Adhesion strength of leadframe/EMC interfaces

Cu-based leadframe sheets were oxidized in alkaline solutions to produce brown and/or black oxide on the surfaces, and molded with epoxy molding compound (EMC). The adhesion strength of leadframe/EMC interface was measured using sandwiched double-cantilever beam (SDCB) specimens and pull-out specimens. Results showed that the adhesion strength of leadframe/EMC interface was inherently very poor but could be increased drastically with the nucleation of acicular CuO precipitates. The presence of smooth-faceted Cu₂O on the surface of the leadframe gave close to zero fracture toughness (G_C) and suitable pull strength (PS). A direct correlation between G_C and PS showed that PS can be a measure of G_C only in a limited range.     

Stacking number dependence of size distribution of vertically stacked InAs/GaAs quantum dots

Vertically stacked layer structure is useful for controlling the size distribution of quantum dots. The dependence of the size distribution of quantum dots on the stacking numbers is theoretically and experimentally investigated. We show that the size distribution of quantum dots decreases with increasing the stacking number, and it occurs drastically when the stacking number is changed from 1 to 2. The quantitative analysis on in-plane strain energy distribution is also performed for the explanation.     

Low-Power Parallel Video Compression Architecture for a Single-Chip Digital CMOS Camera

A low-power, large-scale parallel video compression architecture for a single-chip digital CMOS camera is discussed in this paper. This architecture is designed for highly computationally intensive image and video processing tasks necessary to support video compression. Two designs of this architecture, an MPEG2 encoder and a DV encoder, are presented. At an image resolution of 640 × 480 pixels (MPEG2) and 720 × 576 (DV) and a frame rate of 25 to 30 frames per second, a computational throughput of up to 1.8 billion operations per second (BOPS) is required. This is supported in the proposed architecture using a 40 MHz clock and an array of 40 to 45 parallel processors implemented in a 0.2 m CMOS technology and with a 1.5 V supply voltage. Power consumption is significantly reduced through the single-chip integration of the CMOS photo sensors, the embedded DRAM technology, and the proposed pipelined parallel processors. The parallel processors consume approximately 45 mW of power resulting a power efficiency of 40 BOPS/W.     

Time-frequency MEG-MUSIC algorithm

We propose a method that incorporates the time-frequency characteristics of neural sources into magnetoencephalographic (MEG) source estimation. The method is based on the multiple-signal-classification (MUSIC) algorithm and it calculates a time--frequency matrix in which diagonal and off-diagonal terms are the auto and crosstime--frequency distributions of multichannel MEG recordings, respectively. The method averages this time-frequency matrix over the time--frequency region of interest. The locations of neural sources are then estimated by checking the orthogonality between the noise subspace of this averaged matrix and the sensor lead field. Accordingly, the method allows us to estimate the locations of neural sources from each time--frequency component. A computer simulation was performed to test the validity of the proposed method, and the results demonstrate its effectiveness.     

Co-channel interference in high capacity fixed wireless loops (FWL)

The importance of the incident power density pattern (IPDP) for future fixed wireless loop (FWL) systems is discussed. Also an investigation into some of the important S/I implications of the IPDP for proper system capacity simulations is presented     

Transverse optical mode patterns for an RF excited Ar-He-Xe laser

Transverse optical modes for an RF excited Ar-He-Xe laser are studied both experimentally and theoretically. A diffraction model for a waveguide with a nonsaturable gain and refractive index gradients placed between two plane mirrors is formulated. The effects of gain and diffraction index gradients and of diffraction in free space are evaluated for typical experimental conditions. A direct comparison between theoretical mode patterns and experimentally measured ones at distances of 17 and 114 cm from the output mirror demonstrated a satisfactory agreement for various laser wavelengths and gas mixture compositions     

Extreme timing jitter reduction of a passively mode-locked laserdiode by optical pulse injection

Reduction of the timing jitter to less than that of the master laser pulses was achieved for a passively mode-locked laser diode stabilized by subharmonic-frequency optical pulse injection. Detailed investigation revealed that this phenomenon originates from the short-term stability of the mode locking frequency under passively mode-locking operation with suitable bias conditions of the saturable absorber and the gain sections     

Selective lasing of InGaAs quantum-wire array on a V-grooved GaAssubstrate by distributed optical feedback

Distributed-feedback (DFB) lasers were fabricated by using strained InGaAs quantum-wire (QWR) arrays on V-grooved GaAs substrates as an active grating. After characterizing the luminescence from the QWRs and parasitic quantum wells (QWLs), a DFB laser cavity incorporating such a QWR array with its emission wavelength matched to the Bragg wavelength was designed and fabricated. The wavelength selectivity of the DFB cavity was found to strongly support the QWR emission, and DFB lasing from QWR gain up to 145 K has been achieved under pulsed current. The emission from the parasitic QWLs was suppressed by the DFB filtering and the loss induced by coupling to radiation modes. The DFB cavity was shown to be essential for obtaining lasing from QWRs on V-grooved substrates     

The dynamic response analysis of a pyroelectric thin-film infraredsensor with thermal isolation improvement structure

Both theoretical and experimental studies of the substrate effect on the thermal behavior of a PbTiO₃ infrared (IR) sensor have been reported. With active cantilever dimensions of 200×100×5 μm³ formed by etching processes, the pyroelectric micro-electro-mechanical system (pyro/MEMS) structure exhibits a much superior performance to that of a traditional IR-sensing bulk structure under the 800-μW incident optical light with wavelength of 970 nm. Two-order improvement in current responsivity is obtained for the pyro/MEMS structure. This shows the substrate effect on the performance of a pyro/MEMS IR sensor is very significant. A simple model has also been proposed to illustrate the substrate effect more comprehensively     

钛宝石激光泵浦的1.06μm和1.34μm高效连续掺钕氟钒酸锶激光器

利用钛宝石激光作为泵浦源,实现了掺钕氟钡酸锶（ＮｄＳＶＡＰ）晶体在１．０６μｍ和１．３４μｍ的高效连续激光运转。在１．０６μｍ和１．３４μｍ处得到的最低泵浦阈值分别为２ｍＷ和２．４ｍＷ,最高斜效率分别为４９．４％和３７．４％,最大输出功率分别为３３６ｍＷ和１６５ｍＷ。