基于TMS320C67xx DSP的软件开发及优化

本文介绍了TMS320C67xx的性能特点，给出了其程序开发流程，并详细讨论了常用的软件优化方法．这些方法有一定的工程应用价值。     

阿曼Daleel油田分支井钻井液技术研究

对Daleel油田作业5区三分支水平井DL-59井井下复杂情况分析,室内测定了引起复杂情况的Nahr Umr泥页岩地层的矿物组分和粘土矿物含量,优选了适应在该泥页岩地层215.9 mm造斜井段的钻井液配方中的各种处理剂,最后研制出钻井液配方,通过DL-73井应用后,取得了良好的防塌效果.     

一种高抗干扰的DSP输入输出信号传输电路的设计

介绍和比较了现有的DSP输入输出信号传输方法,设计了一种高抗干扰的DSP输入输出信号传输电路,论述了该电路工作原理,给出了电路主要参数的设计计算。通过实验验证了该传输电路的可行性。     

FFFIS编解码算法与实现

在对FFFIS(Form Fit Function Interface Specification)的Eurobalise报文特点进行简单介绍的基础上,对其编解码算法进行了探讨,并根据FFFIS标准提出了高速算法以及系统软硬件实现方案,最后对其应用进行了简单介绍。     

太钢3号卷取机TDC控制系统开发与应用

太钢热连轧厂3号卷取机改造前所采用的美国西屋公司WDPF控制系统已不能满足目前生产和质量的要求，进而应用西门子公司的TDC控制系统对其进行了改造。该项目的设计、编程、调试由太钢自行完成，改造中采用了带钢头部张力优化控制、夹送辊张力控制、卷取机平滑曲线减张控制、卸卷小车横移极限升降极限模拟控制等多项新技术。其改造后产品产量、综合成卷率和卷形良好率均明显提高。     

Luminescent Efficiency in Single-layer Organic Electrophosphorescent Devices

Based on the charge injection and recombination processes and the triplet-triplet annihilation process, a model to calculate the electro.luminescent（EL） efficiency is presented. The influences of the applied electric field on the injection efficiency, recombination efficiency and electroluminescent efficiency are discussed. It is found that： （1） The injection efficiency is increasing while the recombination efficiency is decreasing with the applied electric field increasing. （2） The EL efficiency is enhanced at low electric field slowly but is decreasing at high electric field with the increase of applied voltage. （3） The EL efficiency is decreasing with the increase of the host-guest molecular distance （R）. So, it is concluded that the EL efficiency in single-layer organic electrophosphorescent devices is dominated by injection efficiency at lower electric field and recombination efficiency at higher electric field.     

组态软件在应用中的功能扩展

在DDE动态数据交换基础上,采用本地以太网UDP用户数据报协议,解决了组态王不支持网络变量从本机输出的问题,完善了系统功能。     

浅析朱赛普·特拉尼的代表作法西斯大厦

介绍了法西斯大厦的基本情况，通过对朱赛普·特拉尼的代表作法西斯大厦的空间结构、承重结构、围护结构、立面结构的分析，以使人们更深刻地理解特拉尼的建筑思想，探索其积极的现实意义。     

TC-WⅢ舷外机专用油使用性能研究

简述水冷二冲程发动机油的发展趋势。通过研制油和参比油在60 hp水星舷外机的250 h系泊试验结果表明:大连TC-WⅢ舷外机油性能优良,完全可替代进口的TC-WⅢ舷外机油作为“为民”舷外机的专用润滑油。     

Investigation of the Microstructure of Rolled Semi—Solid Steel

In this paper,spring steel-60Si2Mn and stainless steel-1Cr18Ni9Ti were rolled one pass in semi-solid state.The microstructural evolution during rolling of the steels with different solid fraction was investigated.The experimental results showed that the manner of liquid and solid phases flowing and deforming was different.During rolling,most of solid phases remained in the center of the rolled specimens,while liquid phase flowed to the edge,which resulted in the macrosegregation of liquid and solid phases.Only the amount of solid fraction reached a certain value,were the solid phases deformed and flattened.