Microfluidic bioreactors for culture of non-adherent cells

Microfluidic bioreactors (μBR) are becoming increasingly popular for cell culture, sample preparation and analysis in case of routine genetic and clinical diagnostics. We present a novel μBR for non-adherent cells designed to mimic in vivo perfusion of cells based on diffusion of media through a sandwiched membrane. The culture chamber and perfusion chamber are separated by a sandwiched membrane and each chamber has separate inlet/outlets for easy loading/unloading of cells and perfusion of the media. The perfusion of media and exchange of nutrients occur through the sandwiched membrane, which was also verified with simulations. Finally, we present the application of this device for cytogenetic sample preparation, whereby we culture and arrest peripheral T-lymphocytes in metaphase and later fix them in the μBR. The expansion of T-lymphocytes from an unknown patient sample was quantified by means of CFSE staining and subsequent counting in a flow cytometer. To conclude on the applicability of μBR for genetic diagnostics, we prepare chromosome spreads on glass slides from the cultured samples, which is the primary step for metaphase FISH analysis.     

Alkaline biosolids and EDTA for phytoremediation of an acidic loamy soil spiked with cadmium

A greenhouse experiment was conducted to investigate the growth of Brassica juncea and Cd phytoextraction in a mimicked Cd contaminated acidic loamy soil amended with alkaline biosolids, prepared from sewage sludge and coal fly ash, in the presence and absence of EDTA at 2 mmol kg(-1). The acidic loamy soil was spiked with 0, 5, 20, 50 and 100 mg Cd kg(-1) in the form of CdCO(3) and then amended with 4% alkaline biosolids (w/w). Alkaline biosolids and 0.12% CaCO(3) amendments resulted in a higher biomass than unamended soil spiked with 20 mg kg(-1) Cd where plants did not survive and of the two amendments, alkaline biosolids amendment had higher plant dry weight yield and phytoextraction of Cd. Adding 2 mmol kg(-1) EDTA to alkaline biosolids amended soil significantly increased the solubility of Cd ions by 9- to 29-fold, but plant Cd accumulation decreased by a factor of 24-48%. The results indicate that alkaline biosolids amendment is an effective approach for assisting growth of B. juncea and phytoextraction of Cd from the contaminated acidic loamy soil, but further application of chelating agents did not enhance the phytoextraction efficiency of Cd.     

New Approaches to Evaluate the Performance of Firefighter Protective Clothing Materials

This paper presents new proposals in the evaluation and determination of the optimum materials suitable for use in the design and development of firefighter protective clothing by simultaneously addressing the conflicting factors of thermal protection [heat transfer index (HTI), radiant heat transfer index (RHTI) and thermal threshold index (TTI)] and anti-heat stress [water vapor resistance (WVR) and total heat loss (THL)]. To achieve this, this paper proposes new indices for the materials, two types of “total performance” indices, which are defined as the sum and the product of the competing factors of thermal protection and anti-heat stress. The results showed that the candidate materials of firefighter protective clothing were easily rated when the new indices were applied. Of five candidate materials viz. A, B, B₁, B₂ and C, the B sample, with values for HTI₂₄?=?13.2?±?0.2 s, RHTI₂₄?=?18.0?±?0.8 s, TTI?=?1132?±?33 J/m², WVR?=?17.5?±?0.3 m² Pa/W and THL?=?266.2?±?4.1 W/m², was found to exhibit the best total performance. However, the methods proposed to the scientific community in this paper have so far been validated on a limited data set only, and will require further validation by a wider group of researchers and with more samples. Lastly, comments on ISO 11999-3:2015 were also made for the further improvement and development of technical standards.     

Sputtering of Surfaces of the Solid Hydrogens

Sputtering of the solid hydrogens by electrons and ions exhibits features that may be related to quantum properties of these solids, i.e. a drastic enhancement of the yield for electron–bombarded thick deuterium films and a thermal peak at low ejection energies in the energy distribution of the sputtered particles.     

