Growth and characterization of Cu(InA1)Se2 by vacuum evaporation

Quaternary chalcopyrite compounds Cu(In_1−xAl_x)Se₂ were prepared by vacuum evaporation method. It is found that the ratio of In/Al determines the nature of semiconducting properties from n-type in the region of In/Al 1 to p-type in the region of In/Al > 1.     

Molecular dynamics simulation of dislocation nucleation and motion at γ/γ′ interface in Ni-based superalloy

Molecular dynamics simulations are conducted on the dislocation behavior at the apices and edges of cuboidal Ni₃Al precipitate in a pure Ni matrix, or the idealized γ/γ′ microstructure in a Ni-based superalloy. A tensile simulation of the [001] direction is implemented with a periodic cell that has eight cubic precipitates in order to investigate the nucleation site of dislocation in the idealized microstructure with no defects other than the γ/γ′ interfaces. The effect of residual internal stresses on the stability of the interfaces is also discussed. Other simulations are conducted on the behavior of edge dislocations nucleated from a free surface and proceeding in the γ matrix toward γ′ precipitates under shear force. Dislocation pinning at γ′ precipitates, bowing-out in the γ channel, pile-up and nucleation of superdislocation in the γ′ precipitate are simulated and inspected in detail. Discussions on the size of the γ/γ′ microstructure and the sharpness of the edge of the γ′ precipitate are also presented.     

Development of cube-type SOFC stacks using anode-supported tubular cells

Tubular SOFCs have shown many desirable characteristics such as high thermal stability during rapid heat cycling and large electrode area per unit volume, which can accelerate to realize SOFC systems applicable to portable devices and auxiliary power units for automobile. So far, we have developed anode-supported tubular SOFCs with 0.8–2 mm diameter using Gd-doped CeO₂ (GDC) electrolyte, NiO-GDC anode and (La, Sr)(Co, Fe)O₃ (LSCF)-GDC cathode. In this study, a newly developed cube-type SOFC stack which consists of three SOFC bundles was designed and examined. The bundle consists of three 2 mm diameter tubular SOFCs and a rectangular shaped cathode support where these tubular cells are arranged in parallel. The performance of the stack whose volume is less than 1 cm³ was shown to be 2.8 V OCV and over 1 W at 1.6 V under 500 °C. Cathode loss factor due to current collection from cathode matrix was also estimated using a proposed model.     

Decision-making in electrical appliance use in the home

This paper presents the results of a survey as well as an argument from the viewpoint of behavioral economics with the aim of clarifying how consumers make decisions about electrical appliance use in the home. A survey of consumers showed that most have little awareness of the energy efficiency of appliances, the price of the services produced by electrical appliances, or electricity rates. These findings indicate that price does not function as a signal in electricity consumption through electrical appliance use. Rather, we found that consumer decision-making in electricity consumption is dependent on the characteristics of the particular electrical appliances they use. Additionally, we argue that the payment system for home electricity consumption plays an important role in decision-making, causing biases due to aspects of human psychology discussed here in terms of satisficing and heuristics, payment decoupling, and budgeting. We conclude that decision-making about electrical appliance use and electricity consumption in the home is not always rational and is affected both by the particular characteristics of appliances and the payment system for electricity consumption along with human psychology.     

波形碳纳米管增强复合材料的有效刚度和局部应力的宏微观均质化数值模拟

采用分子动力学方法简化的碳纳米管等效纤维模型,利用具有精确周期性边界条件的均质化理论和宏微观均质化法分析正弦波形非连续碳纳米管的有效刚度和局部应力分布规律.结果表明,纳米增强复合材料的有效刚度和局部应力对碳纳米管的波形非常敏感,碳纳米管稍有弯曲就会导致复合材料有效刚度降低和应力传递能力的下降,为揭示复合材料中碳纳米管的增强机制和改善增强效果提供理论依据.     

Development of numerical scheme for phase field crystal deformation simulation

The phase field crystal (PFC) method is anticipated as a new multiscale method, because this method can reproduce physical phenomena depending on atomic structures in metallic materials on the diffusion time scale. Although the PFC method has been applied to some phenomena, there are few studies related to evaluations of mechanical behaviors of materials by appropriate PFC simulation. In a previous work using the PFC method, tensile deformation simulations have been performed under conditions where the volume increases during plastic deformation. In this study, we developed a new numerical technique for PFC deformation simulation that can maintain a constant volume during plastic deformation. To confirm that the PFC model with the proposed technique can reproduce appropriate elastic and plastic deformations, we performed a series of deformation simulations in one and two-dimensions. In one- and two-dimensional single-crystal simulations, linear elastic responses were confirmed in a wide strain rate range. In bicrystal simulations, we could observe typical plastic deformations due to the generation, annihilation and movement of dislocations, and the interaction between the grain boundary and dislocations. Moreover, the deformation behaviors of a nanopolycrystalline structure at high temperature were simulated and the intergranular deformations caused by grain rotation and grain boundary migration were reproduced.     

Excitation density dependence of luminescence spectrum of electron-hole plasma in diamond

Time-resolved band edge luminescence spectrum in IIa diamond has been measured with the 5th harmonics of a pulsed YAG laser (5.82 eV) and an ICCD image intensifier of 5 ns gate width at 290 K. The time-resolved luminescence spectrum is decomposed into three components of free exciton (FE), excitonic complex (EC) and electron-hole plasma (EHP). The decay times of the FE and EC luminescence are 45 and 27 ns, respectively and that of the EHP luminescence has been seen to be shorter than the gate width, 5 ns. The low energy onset of the EHP luminescence spectrum has been observed to decrease with increasing excitation density and attains the onset of the electron-hole drop luminescence spectrum at the excitation density of 0.6 J/cm², at which the electron-hole pair density is 1.2 × 10²⁰ cm^? 3. Furthermore, the excitation density dependences of the FE, EC and EHP luminescence intensities are explained with the percolation theory.     

Analysis of polymer electrolyte fuel cell performance by electrode polarization model

For development of polymer electrolyte fuel cell (PEFC) lifetime estimation method, a high accuracy PEFC electrode polarization model is required. An electrode polarization model which was previously proposed was verified. However, accuracy of the electrode polarization model was not enough to estimate PEFC performance under various conditions. A new high accuracy PEFC electrode polarization model has been developed based on electrochemical consideration and data observed at elevated pressures. In the cathode polarization model, effects of O₂ diffusion and H₂O plugging have to be considered to obtain high accuracy for long-term operation. In addition, PEFC performance degradation was analyzed by the electrode polarization model. Main factors of PEFC performance degradation are OCV drop, the cathodic activation polarization, voltage drops by O₂ diffusion and H₂O plugging.     

Bacillus cereus septicemia in a patient with severe aplastic anemia

A 78-year-old female was admitted with complaints of malaise and fatigue in the legs. The patient was diagnosed as severe aplastic anemia and treatment was started with metenolone and steroid pulse therapy. Administration of antibiotics and granulocyte-colony stimulating factor which led to a resolution of the high fever. About four months after admission, the patient developed vomiting and abdominal pain with a spiking fever. The next day after suddenly losing consciousness, she died. B. cereus was isolated from blood cultures. Autopsy specimens of the liver, cardiac muscle and lung showed changes due to B. cereus. This pathogen is widely distributed in nature. We should not overlook B. cereus as a contamination, but rather should consider it a potential pathogen in immunocompromised hosts, when it is isolated from blood cultures.