In Situ ceramic particle-reinforced aluminum matrix composites fabricated by reaction pressing in the TiO2 (Ti)-Al-B (B2O3) systems

Particulate TiB₂ reinforced aluminum-based metal matrix composites (MMCs) were successfully fabricated by means of the reaction processing method. TiB₂ particulates were formed in situ through the reaction of Ti and B in Ti-Al-B, TiO₂ and B in TiO₂-Al-B, and TiO₂ and B₂O₃ in TiO₂-Al-B₂O₃ systems. The results showed that in situ TiB₂ particulates formed in the Ti-Al-B system had a size of 5 μm and they exhibited block and rodlike structures. Moreover, coarse Al₃Ti blocks several tens of micrometers in size were also formed simultaneously. On the other hand, equiaxed Al₂O₃ and TiB₂ particulates with a size of less than 2 μm were formed in situ in the TiO₂-Al-B and TiO₂-Al-B₂O₃ systems. The Al₃Ti phase was completely eliminated in the TiO₂-Al-B system with increasing B content. Tensile tests revealed that the Al₂O₃ · TiB₂/Al composite fabricated from the TiO₂-Al-B system exhibits excellent mechanical properties. The yield strength of the Al₂O₃ · TiB₂/Al composite appeared to increase with increasing TiB₂ content. The yield strength of the Al₂O₃ · TiB₂/Al composite could be further increased by introducing CuO into the TiO₂-Al-B system. Such an increment in mechanical strength arose from the strengthening effect caused by the Al₂Cu precipitates. The incorporation of CuO had no effect on the in situ reaction process of the TiO₂-Al-B system. Finally, the effect of SiC addition on the microstructure and mechanical properties of the composites fabricated from the TiO₂-Al-B and TiO₂-Al-B-CuO systems was also investigated.     

Neural mechanism of pupillary dilation elicited by electro-acupuncture stimulation in anesthetized rats

The neural mechanisms to reflex dilation elicited by electro-acupuncture stimulation were investigated in anesthetized rats. Two needles, with 160 microns diameter and about 5 mm apart, were inserted into the skin and underlying muscle of a hindpaw. Repetitive 20 Hz, 0.5 ms electrical pulses at various intensities were used for stimulation for 30s. The pupil size was magnified about 44 times via a microscope and was continuously recorded on a videotape. Electro-acupuncture stimulation at more than 0.5 up to 6 mA induced stimulus intensity-dependent pupil dilation. These responses were abolished by the severance of the sciatic and saphenous nerve of the stimulated hindlimb. Compound action potentials were recorded from the distal cut end of the tibial of a saphenous nerve following electro-acupuncture stimulation of the hindpaw. The mean threshold of the compound action potentials of the myelinated fibers in saphenous nerves was 0.18 mA, while that of unmyelinated fibers was 3.0 mA. The mean threshold of the compound action potentials of the myelinated fibers in the tibial nerve was 0.20 mA of unmyelinated fibers was 3.3 mA. Severance of bilateral trunks did not affect the response, while severance of the third cranial nerves abolished the responses. In conclusion, electro-acupuncture stimulation applied to the hindpaws of the anesthetized rats induced excitation of myelinated or of both myelinated and unmyelinated afferent fibers of the tibial and saphenous nerve, and involved a reflex response of pupil dilation through the third cranial parasympathetic efferent nerve.     

Transmission capacity of optical path overhead transfer schemeusing pilot tone for optical path network

Photonic networks based on the optical path concept and wavelength division multiplexing (WDM) technology require unique operation, administration, and maintenance (OAM) functions. In order to realize the required OAM functions, the optical path network must support an effective management information transfer method. The method that superimposes a pilot tone on the optical signal appears very interesting for optical path overhead transfer. The pilot tone transmission capacity is determined by the carrier to noise ratio which depends on the power spectral density of the optical signal. The pilot tone transmission capacity of an optical path network employing WDM technology is elucidated; 4.5 kb/s transmission can be realized when the pilot tone modulation index is set at 3%     

On the reliability of Landsat TM for estimating forest variables byregression techniques: a methodological analysis