Liquidus Diagram of the Ba-Y-Cu-O System in the Vicinity of the Ba2YCu3O6+x Phase Field

This paper describes the melting equilibria in the vicinity of the high T_c phase Ba₂YCu₃O_6+x, including evidence for two Ba-Y-Cu-O immiscible liquids. Melting equilibria have been investigated in purified air using a combination of differential thermal analysis (DTA), thermogravimetric analysis (TGA), powder x-ray diffraction (XRD), MgO wick entrapment of liquid for analysis, scanning electron microscopy (SEM) coupled with energy dispersive x-ray analysis (EDS), and hydrogen reduction for determination of copper oxidation state. For relatively barium-rich compositions, it was necessary to prepare the starting materials under controlled atmosphere conditions using BaO. A liquidus diagram was derived from quantitative data for the melts involved in various melting reactions. In general the 1/2(Y₂O₃) contents of the melts participating in these equilibria were low (mole fraction <4 %). The primary phase field of Ba₂YCu₃O_6+x occurs at a mole fraction of <2.0 % 1/2Y₂O₃ and lies very close along the BaO-CuO_x edge, extending from a mole fraction of ≈43 % CuO to a mole fraction of ≈76 % CuO. It is divided by a liquid miscibility gap and extends on either side about this gap. The topological sequence of melting reactions associated with the liquidus is presented as a function of temperature. Implications for the growth of Ba₂YCu₃O_6+x crystals are discussed.     

Integrated SWCNT sensors in micro-wind tunnel for air-flow shear-stress measurement

We have developed SWCNT sensors for air-flow shear-stress measurement inside a polymethylmethacrylate (PMMA) “micro-wind tunnel” chip. An array of sensors is fabricated by using dielectrophoretic (DEP) technique to manipulate bundled single-walled carbon nanotubes (SWCNTs) across the gold microelectrodes on a PMMA substrate. The sensors are then integrated in a PMMA micro-wind tunnel, which is fabricated by SU-8 molding/hot-embossing technique. Since the sensors detect air flow by thermal transfer principle, we have first examined the I–V characteristics of the sensors and confirmed that self-heating effect occurs when the input voltage is above ~1 V. We then performed the flow sensing experiment on the sensors using constant temperature (CT) configuration with input power of ~230 μW. The voltage output of the sensors increases with the increasing flow rate in the micro-wind tunnel and the detectable volumetric flow is in the order of 1 × 10⁻⁵m³/s. We also found that the activation power of the sensors has a linear relation with 1/3 exponential power of the shear stress which is similar to conventional hot-wire and polysilicon types of convection-based shear-stress sensors. Moreover, measurements of sensors with different overheat ratios were compared, and results showed that sensor is more sensitive to the flow with a higher overheat ratio.     

123I和99Tcm标记的吲哚类σ2受体放射性示踪剂的设计、稳定化合物的合成及体外生物评价

设计了~(123)I和~(99)Tc~m标记的吲哚类σ_2受体肿瘤放射性示踪剂,合成了其稳定化合物 (Indole-I和Indole-MAMA-Re) 和标记前体(Indole-MAMA).体外受体结合分析结果表明,化合物Indole-I对σ1和σ_2受体的抑制常数K_i值分别为(0.574±0.355) μmol/L和(0.162±0.030) μmol/L(n=3),Indole-MAMA-Re对σ1和σ_2受体的抑制常数K_i值分别为(3.75±2.22) μmol/L和(7.83±4.87) μmol/L(n=3).成功制备了~(99)Tc~m-Indole-MAMA,纯化后经高效液相色谱法(HPLC)分析其放化纯大于90%.今后可在本文化合物的基础上通过结构优化,设计合成对σ_2受体具有高亲和力和选择性的吲哚类SPECT肿瘤显像剂.     

酿酒亲兄弟——记勃艮第Canpitain Gagnerot葡萄酒酒庄

在法国的勃艮第地区,大多数酿酒人在表达他们对于土地、葡萄以及酿酒的热忱与执著的同时,常表现出各自鲜明的个性。这些个性有时甚至是排他的,即便是兄弟姐妹之间也常会各立门户,独立酿酒。然而,在勃艮第Capitain Gagnerot酒庄(Domaine Capitain Gagnerot),现任的主人——一对稳重谦和的兄弟,却让人感受到这对酿酒亲兄弟间的真情。同时,让人感动的还有那款款溶有两兄弟真诚的佳酿。