Measurements of distribution of self-bias potential on an RF-plane electrode in plasma etching devices

The self-bias potential (V_dc) induced on an RF-powdered electrode (153 mm Ø) in a plasma is measured using electrical probes which are buried in, de-insulated from, and RF-connected to the electrode. The configuration of the probes allows to study the distribution of V_dc discretely on the electrode. The potential is homogeneous in the absence of external magnetic field. In the presence of a homogeneous magnetic field parallel to the electrode, it is reduced and a monotonous gradient takes place in its distribution due to the plasma shift induced by E × B drift. When the magnetic field is rotated along the axis of the RF-electrode at a frequency less than 50 Hz, the distribution, which is almost identical to the one in a static field, rotates with the magnetic field. On the coordinate system rotating with the magnetic field, the probes are regarded to be rotating. The potential distribution is obtained as a continuous function of the azimuthal angle. Thus the rotation of the field provides information for the experimental interpolation.     

Novel technique for SiO2 formed by liquid-phasedeposition for low-temperature processed polysilicon TFT

A technique for SiO₂ formation by liquid-phase deposition (LPD) at nearly room temperature for low-temperature processed (LTP) polysilicon thin-film transistor (poly-Si TFT) was developed. LPD SiO₂ film with a lower P-etch rate shows a dense structure. LPD SiO₂ also exhibits good electrical characteristics. LTP poly-Si thin-film transistors (TFTs) with LPD SiO ₂ as the gate insulator have been fabricated and investigated. Their characteristics indicate performance adequate for their use as pixel transistors in liquid crystal displays (LCDs)     

The importance of electrochemistry-related etching in thegate-groove fabrication for InAlAs/InGaAs HFETs

For the first time, the surface metal on nonalloyed ohmic electrodes is found to significantly change the profiles of gate grooves, when resist openings are employed to monitor drain current during wet-chemical gate recess for sub-micron InAlAs/lnGaAs heterojunction field-effect transistors (HFETs). The surface metal of Ni enhances the etching rate in comparison with that in the absence of electrodes by a factor of 4 and 10, laterally and vertically, which is favorable to fabricate deep gate grooves with small side etching. The Pt surface metal, however, leads to preferential etching of InGaAs over InAlAs, which can be useful to realize large side etching. The existence of an electrochemistry-related etching component, which arises when the ohmic electrodes are present during recess etching, is considered to be responsible for these behaviors     

Learning long-term dependencies with gradient descent is difficult

Recurrent neural networks can be used to map input sequences to output sequences, such as for recognition, production or prediction problems. However, practical difficulties have been reported in training recurrent neural networks to perform tasks in which the temporal contingencies present in the input/output sequences span long intervals. We show why gradient based learning algorithms face an increasingly difficult problem as the duration of the dependencies to be captured increases. These results expose a trade-off between efficient learning by gradient descent and latching on information for long periods. Based on an understanding of this problem, alternatives to standard gradient descent are considered.     

Leiomyomatosis peritonealis disseminata. Two case reports

AIM: To study the action of quercetin (Que) on inhibiting platelet aggregation. METHODS: Active oxygen free radicals produced by xanthine/xanthine oxidase (Xan/XO) reaction was used, platelet aggregation was determined by the turbidimetric method, and the Xan/XO oxyradicals generating reaction by luminol-dependent chemiluminescence (Che) method. RESULTS: Active oxygen free radicals enhanced the platelet aggregation induced by ADP 1.6 mumol.L-1. The rate of maximal aggregation increased from 29%-38% for ADP to 59%-70% for ADP + Xan/XO. The enhancement was abolished by the treatment of platelet-rich plasma (PRP) with Que 650 mumol.L-1 or hydrocortisone (Hyd) 900 mg.L-1. Both Que and Hyd scavenged the active oxyradicals in vitro. The Che was decreased by 75.7% (Que 4 mumol.L-1) and 79.0% (Hyd 900 mg.L-1) as compared with control. CONCLUSION: Active oxygen free radicals participated in the platelet aggregation, and scavenging oxyradicals by Que was one of mechanisms of inhibiting platelet aggregation.     

Introducing computer tools into a first course in electricalengineering

At a school where engineering students have immediate access to a personal computer, it is important that they become familiar with that tool early in their studies. In introductory engineering courses it is also important that the students learn to perceive the computer as a tool and not as an end in itself. Achieving these goals requires a careful integration of computer usage into such courses by the instructors. In this paper we examine this issue in the context of a first course in electrical engineering that has been taught at the US Naval Academy, and we present specific examples of assignments we have used in our effort to accomplish these goals     

DETERMINATION OF PALAEOSTRESSES FROM MESOSCALE SHEAR FRACTURES IN CORE SAMPLES USING THE MULTI-INVERSE METHOD

Palaeostress reconstruction is the key to quantitative characterization of fractured hydrocarbon reservoirs. In order to calculate the palaeostresses responsible for fault activity, faults in oriented core samples can be analysed and the optimal stresses can then be determined from fault-slip data in a least-squares sense. Many fractured reservoir rocks, however, include faults generated during a number of different tectonic phases. In these cases, the optimal stresses can be determined for subgroups of faults which are considered to be of approximately the same age. The difficulty with this is that criteria for accurate age-dating are often absent, especially from core samples.
Recently, the so-called "multi-inverse" method has been proposed to address this problem. This is a numerical technique for separating palaeostresses within a heterogeneous fault assemblage in the absence of a priori information on the faults'relative ages. In this paper, we apply the method to eighteen faults in two short (9m) cores from an exploration well in Hokkaido, northern Japan. The cores came from a fractured hydrocarbon reservoir and were oriented by correlation with borehole images. Core lithologies included massive Cretaceous basalts in which there was no layering which would show fault offsets; for these samples, we determined the sense of shear by studying asymmetric microstructures on the fault surfaces. The results show that the rocks have experienced six different stress regimes. In general, these are compatible with the tectonic history of the study area as inferred from the regional stratigraphy and from macroscale geological structures.
These results show that the multi-inverse method can be used to extract palaeostress data from cores, thereby providing information which will assist with the exploration of (and production from) fractured hydrocarbon reservoirs.     

New fault locating system for air-insulated substations usingoptical current detector

The authors present the basic philosophy, construction, design features, and test results of a new fault locating system. This fault locating system helps to shorten the time required for restoration of service after the occurrence of a busbar fault in an air-insulated distribution substation. Recent optical and electronic technologies allow the design of a highly accurate and compact fault locating system which consists of optical current detectors using the Faraday effect and a fault locating processor using a digital data processing technique. The fault location is carried out by discriminating between the directions of zero-sequence currents. Through various tests and field operations, it has been confirmed that the system has sufficient performance for practical applications