Probabilistic Strength at Serviceability Limit State for Normal and SBHS Slender Stiffened Plates Under Uniaxial Compression

International Journal of Steel Structures - Stiffened plates with high slenderness parameters show large out-of-plane deflections, due to elastic buckling, which may occur before the plates reach...     

Effect of friction stir processing on microstructure of laser clad cobalt-based alloy

(The microstructural refinement of cobalt-based alloy (Stellite No. 6) by laser cladding and friction stir processing (FSP) was studied. A nanometer-sized microstructure consisting of fine carbide (particle size: 100–200 nm) and a grain (grain size: 150–250 nm) was successfully fabricated by the FSP on the laser clad cobalt-based alloy. The nanostructured cobalt-based alloy (Stellite No. 6) had an extremely high hardness of about 750 HV.     

Neutronic and thermodynamic feasibility of UF6-NpF6 fueled transmutation reactor

Transmutation of neptunium, which is contained in radioactive wastes discharged from nuclear reactors, was investigated as a substitutional method for geologic disposal. We proposed a transmutation reactor fueled with a mixture of gaseous ²³³UF₆ and ²³⁷NpF₆. Neutronic and thermodynamic analysis of the reactor revealed the feasibility of the concept. The reactor has two principal advantages: (1) use of the fuel gas enables on-line reprocessing, (2) ²³⁷Np can be transmuted by a high neutron flux. Our calculation indicated that the transmutation rate of ²³⁷Np was 335 g/year/MW_th, which is much larger than the annual yield of ²³²Np in PWR (6.19 g/year/MW_th).     

Modification of cleanup methods for dioxin analysis in green leafy vegetables and comparison of packing methods for a multi-layer silica gel column

To determine polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and coplanar polychlorinated biphenyls (Co-PCBs) in green leafy vegetables, the cleanup method was modified, and packing methods for a multi-layer silica gel column were compared in food samples. First, the additional cleanup was examined for a mono-ortho PCBs fraction obtained by alumina column chromatography from spinach extract. Small solids such as rough crystals that remained after concentration of the mono-ortho PCBs fraction were identified as long-chain hydrocarbons from leaf epicuticular wax by GC/MS. Cleanup using an activated carbon silica gel column with n-hexane as the washing solvent was effective. Next, multi-layer silica gel columns packed by wet packing and dry packing were compared using komatsuna, salmon and butter as samples. The columns prepared by both methods gave similar values at each isomeric concentration level and showed similar efficiency with favorable recoveries.     

High temperature catalytic combustion of methane and propane over hexaaluminate catalysts: NOx emission characteristics

Several hexaaluminate-related materials were prepared via hydrolysis of alkoxide and powder mixing method for high temperature combustion of CH₄ and C₃H₈, in order to investigate the effect of the concentration of the fuels, O₂ and H₂O on NO_x emission and combustion characteristics. Among the hexaaluminate catalysts, Sr_0.8La_0.2MnAl₁₁O₁₉₋ prepared by the alkoxide method exhibited the highest activity for methane combustion and low NO_x emission capability. NO_x emission at 1500 °C was increased linearly with O₂ concentration, whereas water vapor addition decreased NO_x emission in CH₄ combustion over the Sr_0.8La_0.2MnAl₁₁O₁₉₋ catalyst. In the catalytic combustion of C₃H₈ over the Sr_0.8La_0.2MnAl₁₁O₁₉₋ catalyst, the amount of NO_x emitted was raised in the temperature range between 1000 and 1500 °C when the C₃H₈ concentration increased from 1 to 2 vol.%. It was found that NO_x emission in this temperature range was reduced effectively by adding water vapor.     

Defective Thyroglobulin: Cell Biology of Disease

The primary functional units of the thyroid gland are follicles of various sizes comprised of a monolayer of epithelial cells (thyrocytes) surrounding an apical extracellular cavity known as the follicle lumen. In the normal thyroid gland, the follicle lumen is filled with secreted protein (referred to as colloid), comprised nearly exclusively of thyroglobulin with a half-life ranging from days to weeks. At the cellular boundary of the follicle lumen, secreted thyroglobulin becomes iodinated, resulting from the coordinated activities of enzymes localized to the thyrocyte apical plasma membrane. Thyroglobulin appearance in evolution is essentially synchronous with the appearance of the follicular architecture of the vertebrate thyroid gland. Thyroglobulin is the most highly expressed thyroid gene and represents the most abundantly expressed thyroid protein. Wildtype thyroglobulin protein is a large and complex glycoprotein that folds in the endoplasmic reticulum, leading to homodimerization and export via the classical secretory pathway to the follicle lumen. However, of the hundreds of human thyroglobulin genetic variants, most exhibit increased susceptibility to misfolding with defective export from the endoplasmic reticulum, triggering hypothyroidism as well as thyroidal endoplasmic reticulum stress. The human disease of hypothyroidism with defective thyroglobulin (either homozygous, or compound heterozygous) can be experimentally modeled in thyrocyte cell culture, or in whole animals, such as mice that are readily amenable to genetic manipulation. From a combination of approaches, it can be demonstrated that in the setting of thyroglobulin misfolding, thyrocytes under chronic continuous ER stress exhibit increased susceptibility to cell death, with interesting cell biological and pathophysiological consequences.     

