogen. However, individual pathogen-containing treatments were not significantly different from uninoculated controls. It was concluded that altered feeding rates are not a major factor which may explain why diseased ponderosa pines are colonized by I. paraconfusus.     

Effect of precipitated silica on plate-out of poly(vinyl chloride) compounds

Plate-out is the undesired deposition of materials from a compound onto the surface of processing equipment. Plate-out causes problems with quality control and down-time. Changes in processing conditions can help alleviate plate-out, but adjustments in the formulation are usually needed for significant improvements in plate-out, the deposition. The addition of precipitated silica to a PVC formulation is a simple and effective method to reduce plate-out. This study explores the relationship between plate-out reduction and the physical properties of precipitated silica. Silica properties such as surface area, average particle size, and oil absorption can all be controlled by a patented process developed by the Chemicals Division of J. M. Huber Corporation. Plate-out reduction is related to the properties of precipitated silica, the loading of the silica, the order of addition, and type of PVC formulation. The effect of precipitated silica on the physical properties of the PVC compound, such as, tensile strength, tear strength, elongation and stiffness, are explored. Finally, the effectiveness of plate-out reduction by precipitated silica as compared to fumed silica will be discussed.     

Preparation and properties of high molecular weight poly(1-germa-) or poly(1-sila-cis-pent-3-enes)

High molecular weight poly(1,1-dimethyl-1-germa-cis-pent-3-ene), poly(1,1-diphenyl-1-germa-cis-pent-3-ene), poly(1,1-dimethyl-1-sila-cis-pent-3-ene), and poly(1-methyl-1-phenyl-1-sila-cis-pent-3-ene) have been prepared. The thermal stability of these polymers is found to increase with their molecular weight.     

Synthesis and Microstructure of Highly Oriented Lead Titanate Thin Films Prepared by a Sol-Gel Method

Thin films of PbTiO₃ were deposited on fused silica, resistor-grade alumina, and single-crystal (100) MgO by a sol–gel processing method. Whereas the films deposited on silica and alumina substrates were randomly oriented and polycrystalline, highly {100} oriented PbTiO₃ films were grown on the MgO single crystals. The perovskite-type structure was observed with films deposited on the single-crystal MgO and annealed at temperatures as low as 470°C, whereas a pyrochlore-type strcuture was observed with films on fused silica and alumina processed in a similar manner. All films heat-treated at temperatures in excess of 570°C showed significant formation of a second PbTi₃O₇ phase. The films were characterized by electron microscopy and glancing-incidence-angle X-ray diffraction.     

Tissue-type plasminogen activator variants with domain duplications and rearrangements

The interactions between tPA domains that are important forcatalysis are poorly understood. We have probed the functionof interdomain interactions by generating tPA variants in whichdomains are duplicated or rearranged. The proteins were expressedin a transient mammalian expression system and tested in vitrofor their ability to activate plasminogen, induce fibrinolysisand bind to a forming fibrin clot. Duplication of the heavychain domains of tPA produced enzymatically active tPA variants,many of which demonstrated similar in vitro amidolytic and fibrinolyticactivity and similar fibrin affinity to the parent molecule.Zymographic analysis of the domain duplication tPA variantsshowed one major active species for each variant. Selectionof the residues duplicated and the interdomain spacing werefound to be critical considerations in the design of tPA variantswith duplicated domains. We also rearranged the domains of tPAsuch that kringle 1 replaced the second kringle domain and viceversa. An analysis of these variants indicates that the firstkringle domain can confer fibrin affinity to a tPA variant andfunction in place of kringle 2. Therefore, in wild-type tPA,the functions of kringle 1 and kringle 2 must be dependent partiallyon their orientation within the heavy chain of the protein.The functional autonomy of the heavy and light chains of tPAis demonstrated by the activity of a tPA variant in which theorder of the heavy and light chains was reversed.     

Epoxy allylic carbocations as conceptual intermediates in the biogenesis of diverse marine oxylipins

Marine organisms, especially marine algae, are extremely rich in a diversity of novel oxylipin structures. Many of these oxylipins contain functionalities and rings of a type and location unknown in mammalian systems. In this perspective reviewing marine oxylipins, a proposal is formulated for the central intermediacy of an epoxy allylic carbocation in the biogenesis of these diverse structures. This proposal is strengthened by the relatively large number of examples which are consistent with this type of mechanistic transformation.     

Preparation and Characterization of 17O-Enriched Alumina for Nuclear Fusion Damage Experiments

Alumina enriched in ¹⁷O was successfully fabricated from aluminum isopropoxide and water containing the ¹⁷O isotope. This material was necessary for an experiment to study the radiation damage expected in alumina exposed to a nuclear fusion reactor environment. The enrichment levels of specimens subjected to different preparation schedules were measured using a nuclear reaction analysis technique. Replacement of the ¹⁷O isotope in the ceramic by atmospheric oxygen occurred readily. Therefore, successful fabrication of suitably enriched alumina specimens required that all processing steps be performed under vacuum or inertgas environments. The optimum fabrication procedure produced enriched alumina specimens of >99.5% of theoretical density, ∽10-μm grain size, and a flexural strength of 280 MPa.