Volatile components in defensive spray of the hooded skunk,Mephitis macroura

GC-MS analysis of the anal sac secretion from the hooded skunk, Mephitis macroura, showed the following seven major components comprised 99% of the volatiles in this secretion: (E)-2-butene-1-thiol, 3-methyl-1-butanethiol, S-(E)-2-butenyl thioacetate, S-3-methylbutenyl thioacetate, 2-phenylethanethiol, 2-methylquinoline, and 2-quinolinemethanethiol. Minor volatile components identified in this secretion are phenylmethanethiol, S-phenylmethyl thioacetate, S-2-phenylethyl thioacetate, bis[(E)-2-butenyl] disulfide, (E)-2-butenyl 3-methylbutyl disulfide, bis(3-methylbutyl) disulfide, and S-2-quinolinemethyl thioacetate. This secretion is similar to that of the striped skunk, Mephitis mephitis, differing only in that it contains four compounds not reported from the striped skunk: phenylmethanethiol, S-phenylmethyl thioacetate, 2-phenylethanethiol, and S-2-phenylethyl thioacetate.     

Structure-function studies of an IGF-I analogue that can be chemically cleaved to a two-chain mini-IGF-I

The structure and biological activities of two disulphide isomersof a C-region deletion mutant of insulin-like growth factor-I(IGF-I) which has an Asn–Gly link engineered at the junctionof the A- and B-regions were studied before and after chemicalcleavage. Circular dichroism (CD) spectra and binding affinityto IGF binding protein 3 (IGFBP3) indicated that the treatmentwith hydroxylamine did not disrupt the overall tertiary foldof the hormones. Cleavage restored some binding affinity forthe IGF-I receptor in both isomers and weakly restored the abilityto stimulate incorporation of tritiated thymidine into DNA inNIH 3T3 fibroblasts transfected with the human IGF-I receptor.Cleavage also restored metabolic capacity, as measured by theability of the isomers to promote lipogenesis in isolated ratadipocytes through the insulin receptor. These results are consistentwith the theory that binding of IGF-I to the IGF-I receptorrequires a conformational change similar to that involved ininsulin binding the insulin receptor. The weak affinity forthe IGF-I receptor after cleavage is consistent with the beliefthat residues in the C-region interact with the IGF-I receptor.This structural difference between insulin and IGF-I gives eacha higher binding affinity for its own receptor.     

Nitrogen budget for fescue pastures fertilized with broiler litter in Major Land Resource Areas of the southeastern US

The southeast US produces a tremendous number of broiler chickens (Gallus gallus), which in turn produce massive quantities of litter (manure and bedding materials). In the Southeast, litter is most often disposed of via land application to pastures, however, the ultimate fate of much of the applied nitrogen (N) is not known. We have constructed N budgets for three sites across the southeastern U.S. in an effort to determine how much of the applied N is useful for plant production and how much is left to be absorbed by the environment. Study sites were located in the Coastal Plain (Alabama), Piedmont (Georgia), and Cumberland Plateau (Tennessee) Major Land Resource Areas (MLRA) of the southeastern US. Litter was applied in the Spring of two consecutive years at a rate to supply 70 kg of available N ha^–1. The total amount of N applied ranged from 103 to 252 kg N ha^–1 depending on site and year. Nitrogen fluxes monitored in this study were broiler litter N, ammonia (NH₃) volatilization, denitrification, plant uptake, and leaching. Plant uptake represented the largest flux of applied N, averaging 43% of applied N. Losses due to NH₃ volatilization and denitrification combined were only 6% of applied N on average. Loss of N due to NO₃-N leaching appeared to be significant only at the Coastal Plain site where NO₃-N concentrations in the groundwater peaked at 38 mg N l^–1. We believe the majority of excess N shown in these budgets is likely accounted for by leaching losses and soil accumulation. Regardless of these assumptions and low gaseous losses, it is apparent that on average, 57% of applied N is destined for a fate other than plant uptake. The results of this study indicate that land-application of broiler litter at currently recommended rates has the potential for negative impacts on the environment of the southeastern U.S. in the long-term.     

Effects of Enantiomeric Blend of Verbenone on Response ofIps paraconfusus to Naturally Produced Aggregation Pheromone in the Laboratory

The aggregation pheromone produced by maleIps paraconfusus (Coleoptera: Scolytidae) tunneling in Monterey pine,Pinus radiata, logs was trapped on Porapak Q. A concentration of an extract of trapped volatiles that attracted beetles was determined in the laboratory through a concentration–response analysis of walking behavior of males and females. The interruptant effects of four concentrations of verbenone on response to a constant concentration of this naturally produced aggregation pheromone were tested with males and females. Independent of its enantiomeric composition [99.5% (S)-(–), 93.1 % (S)-(–), and 98.3% (R)-(+)], verbenone significantly reduced the percentage of females (but not males) reaching the attractant source. However, when the time required for beetles of both sexes taken together to reach the attractant source was considered, verbenone of higher enantiomeric purity had a greater effect on beetle behavior. Solutions of 99.5% (S)-(–)- and 98.3% (R)-(+)-verbenone increased the time required for beetles to reach the attractive source when compared to 93.1% (S)-(–)-verbenone. When pooled across enantiomeric blends, increasing concentrations of verbenone resulted in slower responses in beetles that reached the attractant source within 2 min. Males and females did not respond to verbenone alone.     

Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP

Processing lithium-ion battery (LIB) electrode dispersions with water as the solvent during primary drying offers many advantages over N-methylpyrrolidone (NMP). An in-depth analysis of the comparative drying costs of LIB electrodes is discussed for both NMP- and water-based dispersion processing in terms of battery pack $/kWh. Electrode coating manufacturing and capital equipment cost savings are compared for water vs. conventional NMP organic solvent processing. A major finding of this work is that the total electrode manufacturing costs, whether water- or NMP-based, contribute about 8–9% of the total pack cost. However, it was found that up to a 2?×?reduction in electrode processing (drying and solvent recovery) cost can be expected along with a $3–6?M savings in associated plant capital equipment (for a plant producing 100,000 10-kWh Plug-in Hybrid Electric Vehicle (PHEV) batteries) using water as the electrode solvent. This paper shows a different perspective in that the most important benefits of aqueous electrode processing actually revolve around capital equipment savings and environmental stewardship and not processing cost savings.     

Effect of montmorillonite clay addition on the morphological and physical properties of Jatropha curcas L. and Glycine max L. protein concentrate films

Protein concentrates from jatropha (JPC) and soy seeds (SPC) were obtained by solubilization and acid precipitation of proteins. JPC and SPC films were prepared by the casting method, using two different montmorillonite (MMT) clay concentrations and plasticized with glycerol. Film properties were evaluated by scanning electron microscopy, transmission electron microscopy, X‐ray diffraction (XRD), Fourier transform infrared spectroscopy, thermogravimetric analysis, tensile properties, water retention, and water vapor transmission rate (WVRT). Typical tactoid microcomposite structures were found to be heterogeneously dispersed in the films containing MMT. A small XRD peak was found in films with MMT. Slight improvements in thermal stability and tensile strength were observed in the films with MMT. Reductions in water retention and WVRT were obtained when MMT was added into the films. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44459.     

A Blend of Ethanol and (−)-α-Pinene were Highly Attractive to Native Siricid Woodwasps (Siricidae,Siricinae) Infesting Conifers of the Sierra Nevada and the Allegheny Mountains

Woodwasps in Sirex and related genera are well-represented in North American conifer forests, but the chemical ecology of native woodwasps is limited to a few studies demonstrating their attraction to volatile host tree compounds, primarily monoterpene hydrocarbons and monoterpene alcohols. Thus, we systematically investigated woodwasp-host chemical interactions in California’s Sierra Nevada and West Virginia’s Allegheny Mountains. We first tested common conifer monoterpene hydrocarbons and found that (?)-α-pinene, (+)-3-carene, and (?)-β-pinene were the three most attractive compounds. Based on these results and those of earlier studies, we further tested three monoterpene hydrocarbons and four monoterpene alcohols along with ethanol in California: monoterpene hydrocarbons caught 72.3% of all woodwasps. Among monoterpene hydrocarbons, (+)-3-carene was the most attractive followed by (?)-β-pinene and (?)-α-pinene. Among alcohols, ethanol was the most attractive, catching 41.4% of woodwasps trapped. Subsequent tests were done with fewer selected compounds, including ethanol, 3-carene, and ethanol plus (?)-α-pinene in both Sierra Nevada and Allegheny Mountains. In both locations, ethanol plus (?)-α-pinene caught more woodwasps than other treatments. We discussed the implications of these results for understanding the chemical ecology of native woodwasps and invasive Sirex noctilio in North America. In California, 749 woodwasps were caught, representing five species: Sirex areolatus Cresson, Sirex behrensii Cresson, Sirex cyaneus Fabricius, Sirex longicauda Middlekauff, and Urocerus californicus Norton. In West Virginia 411 woodwasps were caught representing four species: Sirex edwardsii Brullé, Tremex columba Linnaeus, Sirex nigricornis F., and Urocerus cressoni Norton.     

Increasing Volumetric CO2 Uptake of Hypercrosslinked Polymers through Composite Formation

To overcome the drawbacks of solid microporous materials for CO₂ capture, this proof‐of‐concept study demonstrates a low‐cost and rapid method for producing composites consisting of hypercrosslinked polymers (HCP) with a polyethyleneimine (PEI) binder. The resulting materials capture CO₂ through physical and chemical absorption simultaneously. Compared with HCP, the composites exhibit higher CO₂ uptake, higher volumetric density, and improved tolerance to water which is attributed to the PEI binder.     

Analytical solution of the tooling/workpiece contact interface shape during a flow forming operation

Flow forming involves complicated tooling/workpiece interactions. Purely analytical models of the tool contact area are difficult to formulate, resulting in numerical approaches that are case-specific. Provided are the details of an analytical model that describes the steady-state tooling/workpiece contact area allowing for easy modification of the dominant geometric variables. The assumptions made in formulating this analytical model are validated with experimental results attained from physical modelling. The analysis procedure can be extended to other rotary forming operations such as metal spinning, shear forming, thread rolling and crankshaft fillet rolling.     

Influence of Fluorine Content in Apatite–Mullite Glass-Ceramics

The nucleation and crystallization of a series of glasses based on 4.5SiO₂·3Al₂O₃·1.5P₂O₅·(5 − z )CaO · z CaF₂ with a Ca:P ratio corresponding to apatite were studied. In these glasses, the objective was to investigate the influence of fluorine content and z was varied from 3 to 0. All the glasses studied crystallized to fluorapatite (FAP) and mullite with the exception of the glass containing no fluorine, which crystallized to β-tricalcium phosphate (Ca₃(PO₄)₂) and anorthite (CaAl₂Si₂O₈). Glasses that contained sufficient fluorine to form FAP bulk nucleated to give FAP without a nucleation hold. Thermal gravimetric analysis demonstrated a significant weight loss corresponding to the crystallization of mullite, which increased with the fluorine content of the glass and also with decreased particle size. The loss was attributed to volatile SiF₄. The glass transition temperature decreased with increased fluorine content of the glass.