The study of the interactions between graphene and Ge(001)/Si(001)

The interaction between graphene and germanium surfaces was investigated using a combination of microscopic and macroscopic experimental techniques and complementary theoretical calculations.Density functional theory (DFT) calculations for different reconstructions of the Ge(001) surface showed that the interactions between graphene and the Ge(001) surface introduce additional peaks in the density of states,superimposed on the graphene valence and conduction energy bands.The growth of graphene induces nanofaceting of the Ge(001) surface,which exhibits well-organized hill and valley structures.The graphene regions covered by hills are of high quality and exhibit an almost linear dispersion relation,which indicates weak graphene-germanium interactions.On the other hand,the graphene component occupying valley regions is significantly perturbed by the interaction with germanium.It was also found that the stronger graphene-germanium interaction observed in the valley regions is connected with a lower local electrical conductivity.Annealing of graphene/Ge(001)/Si(001) was performed to obtain a more uniform surface.This process results in a surface characterized by negligible hill and valley structures;however,the graphene properties unexpectedly deteriorated with increasing uniformity of the Ge(001) surface.To sum up,it was shown that the mechanism responsible for the formation of local conductivity inhomogeneities in graphene covering the Ge(001) surface is related to the different strength of graphene-germanium interactions.The present results indicate that,in order to obtain high-quality graphene,the experimental efforts should focus on limiting the interactions between germanium and graphene,which can be achieved by adjusting the growth conditions.     

Stabilization of Discrete Linear Repetitive Processes with Switched Dynamics

Repetitive processes are a distinct class of 2D systems (i.e. information propagation in two independent directions) of both systems theoretic and applications interest. They cannot be controlled by direct extension of existing techniques from either standard (termed 1D here) or 2D systems theory. Here we give new results on the relatively open problem of the design of physically based control laws. These results are for a sub-class of discrete linear repetitive processes with switched dynamics in both independent directions of information propagation. Published online: April 2006     

Dynamic axial crushing of circular tubes

A series of axial crushing tests on steel circular cylindrical shells loaded either statically or dynamically is reported and compared with various theoretical predictions and empirical relations. A modified version of Alexander's theoretical analysis for axisymmetric, or concertina, deformations gives good agreement with the experimental results when the effective crushing distance is considered and provided that the influence of material strain rate sensitivity is retained in the dynamic crushing case.     

On the formation of double zones of necking during hot tensile tests

The phenomenon of double necking during hot tensile tests is discussed in this work. The investigation was carried out on high-carbon steel using a tensile testing machine equipped with an integral heating system. Tensile tests were performed in a large temperature range to obtain the mechanical characteristic of the material. Microstructure evolution was observed by light microscopy and hardness measurements to determine the position of double zones of necking. A significant increase in flow stress of as-transformed austenite was found to be at the origin of the double necking behaviour.     

Thallium in soils and stream sediments of a Zn-Pb mining and smelting area

Thallium was determined in 120 samples of soil and 30 samples of stream sediments from the southeastern part of the Silesian-Cracowian zinc-lead ore deposits. Soil samples were taken from topsoils (0.0-0.2 m) and bottom soils (0.8 and 1.0 m). Thallium was determined by flow-injection-differential-pulse anodic stripping voltammetry. The samples were decomposed sequentially with 73% hydrofluoric acid and a mixture of nitric acid and hydrogen peroxide. The results showed that zinc-lead ore mining as well as their processing and smelting leads to a significant increase of thallium in the top layer of soil and in stream sediments. The highest recorded concentration was 150 ppm Tl for stream sediment and 35 ppm for a soil sample. Thallium concentration in small rivers from the investigated area was by 2 orders of magnitude higher than in the reference area. The highest recorded concentration being 3.24 microg L(-1).     

Biodegradation of oxo-alcohol ethoxylates in the continuous flow activated sludge simulation test

Biodegradation of two alpha-methyl branched oxo-alcohol ethoxylates (OAE) of different polydispersity: LIAL 125/14 BRD (LIALB) (broad M.W. distribution) and LIAL 125/14 NRD (LIALN) (narrow M.W. distribution), both having an average of 14 oxyethylene subunits (EO) and a C(12-15) alkyl moiety were tested under the continuous flow activated sludge conditions of the classical Husmann plant. Primary biodegradation and concentration of metabolites: free oxo-alcohol fraction (FOA) and poly(ethylene glycols) (PEG), were measured. PEG were divided into two fractions: short-chained PEG (PEGshch) (1-4 EO) and long-chained PEG (PEGlch) (>4 EO). The indirect tensammetric technique combined with an adequate separation was used for analysis. Central fission was found to be a highly dominating pathway, as is the case with fatty alcohol ethoxylates. OAE are highly primarily biodegraded (above 95%). High concentrations of FOA and PEG are formed. Once formed the PEGlch are further fragmented into the PEGshch. Free alcohol fraction compounds are biodegraded sooner when alkyl moiety is shorter. OAE polydispersity has an influence on the kinetics of biodegradation; PEG formed from LIALN are biodegraded slower and to a lower degree than those from LIALB.     

Influence of series resistance and cooling conditions on I–V characteristics of SiC merged PiN Schottky diodes

The paper presents the exemplary electro-thermal models of merged PiN Schottky diode – a diode with the parallel PiN junction, protecting the device against the uncontrolled voltage rise, causing so-called thermal runaway. In the presented models, the conductivity modulation effect in the PiN junction is taken into account. The influence of the PiN junction on the non-isothermal I–V characteristics of MPS diodes, for various cooling conditions, is discussed. It is shown, that the thermal runaway is possible, in spite of presence of protecting PiN junction.     

Change of pyrolysis characteristics and structure of woody biomass due to steam explosion pretreatment

Steam explosion (SE) pretreatment has been implemented for the production of wood pellet. This paper investigated changes in biomass structure due to implication of steam explosion process by its pyrolysis behavior/characteristics. Salix wood chip was treated by SE at different pretreatment conditions, and then pyrolysis characteristic was examined by thermogravimetric analyzer (TGA) at heating rate of 10 K/min. Both pyrolysis characteristics and structure of biomass were altered due to SE pretreatment. Hemicellulose decomposition region shifted to low temperature range due to the depolymerization caused by SE pretreatment. The peak intensities of cellulose decreased at mild pretreatment condition while they increased at severe conditions. Lignin reactivity also increased due to SE pretreatment. However, severe pretreatment condition resulted in reduction of lignin reactivity due to condensation and re-polymerization reaction. In summary, higher pretreatment temperature provided more active biomass compared with milder pretreatment conditions.     

Peanut Allergy,Peanut Allergens,and Methods for the Detection of Peanut Contamination in Food Products

ABSTRACT: Attention to peanut allergy has been rising rapidly for the last 5 y, because it accounts for the majority of severe food‐related anaphylaxis, it tends to appear early in life, and it usually is not resolved. Low milligram amounts of peanut allergens can induce severe allergic reactions in highly sensitized individuals, and no cure is available for peanut allergy. This review presents updated information on peanut allergy, peanut allergens (Ara h1 to h8), and available methods for detecting peanuts in foods. These methods are based on the detection of either peanut proteins or a specific DNA fragment of peanut allergens. A summary of published methods for detecting peanut in foods is given with a comparison of assay formats, target analyte, and assay sensitivity. Moreover, a summary of the current availability of commercial peanut allergen kits is presented with information about assay format, target analyte, sensitivity, testing time, company/kit name, and AOAC validation.