Oily Grime Formed on Hard Surfaces of Kitchen Appliances: Chemical Composition and Oxidation Mechanism

The cooking of oil-containing food products at high temperatures results in an insoluble, unsightly, greasy layer of grime on appliance surfaces in residential and commercial kitchens. Over time, adsorbed grime becomes difficult to remove using normal dishwashing detergents. A number of studies have focused on the deterioration and oxidation of oils and the harmful effects that volatile compounds associated with such processes have on human health. Little attention, however, has been paid to kitchen grime. The present study examined grime obtained from the surfaces of appliances such as sirocco fans, filters, and range hoods in residential kitchens in Tokyo. The grime was characterized by X-ray fluorescence spectroscopy (XRF), Fourier-transform infrared spectroscopy (FT-IR), size exclusion chromatography (SEC), thermal hydrolysis methylation–gas chromatography–mass spectroscopy (THM–GCMS), and nuclear magnetic resonance (NMR) techniques. The chemical composition and structure of the grime differed from those of the edible oils. The grime consisted mainly of polymerized and oxidized triacylglycerols. Bridging between unsaturated acyl groups of triglycerols occurred through thermal oxidation and aging in air, yielding their dimers, trimers, and highly polymerized products while also transforming unsaturated acyl groups into saturated ones. Cross-linking reactions involving dibasic acids also caused polymerization. Those polymerized products strongly adhered to the hard surfaces of the appliances. Small amounts of cellulose fibers from air or towel may also play a role in mechanically stabilizing the dirt structure.

Vinyl polymerization by metal complexes. XVIII. Kinetics of the polymerization of acrylonitrile initiated by imidazole-copper-(II) complexes

A study on the kinetics and mechanism of the polymerization of acrylonitrile initiated by imidazole and 2-substituted imidazole-copper-(II) complexes was made in dimethyl sulfoxide solution at 40–70°C. The rate of polymerization, Rp, could be expressed as follows: The overall activation energies of these polymerization processes are in a range from 14.2 to 69.1 KJ mole^-1. From the data of electronic spectra and electron paramagnetic resonance, it was confirmed that the polymerization in question could be initiated by free radicals which were formed by the reduction of copper-(II) complex to copper-(I) complex, and the latter formed a new complex with polyacrylonitrile resulted.     

Internal-external transition for the oxidation of Fe-Cr-Ni austenitic stainless steels in steam

Several Fe-Cr-Ni austenitic stainless steels (Cr wt.%: 13–25, Ni wt.%: 15) were oxidized in steam for 1000 hr at 500–900°C. The oxide scales were examined and categorized with respect to the chromium concentration and the grain size of the base metal. Experiments showed three conditions for the critical bulk Cr concentration and the oxidation temperature at which the oxidation behavior changed drastically. Metallographic examination showed that two of these three conditions resulted from the internal-external transition of Cr₂O₃ either on the metal surface or along the grain boundaries of the base metal. Attempts were made to interpret these conditions from the available oxidation theories. Atkinson's treatment was employed with some modification to incorporate the grain-boundary diffusion of Cr in the base metal. The calculation basically explained the internal-external transition for the oxidation of these steels.     

Numerical simulation on void bubble dynamics using moving particle semi-implicit method

In present study, the collapse of void bubble in liquid has been simulated using moving particle semi-implicit (MPS) code. The liquid is described using moving particles and the bubble–liquid interface was set to be vacuum pressure boundary without interfacial heat mass transfer. The topological shape of bubble can be traced according to the motion and location of interfacial particles. The time dependent bubble diameter, interfacial velocity and bubble collapse time were obtained under wide parametric range. The comparison with Rayleigh and Zababakhin's prediction showed a good agreement which validates the applicability and accuracy on MPS method in solving present momentum problems. The potential void induced water hammer pressure pulse was also evaluated which is instructive for further material erosion study. The bubble collapse with non-condensable gas has been further simulated and the rebound phenomenon was successfully captured which is similar with vapor-filled cavitation phenomenon. The present study exhibits some fundamental characteristics of void bubble hydrodynamics and it is also expected to be instructive for further applications of MPS method to complicated bubble dynamics problems.