Epitaxial liftoff microcavities for 1.55-μm quantum-well spatiallight modulators

Microcavities operating at 1.55 μm have been realized according to the epitaxial liftoff (ELO) technique. The process is described and characterized. No significant variation of the optical properties of the grafted devices has been found. The technique is then applied to a spatial light modulator made by inserting a 3-μm multiple-quantum-well device in a short asymmetric Fabry-Perot microcavity. An enhancement by a factor 1000 of the performances of the switching component is obtained. The input diffraction efficiency reaches 2% in a degenerated four wave mixing configuration with a pulse energy of 1 μJ/cm² and without any applied electric field     

An efficient ATM voice service with flexible jitter and delayguarantees

A transmission and multiplexing strategy appropriate for voice over asynchronous transfer mode (ATM), called delayed frame queueing (DFQ), is proposed. This frame-based strategy has features in common with the synchronous transfer mode and is thus well suited to service synchronous applications such as voice, while retaining the statistical multiplexing capabilities of ATM. In particular, the DFQ service discipline can provide explicit and nontrivial bounds for queue delay and jitter, for both bursty as well as continuous traffic streams. Furthermore, the DFQ discipline can combine a wide range of delay and jitter bounds while also managing the distribution of quality of service violations among the traffic streams when congestion occurs. Jitter control is performed at the network periphery and thus does not negatively influence multiplexing gain at intermediate nodes. This efficient strategy has major implications in terms of the preferred alternatives chosen by clients when implementing source clock recovery for voice. DFQ allows the entire range of implementation alternatives for voice over ATM to be appropriately serviced, such as ATM adaptation layer types 1 and 2 (AAL1/2), adaptive playout, and immediate playout     

Multichannel transmission of a multicore fiber coupled withvertical-cavity surface-emitting lasers

A two-channel simultaneous transmission is experimented using direct coupling between a vertical-cavity surface-emitting laser (VCSEL) array and a novel 2×2 core optical fiber. No crosstalk is observed. Coupling efficiency and mechanical tolerance are good enough to envisage system applications     

基于SOPC的雷达脉冲周期的测量方法

讨论了双游标法在周期测量中的应用,并在QuartusⅡ开发平台上,以VHDL语言为主要输入语言,设计了基于SOPC技术的雷达脉冲周期测量模块,实现雷达脉冲周期的测量,在使用同频率晶振的条件下,应用双游标法提高了测量的精度.经实践检验,具有实际应用价值.     

A 1-V low power gain boosted self-cascoding current mirror operational transconductance amplifier

A low-voltage, micro-power, low-noise, high-gain, high-output swing current mirror-based operational transconductance amplifier (OTA) is presented. The proposed OTA achieves high DC gain and output swing by the adoption of gain boosted current mirroring and self-cascoding techniques. From the simulation, the proposed OTA implemented on a 0.18 μm CMOS shows the DC gain up to 90 dB with a gain bandwidth of 700 KHz for a load capacitor of 1 pF and an output voltage swing of 600 mV. The OTA dissipates only 750 nW from 1.0 V supply.     

Simple iterative receivers for MIMO LP-OFDM systems

In this paper,Lp-ofdm is combined with differentMimo schemes in order to improve performance in terms of diversity gain and to exploit capacity brought by theMimo channel. The original contribution is the development of a generic iterative receiver designed forLp mimo transmission able to work whatever the antenna configuration and the spatial coding scheme. By using a globalMmse criterion, interference terms coming from space-time coding and linear precoding are jointly treated leading to a very good trade-off between performance and complexity compared to trellis based detectors particularly for high order modulations, high number of antennas and/or large size of precoding matrices.     

An X-band high-efficiency MMIC power amplifier with 20-dBreturn losses

Describes the design principles and measured performance of an X-band high-efficiency monolithic-microwave-integrated-circuit (MMIC) power amplifier and discuss pertinent factors of the ion-implantation process. Also presented is a worst-case power prediction of the chip performance and a large-signal design using small-signal simulation. This balanced amplifier is fully monolithic with input and output return losses of better than 20 dB provided by Lange couplers. These return losses make it very convenient to cascade with other components. For high-efficiency operation, the drain voltage is 6 V. Across the 40% bandwidth from 8 to 12 GHz, the amplifier produces 1.6 to 2.1 W of output power at 33 to 40% power-added efficiency. For high-power operation, the drain voltage is 8.5 V. The amplifier can produce 2.4 to 2.8 W of output power at 26 to 29% power-added efficiency across the same 40% bandwidth     

高分辨力全向视觉系统的设计与实现

针对远距离的目标检测与跟踪,采用折反射成像方式,设计了一种高分辨力全向视觉系统.描述了折反射镜面的设计思路,对远距离目标的成像面积进行了分析,给出了需要的成像元件分辨力的计算方法,采用FPGA和DSP双核视频实时处理平台与CMOS图像传感器实现了高分辨力摄像机单元,并对FPGA和DSP之间的高速视频数据传输方式进行了分析.     

铝阳极氧化基板制备过程对埋置型Ta-N薄膜电阻的影响

在铝阳极氧化多层基板内用RF反应溅射制备了埋置型Ta-N薄膜电阻,研究了铝阳极氧化过程对Ta-N薄膜电阻和显微结构的影响.实验结果表明:Ta-N薄膜受上层多孔氧化铝膜影响在表层形成了由Ta2O5和Ta-O-N组成的氧化物凸起绝缘层,氧化物凸起层厚度与氧化电压有关.底层Ta-N薄膜电阻率和电阻温度系数基本保持不变,表层氧化凸起使电阻稳定性增加.     

复白噪声中复正弦波频率估计方法研究

在信号处理中,估计淹没在高斯白噪声中的正弦波频率具有相当的应用价值。本文在MATLAB环境下,首先对单谱线法、双谱线法（Rife）以及功率加权求平均等频谱校正算法进行比较。然后通过仿真实验得出,延长观测时间有益于频率估计的结论,并对信号采样频率的选择进行讨论。最后针对短持续时间信号的频率估计,给出了基于复解析带通滤波的...