ATMOSPHERIC DEPOSITION OF CHEMICAL SPECIES TO POLAR SNOW

Particles and gases can deposit from the atmosphere to polar snow by several mechanisms. Dry deposition can be considered to consist of three steps: aerodynamic transport from the free atmosphere to the viscous sublayer near the surface, boundary layer transport across the sublayer, and interactions with the surface. The particle dry deposition mass flux is dominated by the largest particles present in a size distribution. Wet deposition includes in-cloud and below-cloud scavenging, where the former refers to uptake of particles during nucleation of cloudwater as well as scavenging of particles and gases by existing droplets and ice crystals. Of all the wet deposition mechanisms, nucleation scavenging is often the most important mechanism for particles in the polar regions. Finally, incorporation of particles and gases into fog droplets and subsequent settling of the fog to the snow surface can be an important removal process in regions of frequent fog. For Summit, Greenland, the total deposition of MSA, SO₄^2-, Na⁺, K⁺, and Ca²⁺ during May 24-July 13, 1993 was dominated by wet deposition: this mechanism accounted for an average of 62% of the total deposition for these species. Fog and dry deposition accounted for 21% and 17% of the total, respectively. These results suggest that all three mechanisms may need to be considered when estimating total deposition of certain chemical species to polar snow.     

Suppressive effect of corticosteroids on the gene expression of interleukin-5 and eosinophil activation in asthmatics

Although cortico steroids are effective anti-inflammatory agents in ameliorating asthma symptoms and bronchial hperreactivity, their mechanism of action is unknown. Interleukin (IL)-5 is known to play a key role in regulating eosinophil proliferation and activation. Therefore, we examined the changes of IL-5 mRNA expressions in PBMC semi-quantitatively with RT-PCR as well as serum ECP levels and MCH-PC20 values in asthmatics before and after being treated with corticosteroids. The results revealed that there were significant decrease in the level of IL-5 mRNA and serum ECP concentration after therapy (P < 0.05) and there was remarkable improvement in the values of MCH-PC20 and FEV1% (P < 0.05). It was also found that the changes of serum ECP levels or MCH-PC20 values were accompanied by a reduction in IL-5 mRNA expression (r = 0.5426 or 0.4857, P < 0.05). These results suggested that the therapeutic effects of corticosteroids in asthma may result from modulation of IL-5 gene expression with consequent inhibition of eosinophil activation.     

Tenascin-C and the development of articular cartilage

In comparison to the vast literature on articular cartilage structure and function, relatively little is known about how articular cartilage forms during embryogenesis and is endowed with unique phenotypic properties, most notably the ability to persist and function throughout postnatal life. In this minireview, we summarize recent studies from our laboratory suggesting that the extracellular matrix protein tenascin-C is involved in the genesis and function of articular chondrocytes. These and other data have led us to propose that tenascin-C may be part of in vivo mechanisms whereby articular chondrocytes develop at the epiphysis of long bone models, remain functional throughout postnatal life, and avoid the endochondral ossification process undertaken by the bulk of chondrocytes located in the metaphysis and diaphysis of skeletal models.     

The effects of growth hormone in children with a GH deficiency: a report of 5 cases

The authors describe 5 cases, 3 boys and 2 girls, with idiopathic growth hormone deficiency in prepubertal age, treated with human growth hormone. In four of five cases the response to treatment with GH was relevant. Only in one case (F1) the response was negative. The results of this study confirm that rhGH is a safe and effective therapy in children with GHD.     

