50W CO_2激光雕刻机控制系统

介绍非金属材料表面加工的CO2激光雕刻机的基本原理其控制系统。     

生态城市与水利现代化

对天津及其滨海新区生态城市水利建设进行了分析。研究了在淡水资源极度匮乏的条件下,有效开发利用非常规水资源的必要性、重要性和现实性。认为天津市对水资源应遵循节水、治污、高效配置,妥善处理生活、生产、生态之间的关系,力求平衡调配。供水水源应是多元的,增加非常规水资源(污水、海/咸水、雨/洪水)的利用,同时增加可用地下水,外调来水等,逐步进入可持续发展配置。     

薄相屏闪烁的数值分析

本文在弱闪烁条件下，利用广泛适用于星际闪烁、行星际闪烁和电离层闪烁的薄相屏理论，以行星际闪烁为算例，对薄相屏闪烁进行了数值分析。结果表明：垂直于介质运动方向上的不规则结构的大小对闪烁有着重要的影响，直接表现在频谱的变化趋势和振荡幅度的不同。尤其是当小于Ｆｒｅｓｎｅｌ尺度时，数值计算表明此时没有闪烁发生。     

提高振动放矿使用寿命的途径

振动放矿使用寿命的提高，是关系到该项技术能否进一步推广的关键，本文针对这一问题，着眼于实际存在的具体问题，结合多年的应用实践，分析了影响使用寿命的各种因素，按治本与治标相结合的原则，提出了提高使寿命的若干有效途径。     

3mm波段极近距离雷达

提出一种极近距离雷达概念，并导出其作用距离公式，在此基础上研制出一台３ｍｍ波段极近距离多普勒雷达样机．试验结果表明该雷达结构简单，成本低廉，在作用距离为零点几米至几米范围内可获得较高的定距精度．     

Microstructure study of Sm,Mn-modified PbTiO3 piezoelectric ceramics by XRD profile-fitting technique

By using the X-ray diffraction profile-fitting technique, the microstructures of Sm, Mn-modified PbTiO₃ piezoelectric ceramic discs, including ferroelectric domain sizes, microstrains, and their variations with the poling strength have been quantitatively investigated. The results manifest that the modified PbTiO₃ ceramics contain a high density of domain walls due to the presence of finely-divided coherent domain structures (tens of nanometres in dimension). The poling treament can evidently influence the domain-size distribution, with a more homogeneous microstructure being developed; however, it simultaneously causes high anisotropic microstrains within the structure which, together with the high density of domain walls, is expected to be responsible for the unusual high electromechanical coupling properties possessed by this material.     

用AIR-C2H2原子吸收光谱法测定镉镍电池正极浸渍液中钴含量

本文主要简述与运用AIR-C2H2原子吸收光谱法进行镉镍电池正极浸渍液中钴含量的测定，介绍了钴最佳测定条件及呈良好线性范围的浓度。同时对样品消化处理条件，在测定中样品的干扰因素进行了综合考虑，该方法具有很好的灵敏度，很好的重复性，干扰小，同时具有方法步骤简单，操作容易掌握等特点，对样品钴含量的测定，其相对标准偏差均小于1.0%（n=6），标准加入回收率均在97.0%～102.0%(n=5）范围内，结果表明，运用AIR-C2H2原子吸收光谱法测定镉镍电池正极浸渍液中钴含量的分析，达到了实验室分析质量控制的要求，完全适用于镉镍电池正极浸渍液中钴含量的控制分析和样品系统分析。     

Development of Bi(Pb)-2223/Ag pancake-shaped and solenoidal coils

High temperature superconducting (HTSC) multifilamentary (MT) Bi(Pb)-2223/Ag tapes with reproducible critical current density of between 15000 and 20000 A/cm² at 77 K in self field have been achieved using the standard flat-rolling method as the intermediate deformation between sintering periods. Long lengths of Bi(Pb)-2223/Ag MT tapes up to 43 m prepared by the conventional method of powder-in-tube (PIT) have been successfully produced on a laboratory scale. Several coils have been fabricated from sections of the long length tape, using the co-wound wind-and-react (W&R) procedure for the pancake-shaped and the singly-wound W&R as well as R&W procedure for the solenoidal coils. A novel W&R solenoidal coil (reaching ~973 ampere-turns) wound on an alumina ceramic tube generates a DC field of ~19 mT at 77 K and has been fabricated together with five pancake-shaped coils, each generating an average of ~5 mT at 77 K. These are destined for magnet construction with a possible combined calculated field of ~0.04 T at 77 K (with liquid nitrogen as a coolant)     

计算机在高炉鼓风机上的应用

本文介绍了捷克和斯洛伐克ＣＫＤ公司的ＭＡＲＫ工业控制计算机构成及其在高炉鼓风机控制系统中的应用，较详细地说明了高炉鼓风机的工艺控制思想。