Critical Review of Fluorinated Electrolytes for High-Performance Lithium Metal Batteries

Lithium metal batteries (LMBs), due to their ultra-high energy density, are attracting tremendous attentions. However, their commercial application is severely impeded by poor safety and unsatisfactory cycling stability, which are induced by lithium dendrites, side reactions, and inferior anodic stability. Electrolytes, as the indispensable and necessary components in lithium metal batteries, play a crucial role in regulating the electrochemical performance of LMBs. Recently, the fluorinated electrolytes are widely investigated in high-performance LMBs. Thus, the design strategies of fluorinated electrolytes are thoroughly summarized, including fluorinated salts, fluorinated solvents, and fluorinated additives in LMBs, and insights of the fluorinated components in suppressing lithium dendrites, improving anodic stability and cycling stability. Finally, an outlook with several design strategies and challenges will be proposed for novel fluorinated electrolytes.     

Design of a 2-DOF-PID controller using an improved sine–cosine algorithm for load frequency control of a three-area system with nonlinearities

This paper proposes an improved sine–cosine algorithm (ISCA) based 2-DOF-PID controller for load frequency control. A three-area test system is built for study, while some physical constraints (nonlinearities) are considered for the investigation of a realistic power system. The proposed method is used as the parameter optimizer of the LFC controller in different scenarios. The 2-DOF-PID controllers are used because of their capability of fast disturbance rejection without significant increase of overshoot in set-point tracking. The 2-DOF-PID controllers’ efficacy is observed by examining the responses with the outcomes obtained with PID and FOPID controllers. The simulation results with the suggested scheme are correlated with some of the existing algorithms, such as SCA, SSA, ALO, and PSO in three different scenarios, i.e., a disturbance in two areas, in three areas, and in the presence of physical constraints. In addition, the study is extended to a four-area power system. Statistical analysis is performed using the Wilcoxon Sign Rank Test (WSRT) on 20 independent runs. This confirms the supremacy of the proposed method.     

高性能罗兰-C接收天线设计

为了提高罗兰-C磁天线的接收能力,设计了一种顺接串联多层线圈的磁天线。理论推导了顺接串联多层线圈磁天线的信噪比和灵敏度,最终设计的磁天线大小为150 mm×150 mm。远场测试接收到了较高信噪比的罗兰-C信号,在相同信号调理电路条件下,与单层单组线圈的磁天线相比,顺接串联多层线圈的磁天线接收到3.47 V的电压信号,且信噪比高达30.87 dB,灵敏度和信噪比分别提高了82.42%和63.20%。顺接串联多层线圈磁天线提高了罗兰-C磁天线的灵敏度和信噪比,对罗兰-C系统在定位方面的应用具有重要意义。     

Designing Metallic and Insulating Nanocrystal Heterostructures to Fabricate Highly Sensitive and Solution Processed Strain Gauges for Wearable Sensors

All‐solution processed, high‐performance wearable strain sensors are demonstrated using heterostructure nanocrystal (NC) solids. By incorporating insulating artificial atoms of CdSe quantum dot NCs into metallic artificial atoms of Au NC thin film matrix, metal–insulator heterostructures are designed. This hybrid structure results in a shift close to the percolation threshold, modifying the charge transport mechanism and enhancing sensitivity in accordance with the site percolation theory. The number of electrical pathways is also manipulated by creating nanocracks to further increase its sensitivity, inspired from the bond percolation theory. The combination of the two strategies achieves gauge factor up to 5045, the highest sensitivity recorded among NC‐based strain gauges. These strain sensors show high reliability, durability, frequency stability, and negligible hysteresis. The fundamental charge transport behavior of these NC solids is investigated and the combined site and bond percolation theory is developed to illuminate the origin of their enhanced sensitivity. Finally, all NC‐based and solution‐processed strain gauge sensor arrays are fabricated, which effectively measure the motion of each finger joint, the pulse of heart rate, and the movement of vocal cords of human. This work provides a pathway for designing low‐cost and high‐performance electronic skin or wearable devices.     

