Effects of the Surface Contact on the Uncertainty in Indentation Yield Strength: Surface Roughness and Angular Misalignment

Metals and Materials International - We suggest a method for accurately estimating the uncertainty of indentation yield strength determined from the modified Meyer relation as a mathematical...     

Wear resistance characteristics of materials used in oil sands plants

The surge in demand for natural resources has shifted the focus of the international community toward the development of oil sands, shale oil, shale gas and other non-traditional energy sources. In extreme environments, materials used in petroleum gas plant modules are accompanied by various problems caused by low-temperature brittleness such as damage, corrosion and wear. Many researchers have been conducting studies to discover a suitable material whose lifespan could be improved by performing characteristics analyses and performance assessments. In this study, a material characteristics assessment was conducted based on a wear resistance test on materials that are commonly used at oil sands plants. Prior to a wear resistance test, a chemical composition analysis was performed on each of the specimens, and tensile, impact, hardness and corrosion tests were carried out to examine the correlation between their results with the results of the wear resistance test. Each test was performed according to ASTM G 105 standards, and the change in weight according to wear length was analysed for each material to determine the related tendencies. In addition, the results of the wear test were derived by analysing the change in the mass of the specimen before and after the test, and the surface roughness was assessed to analyse the performance related to wear and define the service life. The aim was to use these results to select a material that would be suitable for the abrasive environment of the key equipment and materials of plants.     

Failure analysis of Cu(In,Ga)Se2 photovoltaic modules: degradation mechanism of Cu(In,Ga)Se2 solar cells under harsh environmental conditions

High‐temperature‐induced and humidity‐induced degradation behaviors were investigated through the failure analysis of encapsulated Cu(In,Ga)Se₂ (CIGS) modules and non‐encapsulated CIGS cells. After being exposed to high temperature (85 °C) for 1000 h, the efficiency loss of CIGS modules and the resistivities of the aluminum‐doped zinc oxide (AZO) layer, CIGS layer, and Mo layer were slightly increased. After damp heat (DH) testing (85 °C/85% RH), the efficiency of some modules decreased significantly accompanied by discoloration, and in these areas, the resistivity of the AZO layers increased markedly. The causes of degradation of CIGS cells after high temperature and DH tests were suggested through X‐ray photoelectron spectroscopy analysis. The high‐temperature‐induced degradation behaviors were revealed to be increases in series resistance of the CIGS cells, due to the adsorption of oxygen on the AZO, CIGS, and Mo layers. The degradation behavior after DH (85 °C/85% RH) exposure was caused by the adsorption of oxygen, as well as the generation of Zn(OH)₂ due to water molecules. In particular, the humidity‐induced degradation behavior in discolored CIGS modules was ascribed to the generation of Zn(OH)₂ and carboxylic acids in the AZO layer, due to a chemical reaction between the AZO, ethylene‐vinyl acetate copolymer, and water. Copyright © 2014 John Wiley & Sons, Ltd.     

The effect of the viscosity ratio of dispersed phase to matrix on the rheological,morphological, and mechanical properties of polymer blends containing a LCP

The effect of the viscosity ratio of the dispersed LCP phase to the polystyrene/poly(phenylene oxide) (PS/PPO) thermoplastic matrix on the rheological, morphological, and resultant mechanical properties of the LCP blends was investigated. The viscosity of PS/PPO is largely dependent on the blend composition, so that different levels of viscosity ratios of dispersed LCP phase to PS/PPO thermoplastic matrix are obtained by using PS/PPO premixtures of different blend ratios as a thermoplastic matrix. When the viscosity of the LCP dispersed phase is lower than that of the thermoplastic matrix, finely distributed fibril structure of LCP is obtained. Tensile modulus of injection molded specimens show a positive deviation from the additive rule when the viscosity ratio (η_LCP/η_matrix) is smaller than unity. These improvements in tensile modulus are attributed to the formation of finely distributed LCP fibrils. © 1996 John Wiley & Sons, Inc.     

Morphological core/shell structure and dispersion stability of water-dispersible copolyester graft polymerized with acrylic acid and ethyl acrylate

Anionic water-dispersible copolyester was prepared by the polycondensation of dimethyl isophathalate (DMI)/5-sodium sulfo dimethyl isophathalate (DMS) with ethylene glycol (EG)/ diethylene glycol (DEG) to synthesize water-dispersible copolyester-g-AA/EAs by chemical method. In the case of graft polymerization of AA/EA onto DMI/DMS/EG/DEG copolyester does not. This is a result of the core/shell structure that was ascertained by the graft yield and the zeta potential of copolyester-g-AA/EAs. It appears that grafted AA/EA exists at the surface of copolyester-g-AA/EA particles, and the backbone polymer, i.e., DMI/DMS/EG/DEG copolyester, exists in the inner phase of the copolyester, -g-AA/EA particles. The complete solubility of copolyester-g-AA/EAs in 1N NaOH aqueous solution seems to come mainly from the electrostatic repulsion between  COOs that are present at the surface of copolyester-g-AA/EA particles due to AA grafting and  OHs that are present at the dispersion medium due to NaOH decomposition and which cause the hydrolytic breakage and consequently the coagulation of copolyesters in alkaline medium. © 1996 John Wiley & Sons, Inc.     

Genetic Diversity and Association Analysis for Carotenoid Content among Sprouts of Cowpea (Vigna unguiculata L. Walp)

The development and promotion of biofortified foods plants are a sustainable strategy for supplying essential micronutrients for human health and nutrition. We set out to identify quantitative trait loci (QTL) associated with carotenoid content in cowpea sprouts. The contents of carotenoids, including lutein, zeaxanthin, and β-carotene in sprouts of 125 accessions were quantified via high-performance liquid chromatography. Significant variation existed in the profiles of the different carotenoids. Lutein was the most abundant (58 ± 12.8 mg/100 g), followed by zeaxanthin (14.7 ± 3.1 mg/100 g) and β-carotene (13.2 ± 2.9 mg/100 g). A strong positive correlation was observed among the carotenoid compounds (r ≥ 0.87), indicating they can be improved concurrently. The accessions were distributed into three groups, following their carotenoid profiles, with accession C044 having the highest sprout carotenoid content in a single cluster. A total of 3120 genome-wide SNPs were tested for association analysis, which revealed that carotenoid biosynthesis in cowpea sprouts is a polygenic trait controlled by genes with additive and dominance effects. Seven loci were significantly associated with the variation in carotenoid content. The evidence of variation in carotenoid content and genomic regions controlling the trait creates an avenue for breeding cowpea varieties with enhanced sprouts carotenoid content.