X-PLY超强瓦楞纸板动态缓冲特性的试验研究

基于跌落冲击试验,研究X-PLY(A)、X-PLY(B)两种超强瓦楞纸板的动态缓冲性能,获得了动态缓冲特性曲线的经验公式及其特征系数,为X-PLY超强瓦楞纸板在缓冲包装中的推广应用提供了基本数据.结果表明,X-PLY超强瓦楞纸板的动态缓冲特性曲线呈凹谷状,开口向上,只有一个极小值点,冲击加速度波形近似于半正弦波,具有优良的动态缓冲特性,而且X-PLY(A)超强瓦楞纸板的动态缓冲性能比X-PLY(B)超强瓦楞纸板更好.     

Self-assembly synthesis of cactuslike Cu2O 3D nanoarchitectures via a low-temperature solution approach

Cu₂O nanocactuses were synthesized via a simple, low-temperature, and no time-consuming wet chemical route. The synthesized products were systematically studied by X-ray powder diffraction, scanning electron microscopy, and transmission electron microscopy. The results showed that the formation of Cu₂O nanocactuses was strongly depended on the addition of CTAB and NaOH. The structural evolution of the cactuslike Cu₂O was found to follow dissolution and recrystallization processes. It is noteworthy that the stepwise synthetic procedure was crucial to the growth of the final nanoarchitectures. UV–vis spectrum was also used to estimate the absorption and photodegradation ability of the nanocactuses.     

Modulating lateral strain in GaN-based epitaxial layers by patterning sapphire substrates with aligned carbon nanotube films

A novel carbon nanotube-patterned sapphire substrate (CPSS) has been utilized for the growth of GaN material and fabrication of a InGaN/GaN light emitting diode (LED) by metal-organic vapor phase epitaxy. Different lateral strain distributions and stress reductions were observed in a GaN thin film on CPSS compared with those on a conventional sapphire substrate. Nanoheteroepitaxy induced by small size nucleation islands of about 50 nm is ascribed to this significant strain modulation. The crystalline quality of the GaN thin film was also improved, as illustrated by X-ray diffraction. Performances of 1 mm × 1 mm LEDs on CPSS were also enhanced, with an operational power increase of 37.5% and higher saturation current.      

FPGA芯片的多路模拟信号源设计

基于国产FPGA芯片FMK50设计了一种多路高精度模拟信号源。设计由FPGA控制14位高精度DAC完成D/A转换,将产生的信号通过高速模拟开关及采样保持电路实现96路输出;采用内部ADC配合上位机设计自检模块对96路输出信号进行回采与标定。测试结果表明,系统在100%国产化的基础上稳定输出可配置的0～5 V电压信号且精度优于0.2%FS,自检模块设计大大提高了系统的输出精度及自动化程度。     

Critical Roles of Circular RNA in Tumor Metastasis via Acting as a Sponge of miRNA/isomiR

Circular RNAs (circRNAs), a class of new endogenous non-coding RNAs (ncRNAs), are closely related to the carcinogenic process and play a critical role in tumor metastasis. CircRNAs can lay the foundation for tumor metastasis via promoting tumor angiogenesis, make tumor cells gain the ability of migration and invasion by regulating epithelial-mesenchymal transition (EMT), interact with immune cells, cytokines, chemokines, and other non-cellular components in the tumor microenvironment, damage the normal immune function or escape the immunosuppressive network, and further promote cell survival and metastasis. Herein, based on the characteristics and biological functions of circRNA, we elaborated on the effect of circRNA via circRNA-associated competing endogenous RNA (ceRNA) network by acting as miRNA/isomiR sponges on tumor angiogenesis, cancer cell migration and invasion, and interaction with the tumor microenvironment (TME), then explored the potential interactions across different RNAs, and finally discussed the potential clinical value and application as a promising biomarker. These results provide a theoretical basis for the further application of metastasis-related circRNAs in cancer treatment. In summary, we briefly summarize the diverse roles of a circRNA-associated ceRNA network in cancer metastasis and the potential clinical application, especially the interaction of circRNA and miRNA/isomiR, which may complicate the RNA regulatory network and which will contribute to a novel insight into circRNA in the future.     

BOPP薄膜市场现状及发展趋势

介绍了我国双向拉伸聚丙烯薄膜的市场现状,并对其发展趋势进行了展望。     

SOM人工神经网络与阻抗谱方法结合研究涂层的失效过程

    分析了干湿循环条件下有机涂层的电化学阻抗谱特征后选取了阻抗变化率参数作为一维自组织特征映射(self-organizing feature map,SOM)神经网络的训练样本,每个样本对输出层神经元都会产生一定的激发水平,根据该神经网络的特性,输出神经元激发水平的变化趋势便可以反映涂层的降解过程.结合涂层阻抗谱的变化特征,可以把干湿循环条件下涂层的失效过程分为三个阶段,即介质渗入涂层过程,介质到达金属表面诱发金属腐蚀过程和腐蚀扩展涂层剥离过程.     

蛋白质接枝改性腈纶的水解工艺研究

采用NaOH溶液对腈纶进行水解,表面接枝蛋白质制得改性腈纶。讨论了NaOH浓度、水解温度、水解时间对腈纶接枝效果的影响。结果表明:在水解反应温度80~90℃、NaOH溶液质量分数14%、水解时间15 m in时,改性腈纶接枝率较高。力学性能分析和电镜表面观察表明:在腈纶表面接枝大豆蛋白质,不仅可以赋予纤维表面完整的蛋白质覆盖层,而且还可以较好的弥补纤维因水解而产生的表面损伤和力学性能下降等缺陷。