数控机床操控器人机界面优化设计研究

目的控制器和显示器共同组成数控机床控制面板的整体界面,是机床接受与执行命令的交互平台。从人机交互角度,聚焦于控制器的界面布局进行优化设计。方法基于人机工程学理论的优化流程,采用现场访谈、现场观察等方法,将人机工程学的理论转化为具体考核指标。结论从人机工程学的研究角度出发,结合工业设计、用户体验设计学等内容,从功能区域分区、操纵器色彩设计等方面优化数控机床控制器的界面,提高系统整体效能及使用者满意度,为数控机床系统开发设计提供参考。     

Peptidyl Virus-Like Nanovesicles as Reconfigurable “Trojan Horse” for Targeted siRNA Delivery and Synergistic Inhibition of Cancer Cells

The self-assembly of peptidyl virus-like nanovesicles (pVLNs) composed of highly ordered peptide bilayer membranes that encapsulate the small interfering RNA (siRNA) is reported. The targeting and enzyme-responsive sequences on the bilayer's surface allow the pVLNs to enter cancer cells with high efficiency and control the release of genetic drugs in response to the subcellular environment. By transforming its structure in response to the highly expressed enzyme matrix metalloproteinase 7 (MMP-7) in cancer cells, it helps the siRNA escape from the lysosomes, resulting in a final silencing efficiency of 92%. Moreover, the pVLNs can serve as reconfigurable “Trojan horse” by transforming into membranes triggered by the MMP-7 and disrupting the cytoplasmic structure, thereby achieving synergistic anticancer effects and 96% cancer cell mortality with little damage to normal cells. The pVLNs benefit from their biocompatibility, targeting, and enzyme responsiveness, making them a promising platform for gene therapy and anticancer therapy.     

Preparation of nanometre size oxide particles using filter expansion aerosol generator

Crystalline zinc oxide particles of nanometre size (< 20 nm) particles were produced from a zinc acetate solution by using a filter expansion aerosol generator (FEAG). The FEAG is an aerosol generator that is operated at 60 torr reactor pressure and produces droplets of around 2 m. The shape of the particles produced by the FEAG were distinctively different from those produced by the ultrasonic spray source (USS). Results from scanning electron microscopy (SEM) and X-ray diffractometry (XRD) indicated that crystalline zinc oxide particles of nanometre size were produced at 600 °C in 0.02 s residence time. Weight loss of these particles, determined by thermogravimetric analysis (TGA), was 3 wt%. Based on the morphology change as a function of the reactor temperature and solute concentration, we proposed that the nanometre particles were formed by uniform precipitation at the drying stage and decomposition followed by disintegration into nanometre particles. It was also shown that exothermic decomposition of the solute was not required for the disintegration of the primary particles in the FEAG process. This result opened up an opportunity for producing carbon-free nanometre particles from nitrate salts by using the FEAG.     

嵌入式系统芯片的软硬件协同仿真环境设计

针对嵌入式系统芯片SoC开发验证阶段的需求,介绍了一种通用的SoC软硬件协同仿真平台。软件仿真由C／C＋＋和汇编语言编写,硬件仿真基于VMM验证方法学所搭建,SoC设计代码由RTL代码编写而成。将SoC设计代码中的ARM由DSM模型替代,通过VCS编译器将软硬件协同起来进行信息交互,实现一种速度快、真实性高、调试方便的...     

基于SIMD结构的多标准LDPC译码器的VLSI实现

近年来,支持多标准的LDPC译码器已逐渐成为研究的热点.与传统译码器相比,所设计的LDPC译码器具有以下优点:1.实现了一个码率、码长可配置结构,进而可以支持多种标准;2.采用了一种改进型TPMP算法,使译码器的存储器容量大大减少,避免了因分块LDPC码的非规则性所造成的数据冲突问题;3.采用基于SIMD处理器的硬件结构,实现了硬件的高度规整性,易于芯片布局布线;4.设计了一个6级可配置流水线,可分时构造校验节点处理单元和变量节点处理单元,提高了硬件利用率和系统数据吞吐率.用这种架构实现了一个同时支持CMMB和DTMB两个标准的多标准LDPC译码器;芯片规模为75万门,时钟频率为220MHz,数据吞吐率为300Mbps.