Improvement of characteristics of new-type solar cells, having a “transparent conductor/thin Si02 layer with ultrafine metal particles as conductive channels/n-Si” junction

New-type solar cells, having a structure “transparent conductor/thin Si0₂ layer with ultrafine metal islands as conductive channels/n-Si” have been prepared by forming a very thin (< 1.0 nm) silicon oxide (Si0₂) layer as well as platinum (Pt) islands (5–50 nm in size) embedded in it on a single crystal n-type silicon (n-Si) wafer, followed by the deposition of an indium tin oxide (ITO) film (200 nm thick) by the electron-beam evaporation method. The open-circuit photovoltages (V_oc) of the solar cells of the above structure were relatively low, 0.25–0.47 V, but they increased very much to 0.50–0.59 V if a thin (3–10 nm) layer of an organic compound such as copper phthalocyanine (CuPc) was pre-deposited on the Pt-island modified n-Si wafer before the ITO deposition. The reason for the beneficial effect of the pre-deposition of the thin CuPc layer was investigated in detail, and it has been found that certain crystal defects are formed in n-Si near the n-Si/Si0₂ interface during the ITO deposition in the absence of the CuPc layer. The formation of such defects is prevented in the presence of the CuPc layer, which leads to a decrease in surface carrier recombination and hence to the increase in V_oc.     

Development of new indices to assess the contribution of moisture sources to indoor humidity and application to optimization design: Proposal of CRI(H) and a transient simulation for the prediction of indoor humidity

Many indoor and outdoor factors (e.g., the presence of occupants, hot-water supply equipment, the use of hygroscopic materials, and ventilation) contribute to indoor humidity. It is important to investigate and understand the contribution of each factor to indoor humidity and to establish an effective method for the design and control of indoor humidity. In this study, indoor humidity was treated as a linear summation of the contribution of various factors, all of which can cause an increase or decrease in indoor humidity. New indices for assessing the contribution of factors to the humidity distribution in a room are proposed as Contribution Ratios of Humidity (CRI_(H)) 1, 2, and 3 which can be calculated based on Computational Fluid Dynamics (CFD) simulations. Furthermore, a transient simulation based on CRI_(H)1 and the Contribution Ratio of Indoor Climate (CRI_(C)) was developed to predict the indoor humidity distribution. A 100-day transient analysis was performed in a living room in which moisture-buffering materials were used. The simulation results were compared with those from a well-mixed zonal model and a CFD transient analysis to confirm the effectiveness of the approach. The analysis provided the three-dimensional spatial distribution of indoor humidity and temperature with good prediction accuracy. The calculation time was approximately equal to that of the well-mixed zonal model and much faster than that of the CFD transient analysis.     

Suppression by carotenoids of microtenoids of microcystin-induced morphological changes in mouse hepatocytes

Microcystin-LR is a liver tumor promoter in the okadaic acid class, a group of potent inhibitors of protein phosphatases 1 and 2A. Because of inhibition of protein phosphatases, microcystin-LR induces hyperphosphorylation of cellular proteins, including cytoskeletal proteins—cytokeratins 8 and 18—and causes morphological changes in mouse hepatocytes in primary culture. We studied the effects of carotenoids to antagonize microcystin-LR-induced morphological changes in hepatocytes. β-Carotene (100 nM to 100 μM), suppressed the morphological changes induced by 100 nM microcystin-LR in a dose-dependent manner. Other carotenoids tested exerted similar suppressive effects, although retinoids, such as all-trans retinol, all-trans retinoic acid, and 9-cis retinoic acid, were only weakly suppressive. The relative potency of the suppression correlated significantly with the number of conjugated double bonds in thetrans configuration. β-Carotene strongly suppressed the hyperphosphorylation of cellular proteins induced by microcystin-LR without significant changes in the basal phosphorylation level. Other antioxidants, such as α-tocopherol, did not protect the cells against microcystin-LR. Taken together, the antagonistic effects of carotenoids against microcystin-LR are difficult to explain by their antioxidant or provitamin A activities. Suppression of the hyperphosphorylation of cellular proteins may be a novel mechanism by which carotenoids inhibit tumor promotion.     

Realtime network management support systems at NTT

This paper describes realtime network management support systems which have been developed forntt’s telephone network. In particular, the advanced traffic observation and management information collecting system referred to as Atomics and the traffic congestion control system referred to astcs are presented. The purpose of the development, concept, functions and capabilities of each system are explained. Examples of powerful realtime network management supported by Atomics andTSC are also presented.     

A system for measuring magnetic core noise as a function of themagnetization level

The problem of magnetic core noise is considered in terms of non-repeatability of the hysteresis loop trace for any repetition of the magnetization process. The examination condition is that the effect of eddy currents is reduced to as low a level as possible. Based on such premises, this paper presents a system which periodically extracts the fluctuation voltage, induced at an arbitrary but specified point of the impressed magnetic field, as an instantaneous value. The minimum extraction interval is mainly determined by the integration time of the digital voltmeter used to measure the voltage and by the time required for transferring the extracted data to a personal computer. Therefore, the upper limit of the repetition frequency for the magnetization is restricted to less than 1 Hz. The serially extracted time data is dealt with in a statistical manner and is arranged in order as a magnitude distribution. Two kinds of cores are tested, one is a Fe-Ni-based amorphous core and the other a supermalloy. The results reveal that each core has distinctive noise features