Schottky barrier heights of contact metals to p-type ZnSe

Schottky barrier heights (SBHs) of a variety of metals (In, Cd, Nb, Ti, W, Cu, Ag, Au, Ni, Pt, and Se) contacting to p-ZnSe grown by a molecular beam epitaxy method were determined by analyzing capacitance-voltage (C-V) and/or current density-voltage (J-V) curves. The SBH values of the Au and Ni contacts were determined from intersections of straight lines of the C⁻²-V curves to be 1.23 and 1.13 eV, respectively. The J-V calculations provided a large SBH value of 1.2 ± 0.1 eV for a variety of metals, indicating that the Fermi-level could be pinned at the contact interface. Reduction of the SBH values to a level lower than 0.4 eV and/or increase of doping concentrations to a level higher than 10²⁰ cm⁻³ are essential to obtain an ohmic contact with contact resistivity of around 10⁻³ Ω·cm².     

Spin Injection Processes in ZnSe-Based Double Quantum Dots of Diluted Magnetic Semiconductors

Spin injection processes in the double quantum dots of ZnSe-based diluted magnetic semiconductors are discussed. Double quantum dots are fabricated from ZnSe-based double quantum wells by electron beam lithography and wet etching. In these samples, the photo-excited carriers in the magnetic dots are injected into the non-magnetic dots. The circular polarization degrees of photoluminescence from the non-magnetic dots are measured by micro-photoluminescence measurement system under the magnetic field up to 5 T. The maximum spin polarization degrees of injected carriers determined from our experiment are 10% for double quantum wells and 15% for double quantum dots. The spin injection efficiency was estimated both from the observed circular polarization degree and the diffusion length of carriers. We concluded that the spin injection efficiency is increased in the double quantum dots.     

Quantum Phase Transition in the Infinite Dimensional Hubbard Model

We investigated the ground state of the infinite dimensional Hubbard model for both attractive and repulsive interactions by applying Gutzwiller type variational wave functions. Our variational wave functions have lower energies than the simple BCS wave function for the attractive case, and lower energies than the Brinkman-Rice state for the repulsive case. We found that the system has several phases depending on the density of electrons and the interaction strength. Investigated phases include antiferromagnetic, Fermi liquid, superconducting, charge density wave, and supersolid phases. The last one is a coexistence phase of superconducting and charge density wave states.     

Remineralization effects of xylitol on demineralized enamel

We morphologically determined the effects of xylitol on the remineralization of artificially demineralized enamel. The samples were demineralized and then immersed in a remineralizing solution with or without 20% xylitol at 37 degrees C for 2 weeks. Samples were observed using contact microradiography, a multipurpose image processor (MIP) and a high-resolution electron microscope (HRTEM). Contact microradiography indicated that remineralization occurred in the surface and deep layers of samples immersed in a non-xylitol solution. Samples immersed in a xylitol solution demonstrated less mineralization in the outer 10 microm of the outermost surface layers, but more mineralization in the middle and deep layers, than was observed in the non-xylitol samples. The MIP evaluation indicated that remineralization was more prominent in layers at depths of 50-60 microm in the xylitol samples than in the non-xylitol samples. Observation of the xylitol samples by HRTEM revealed crystals of various sizes and irregular shapes with unclear crystal angles in the outermost surface layers. In the middle layers, they had thickened and angles of crystals are clear. These results indicate that xylitol can induce remineralization of deeper layers of demineralized enamel by facilitating Ca2+ movement and accessibility.     

Detection of hepatitis C virus RNA in the liver by in situ hybridization

To examine HCV infection histologically, we attempted non-radioactive in situ hybridization of HCV-RNA in the liver. We amplified cDNA probe (360 base pairs) by PCR using the primers deduced from the core region of the HCV genome. The probe was labelled with digoxigenin by PCR and used for in situ hybridization on paraformaldehyde-fixed frozen liver sections. The hybrids were visualized immunohistochemically with alkaline-phosphatase-conjugated anti-digoxigenin and alkaline-phosphatase substrates. HCV-RNA-cDNA hybrids were detected in 21 of 24 patients with positive serum HCV markers, whereas there were no positive signals in the liver of 12 cases without HCV infection. The signal intensity of HCV-RNA-cDNA hybrids was abolished after RNase treatment. Various other specificity experiments also verified specific hybridization of HCV-RNA-cDNA. HCV-RNA was visualized in liver cells and most of them were regarded as hepatocytes from their characteristic features. The infected hepatocytes were frequently associated with mononuclear cell infiltration. Hepatocytes positive for HCV-RNA were sometimes binuclear and distributed in various patterns among cases tested. The present in situ hybridization of HCV RNA is highly sensitive and specific and the results suggest the host immune response to HCV-infected cells.     