Diffusion bonding of ferritic oxide dispersion strengthened alloys to austenitic superalloys

The superior high temperature mechanical strength and oxidation resistance of ferritic oxide dispersion strengthened (ODS) tubular alloys are compromised by the difficulties encountered in joining. Conventional fusion welding techniques generate a weld fusion zone which is devoid of the mechanical strength exhibited by the base material. Therefore, more sophisticated solid state joining techniques, such as diffusion bonding, must be employed when joining ODS materials. This paper describes a series of solid state diffusion bonding experiments carried out between two tubular ferritic ODS alloys and two high temperature austenitic alloys. Careful control of bonding conditions produced pressure retaining joints between one of the tubular ODS alloys and both austenitic alloys. The successful joint design was incorporated into the manufacture of a tubular creep component, which enabled a series of internally pressurized creep tests to be carried out. The microstructure developed at the bond interface of each of the four separate material couples is described and the high temperature performance of the pressure retaining joints is discussed.     

Interpolated smoothed pseudo Wigner-Ville distribution for accuratespectrum analysis

This paper deals with a new application of the time-domain windowed (smoothed version) of the pseudo Wigner-Ville distribution (PWD), that can be easily implemented in a dedicate digital instrument to be used as a spectral analyzer for time-frequency analysis of nonstationary signals. New computational algorithms are studied and developed to attain high time-frequency resolution, accuracy, flexibility and computational efficiency. Particularly, to reduce the negative effects due to leakage during frequency changes, a new interpolation formula is derived by using the windowing theory. The suggested technique allows the users to perform optimal evaluations of the instantaneous amplitudes and frequencies of analyzed signals     

Behavior of a vibrating wire near the liquid3He-vacuum interface and in a saturated3He-4He mixture

In this paper we describe the effect of the vicinity of a liquid³He-vacuum interface on the behavior of a vibrating wire viscometer. It was found that in the fluid near the liquid interface the quality factor is lower than in the bulk liquid. We further report on the observation of a doubling of the resonance peak of the wire in a saturated³He-⁴He mixture. The frequencies and amplitudes of the two peaks strongly depend on the distance between the phase boundary and the vibrating wire; the temperature and the velocity of the phase boundary have no significant influence on the peak frequencies. The observed peak doubling is attributed to the coupling of the vibrating wire with a standing second-sound wave in the dilute phase where the volume of the dilute phase can be regarded as a resonating cavity for second sound.     

Microstructure and mechanical behaviour of 3Y-TZP/Mo nanocomposites possessing a novel interpenetrated intragranular microstructure

Yttria stabilized tetragonal zirconia polycrystal (Y-TZP)/0-100 vol % molybdenum (Mo) composites were fabricated by hot-pressing a mixture of Y-TZP powder containing 3 mol % yttria (Y₂O₃) and a fine Mo powder in vacuum. This composite system possessed a novel microstructural feature composed of an interpenetrated intragranular nanostructure, in which either nanometer sized Mo particles or equivalent sized zirconia (ZrO₂) particles located within the ZrO₂ grains or Mo grains, respectively. The strength and toughness were both greatly enhanced with increasing Mo content for the 3Y-TZP/Mo composites thus breaking through the strength-toughness tradeoff relation in transformation toughened ZrO₂ and its composite materials. They exhibited a maximum strength of 2100 MPa and a toughness of 11.4 MPa·m^1/2 for the composite containing 70 vol % Mo. These simultaneous improvements in strength and toughness were determined to be the result of a decrease in flaw size associated with the interpenetrated intragranular nanostructure, and a stress shielding effect created in the crack tip by the elongated Mo polycrystals bridging the crack tip in addition to the stress induced phase transformation.     

The use of stokeslets to describe the arbitrary translation of a disk near a plane wall

A previously presented method is extended to describe the fully three-dimensional Stokes flow generated by the translation in any direction of an arbitrarily oriented disk in fluid bounded by a plane wall. The velocity field is represented solely in terms of stokeslet distributions on the disk, modified to take account of the bounding wall according to the century-old idea of Lorentz. Sets of integral equations of the second kind, not all disjoint, are obtained for the Abel transforms in each Fourier mode of the density functions. However, only a few modes need be considered in determining the flow field to order D ^-3, where D is the distance of the disk axis from the wall. Less detail is required to evaluate the drag force and torque experienced by the disk.