In order to build models that relate thematic mapper (TM) imagery to field forest variables, several regression techniques, such as the ones based on the Mallows' C_p and the adjusted R² statistics, were applied. Nevertheless, although the best created models had good fittings (R²>0.65) apparently supported by a clear statistical significance (p<0.0001), later trials tested with additional plots showed that these models were, in fact, nonrobust models (models with very low-predictive capabilities). Two factors were pointed out as causes of these inconsistencies between predicted and observed values: a relatively small number of available field plots and a relatively high number of possible independent variables. Actually, different trials suggested much lower fittings for the expected “really” predictive models. Some restrictions of TM satellite data, such as its radiometric, spectral, and spatial limitations, together with restrictions arising from gathering and processing of field data, might have led to these poor relations. This study shows the need for guarantees stronger than the usual ones before concluding that there is a clear possibility of using satellite information to estimate forest parameters by means of regression techniques     

氧化铝陶瓷缺口件循环疲劳及断裂机理

用实验方法研究了Ａｌ＿２Ｏ＿３陶瓷缺口试件在循环载荷作用下的疲劳寿命。结果表明，缺口导致的应力集中效应显著降低了循环疲劳寿命；若用缺口根部最大应力为应力水平，则不同缺口半径陶瓷试件具有相同疲劳断裂规律，说明陶瓷材料的疲劳集中系数和理论应力集中系数相同。本文还分析讨论了陶瓷材料的循环疲劳寿命表达式和循环疲劳断裂机理。     

一种基于三次样条函数求离子浓度的自动算法

本文提出了一种用三次样条函数模拟双次标准加入法测量方程，直接求解离子浓度的自动算法。比较了三咱不同边界条件下用要池数计算离子浓度的结果。造出节点区间两极端点的二阶导数为零时的三次样条函数为最佳模拟函数。并讨论了该方法在实际分析中误差的来源及消除办法。经对一系列文献数据的验算对比，表明本法完全可代替传统的迭代法和查图法，且能方便地设置在智能化的电位分析系统中。     

Hierarchical models for analysis and recognition of handwritten characters

Different hierarchical models in pattern analysis and recognition are proposed, based on occurrence probability of patterns. As an important application of recognizing handprinted characters, three typical kinds of hierarchical models such asM _89-89,M _89-36 andM _36-36 have been presented, accompanied by the computer algorithms for computing recognition rates of pattern parts. Moreover, a comparative study of their recognition rates has been conducted theoretically; and numerical experiments have been carried out to verify the analytical conclusions made. Various hierarchical models deliberated in this paper can provide users more or better choices of pattern models in practical application, and lead to a uniform computational scheme (or code). The recognition rates of parts can be improved remarkably by a suitable hierarchical model. For the modelM _89-36 in which case some of the Canadian standard handprinted characters have multiple occurrence probabilities, the total mean recognition rates of the given sample may reach 120% of that by the model proposed by Li et al., and 156% of that obtained from the subjective experiments reported by Suen.     

Second-order bounds on the domain of attraction and the rate ofconvergence of nonlinear dynamical systems and neural networks

We present a method for analyzing the convergence properties of nonlinear dynamical systems yielding second-order bounds on the domain of attraction of an asymptotically stable equilibrium point and on the time of convergence in the estimated domain. We show that under certain conditions on the system, there exists an analytic solution to the corresponding optimization problem. The method is applied in analyzing the dynamics of a neural network model.     

Analytical formulae for calculating stresses in unidirectional/cross-ply unbalanced laminates

A multilayer theory has been developed for unidirectional/cross-ply unbalanced laminates subjected to surface shear tractions, using the assumption of plane strain. The analytical solution for the stress field in the laminate is obtained and it is shown that the stresses in each layer are in good agreement with the results of a three-dimensional finite element analysis. Approximate formulae for the analytical stresses are also derived for a laminate subjected to an offset distributed force at one end. The accuracy of this solution is shown by comparison with a three-dimensional finite element analysis.     

Serotype-specific amplification of Rickettsia tsutsugamushi DNA by nested polymerase chain reaction

Polymerase chain reaction (PCR) with nested primer pairs was used to diagnose scrub typhus and identify the Rickettsia tsutsugamushi serotype. The primer pairs used for PCR were designed on the basis of the nucleotide sequence of the gene that encodes the 56-kDa antigen. Serotype-specific primers were used in the second PCR amplification. Five serovariants, the Gilliam, Karp, Kato, Kawasaki, and Kuroki strains of R. tsutsugamushi, were identified by nested PCR. In addition, the serotype identified by PCR with DNA from blood clots was the same as that of the strain isolated from five patients with scrub typhus. These findings indicate that this method is useful for diagnosis and identification of the rickettsial serotype in infected patients.