Enhancing heat transfer ability of drag reducing surfactant solutions with static mixers and honeycombs

Solutions containing drag reducing additives also show reduced heat transfer which limits their use in district heating and cooling recirculation systems where heat exchange is critical. In this study, static mixers A and B and honeycombs were installed at the entrance to a heat exchanger to break the solution microstructure temporarily and thereby enhancing their heat transfer ability when passing through the heat exchanger. The effectiveness of the destructive devices in enhancing the heat transfer ability of drag reducing cationic and mixed zwitterionic/anionic surfactant solutions was investigated together with the microstructure recovery time and pressure drop penalty paid for the heat transfer enhancement.     

Attenuated total reflection surface-enhanced infrared absorption microspectroscopy for identification of small thin layers on material surfaces

Attenuated total reflection surface-enhanced infrared absorption microspectroscopy (micro-ATR-SEIRA) was developed for the identification of sub-mm size and nm-thick layers on material surfaces by using gold island films deposited on the surface of micro-ATR crystals. A thin layer of triphenyl phosphate (TPP) on a poly(tetrafluoroethylene) (PTFE) membrane filter was used to evaluate the enhancement of the absorption bands. Three types of crystals: diamond, silicon, and germanium, were evaluated. Diamond gave the greatest enhancement with a 12 nm thick gold island film. The enhancement factor was 200 times compared to bare diamond crystal, whereas it was 10 times for germanium crystal. This variation of enhancement factor according to crystal types was presumed to be due to the morphology of the gold films on the crystals. We also obtained an enhanced ATR map over an area of approximately 2 x 6 mm for a thin layer (approximately 1 nm thick) of di-2-ethylhexylphthalate on PTFE using gold-coated hexagonal silicon micro-ATR crystals. This micro-ATR-SEIRA technique has major potential for analyzing small and thin substances on material surfaces.     

A 20 GHz Steerable Array Antenna Using 3-bit Dielectric Slab Phase Shifters on a Coplanar Waveguide

A simple steerable array antenna is designed and developed using a movable dielectric phase shifter. The change of effective dielectric constant at different dielectric slab positions on a coplanar waveguide is used as the phase shifter. The impedance matching and desired phase shift conditions are satisfied at two slab heights, and the reflection is designed to be minimized at these slab positions. The low-loss dielectric material is used as the dielectric slab and is placed close to a coplanar transmission line with airgap. The 4times4 steerable array antenna with the phase shifters is designed and fabricated at 20 GHz. The H-plane radiation patterns are measured at different phase shift positions and compared with the expected results     

Tele-immersive environment with tiled display wall for intuitive remote collaborative work

In remote collaborative work via WAN, sharing and recognizing various high-quality visual contents such as photography, visualization image, and real video streaming is extremely important. Supporting a high-quality display of these contents on a large-scale display system is necessary to support intellectual remote collaborative work. However, these contents are currently magnified in low resolution on a general projector used as large-sized display equipment, and these equipments are difficult to display the contents with sufficient quality. In this paper, we have focused on the tiled display wall technology which configure a wide-area screen with two or more LCD and tried to display realistic high-resolution visual contents to solve these issues. We have constructed a tele-immersive environment with a tiled display wall, and have studied the availability for intuitive remote collaborative work by implementing various collaborative applications for the effective display of high-resolution contents as well as developing interaction techniques for enormous visual contents in this environment. As a result, we have showed that the practical use of a tiled display wall is useful in the construction of intellectual remote collaborative environment.     

Colorectal Laterally Spreading Tumors by Computed Tomographic Colonography

To date, few reports focused primarily on detecting colorectal laterally spreading tumors (LSTs) have been published. The aim of this study was to determine the visibility of LSTs on computed tomographic colonography (CTC) compared with that on colonoscopy as a standard. We retrospectively reviewed and matched data on endoscopic and CTC reports in 157 patients (161 LSTs) who received a multidetector CT scan using contrast media immediately after total colonoscopy at the National Cancer Center Hospital in Tokyo, Japan, between December 2005 and August 2010. The results of the total colonoscopy were known at the time of the CTC procedure and reading. Of the 161 LSTs detected on colonoscopy, 138 were observed and matched by CTC (86%). Of the 91 granular type LSTs (LST-Gs), 88 (97%) were observed and matched, while of the 70 non-granular type LSTs (LST-NGs), 50 (71%) were observed and matched by CTC (p < 0.0001). CTC enabled observation of 73% (22/30) of 20–29 mm, 83% (35/42) of 30–39 mm, 88% (49/56) of 40–59 mm, and 97% (32/33) of ≥60 mm tumors. The rate of observed LSTs by CTC was 86% (97% of LST-G, 71% of LST-NG) of the LSTs found during total colonoscopy.