Characterization and comparison of PECVD silicon nitride and silicon oxynitride dielectric for MIM capacitors

In this letter, we report on the electrical characteristic and the comparison of the metal-insulator-metal (MIM) capacitors with PECVD silicon nitride (SiN) and silicon oxynitride (SiON). Both capacitors are found to exhibit low leakage and high breakdown field strength, as well as absence of dispersive behavior, good linearity, and comparable quality factor behaviors.     

High-transconductance n-type Si/SiGe modulation-doped field-effecttransistors

The authors report on the fabrication and the resultant device characteristics of the first 0.25-μm gate-length field-effect transistor based on n-type modulation-doped Si/SiGe. Prepared using ultrahigh vacuum/chemical vapor deposition (UHV/CVD), the mobility and electron sheet charge density in the strained Si channel are 1500 (9500) cm²/V-s and 2.5×10¹² (1.5×10¹² ) cm^-2 at 300 K (77 K). At 77 K, the devices have a current and transconductance of 325 mA/mm and 600 mS/mm, respectively. These values far exceed those found in Si MESFETs and are comparable to the best results achieved in GaAs/AlGaAs modulation-doped transistors     

Preparation of Protein-Stabilized β-Carotene Nanodispersions by Emulsification–Evaporation Method

This work was initiated to prepare protein-stabilized β-carotene nanodispersions using emulsification–evaporation. A pre-mix of the aqueous phase composed of a protein and hexane containing β-carotene was subjected to high-pressure homogenization using a microfluidizer. Hexane in the resulting emulsion was evaporated under reduced pressures, causing crystallization and precipitation of β-carotene inside the droplets and formation of β-carotene nanoparticles. Sodium caseinate (SC) was the most effective emulsifier among selected proteins in preparing the nanodispersion, with a monomodal β-carotene particle-size distribution and a 17-nm mean particle size. The results were confirmed by transmission-electron microscopy analysis. SC-stabilized nanodispersion also had considerably high ζ-potential (−27 mV at pH 7), suggesting that the nanodispersion was stable against particle aggregation. Increasing the SC concentration decreased the mean particle size and improved the polydispersity of the nanodispersions. Nanodispersions prepared with higher β-carotene concentrations and higher organic-phase ratios resulted in larger β-carotene particles. Although increased microfluidization pressure did not decrease particle size, it did improve the polydispersity of the nanodispersions. Repeating the microfluidization process at 140 MPa caused the nanodispersions to become polydisperse, indicating the loss of emulsifying capacity of SC due to protein denaturation.     

Effects of enzymes and gamma irradiation on the tensile strength and morphology of poly(p-dioxanone) fibers

The objective of this study was to examine how and to what extent a new degradable polymeric fiber, poly(p-dioxanone), used as a surgical suture material, degrades in the presence of enzymes and after γ-irradiation. The degradation of the fiber was studied mechanically using an Instron and morphologically by SEM. Both esterase and trypsin enzymes and their corresponding buffer controls were used. The fibers were γ-irradiated at the dosages ranging from 0 to 20 Mrad, immersed in the solution for up to 70 days, and then removed for tensile strength and morphological examinations. It was found that γ-irradiation alone lowered the tensile strength of PDS fibers and made them more susceptible to hydrolysis. Esterase and trypsin did not accelerate the hydrolytic degradtion of this fiber to any significant level. Both γ-irradiation and enzymes influenced the gross morphological characteristic of PDS fibers when they were subjected to hydrolysis. The most important morphological observations were the formation of surface cracks and chips on the fibers and the subsequent peeling of the chips. Enzyme-treated PDS fibers exhibited similar morphological findings but the size of the chips was smaller. The morphological observations of PDS fibers were consistent with the tensile strength data.     

A rheological model for iron oxide suspensions

We have examined the rheological properties of a Co-adsorbed γ-Fe₂O₃ magnetic suspension with polyurethane (PU) as a binder and methyl ethyl ketone (MEK) or cyclohexanone (CH) as a solvent. A Haake RV20 viscometer was used to measure the suspension viscosity and the vane method was adopted to determine the fluid yield stress. A rheological model which can be viewed as a combination of the Casson model and the Bingham model is proposed to describe the suspension viscosity. The effects of temperature, particle content, and binder concentration are included in the model.     

Packed bed electrodes. I. The electrochemical extraction of copper ions from dilute aqueous solutions

A study has been made of the cathodic deposition of copper ions from flowing dilute aqueous solutions onto a packed bed of graphite. The electrodeposition reaction is mass transfer controlled and expressions are presented for the cathodic current as a function of time, solution flow rate and bed characteristics. These have been verified from potentiostatic experiments. The cathode current efficiency is shown to approach 100% and packed bed electrodes are shown to be an effective means of extracting or removing metal ions from dilute solutions.     

An evaluation of commercial nickel catalysts during hydrogenation of soybean oil

The activities of several commercial nickel catalysts were determined by measuring their activation energies. Among these catalysts, G95E, Resan 22, Nysosel 222 and 325, all with low activation energy, were more active than DM3 and G95H, which had higher activation energy. However, the less active catalysts increased the linoleate selectivity of soybean oil during hydrogenation. The yields of bothtrans isomers and winterized oil were higher for the more selectively hydrogenated oil catalyzed by the less active catalysts. In the sensory evaluation, the fractionated solid fat that contained moretrans isomers was lower in flavor scores than the fractionated liquid oil after hydrogenation and winterization of soybean oil.     

Effect of incipient removal of hydrogen through palladium membrane on the conversion of methane steam reforming: Experimental and modeling

This paper presents a mathematical model based on the reaction rate expressions to describe the displacement of methane conversion in the steam reforming. The effect of several parameters including weight hourly space velocity (WHSV), load-to-surface ratio, reaction pressure, hydrogen partial pressure in permeate side and reaction temperature were investigated. Simulation and experimental results showed that a conversion higher than 80% could be achieved in a palladium membrane reactor at reaction temperature of 500 °C relative to 850 °C in a conventional fixed bed reactor (FBR). Besides, the yield of CO (<2%) in membrane reactor was much lower than that (>50%) in the FBR, which indicated the significant depression of CO production in use of membrane reactor.     

LIQUID PHASE TRANSPORT PROPERTIES IN A HIGH PRESSURE PACKED COLUMN

A mathematical model of fluid flow and mass transfer in a packed bed was derived and used to evaluate the liquid phase axial dispersion and mass transfer coefficients under high pressure conditions. The least-squares method was used to evaluate the rate parameters from experimental breakthrough curves, and the agreement between the concentration curves predicted from rate parameters and those measured experimentally was good. Experiments were performed at 20 and 200°C with water as a solvent and nonporous soda-lime glass beads as packing. Although the axial dispersion coefficient was independent of temperature and pressure, the mass transport parameters were found to be pressure dependent.