Electroelastic Response of Cylindrical Fiber with D∞ Symmetry Exposed to Local Electric Field Through Opposed Electrode Pair

To obtain practical information on the electroelastic behavior of poly-l-lactic acid microtweezers or catheters, a previously constructed analytical technique is used to obtain the electroelastic field solution of a poly-l-lactic acid cylindrical fiber exposed to a local electric field, which is applied through an opposed pair of square-sectioned electrodes. The numerical representation of the solution reveals the detailed field quantity distributions, their importance in the design of microtweezers and catheters, the overall deformation of such devices, and the effects of the electrode dimensions on the deformation.     

In Vivo Simultaneous Analysis of Gene Expression by Dual-Color Luciferases in Caenorhabditis elegans

Both fluorescent and luminescent observation are widely used to examine real-time gene expression patterns in living organisms. Several fluuorescent and luminescent proteins with specific optical properties have been developed and applied for simultaneous, multi-color observation of more than two gene expression profiles. Compared to fluorescent proteins, however, the application of multi-color luminescent imaging in living organisms is still limited. In this study, we introduced two-color luciferases into the soil nematode C. elegans and performed simultaneous analysis of two gene expression profiles. Using a green-emitting luciferase Eluc (emerald luciferase) and red-emitting luciferase SLR (stable luciferase red), the expression patterns of two genes were simultaneously observed in single animals from embryonic to adult stages over its whole life span. In addition, dual gene activities were observed at the single embryo level, with the simultaneous observation of morphological changes. These are the first application of a two-color luciferase system into a whole animal and suggest that precise relationship of expression patterns of multiple genes of interest can be analyzed over the whole life of the animal, dependent on the changes in genetic and/or environmental conditions.     

Porous poly(L‐lactic acid)/poly(ethylene glycol) blend films

Poly(L ‐lactic acid) (PLLA: M_w = 19.4 × 10⁴)/poly(ethylene glycol) (PEG: M_w = 400) blend films were formed by use of a solvent‐cast technique. The properties and structures of these blend films were investigated. The Young's modulus of the PLLA decreased from 1220 to 417 MPa with the addition of PEG 5 wt %, but the elongation at break increased from 19 to 126%. The melting point of PLLA linearly decreased with increases in the PEG content (i.e., pure PLLA: 172.5°C, PLLA/PEG = 60/40 wt %: 159.6°C). The PEG 20 wt % blend film had a porous structure. The pore diameter was 3–5 μm. The alkali hydrolysis rate of this blend film was accelerated due to its porous structure. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 965–970, 2004     

Development of lateral displacement sensor for real‐time detection of structural damage

We have developed a novel sensor that enables us to measure the relative story displacement of a building structure in real time. This lateral displacement sensor (LDS) is composed of a light‐emitting diode (LED) array, which is fixed on the ceiling, and a position‐sensitive detector (PSD) unit, which is placed on the floor. We optimized the LDS to achieve high accuracy in lateral displacement measurement. The accuracy was evaluated to be 60 µm by conducting shaking table tests. Two LDSs were implemented in an actual building equipped with an active variable stiffness (AVS) system, and the building was vibrated with seismic waveforms by an exciter placed on the rooftop. The seismic displacement of the second floor relative to the first floor was measured using the LDS. Furthermore, the inclination angle of the second floor could be measured using the LDS during the seismic vibration. Using the AVS system, we realized the residual displacement of the second floor without inducing damage to the building, and succeeded in real‐time residual displacement measurement for the first time. These results indicate that the LDS is useful for the health diagnosis of a building structure. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Application of the partial element equivalent circuit method to tower surge response calculations

This article presents calculations of tower surge responses and insulator voltages of an actual transmission tower including ground wires and phase wires. The partial element equivalent circuit (PEEC) method is applied as a simulation tool. Surge responses of the tower and insulator voltages calculated by the PEEC method are compared with electro magnetic transients program (EMTP) simulated results and experimental results collected from the literatures. The results calculated by the PEEC method agree well with the experimetal results, not only amplitudes but also waveshapes. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Effects of diffuser shape and back pressure on the performance of disk MHD generators

The effects of diffuser shape and back pressure on the performance of closed‐cycle disk MHD generators are investigated with two‐dimensional numerical simulations taking account of the boundary layer. The enthalpy extraction ratio decreases and fluctuates periodically with increase in the back pressure. The amplitude of power output fluctuation and the period depend on the volume of the inverse flow region. For the reduced height diffuser, the inverse flow region is suppressed and the fluctuation becomes smaller than that for the constant height diffuser. When operated with a back pressure lower than an optimum value, the diffuser does not work because of reacceleration in the diffuser. For the higher back pressure, on the contrary, the inverse flow region propagates into the MHD channel, then the enthalpy extraction ratio is reduced and the Mach number at the exit of the MHD channel becomes lower than unity. For the optimum back pressure, high enthalpy extraction ratio is achieved and the adiabatic efficiency at the diffuser exit is decreased by several percent from that evaluated at the MHD channel exit. © 2000 Scripta Technica, Electr Eng Jpn, 133(2): 11–19, 2000     

Hydrogen production through dry reforming of biogas using a porous electrochemical cell: Effects of a cobalt catalyst in the electrode and mixing of air with biogas

This paper reports the performance of porous Gd-doped ceria (GDC) electrochemical cells with Co metal in both electrodes (cell No. 1) and with Ni metal in the cathode and Co metal in the anode (cell No. 2) for CO₂ decomposition, CH₄ decomposition, and the dry reforming reaction of a biogas with CO₂ gas (CH₄ + CO₂ → 2H₂ + 2CO) or with O₂ gas in air (3CH₄ +?1.875CO₂ +?1.314O₂ → 6H₂ +?4.875CO +?0.7515O₂). GDC cell No. 1 produced H₂ gas at formation rates of 0.055 and 0.33?mL-H₂/(min?m²-electrode) per 1?mL-supplied gas/(min?m²-electrode) at 600?°C and 800?°C, respectively, by the reforming of the biogas with CO₂ gas. Similarly, cell No. 2 produced H₂ gas at formation rates of 0.40?mL-H₂/(min?m²) per 1?mL-supplied gas/(min?m²) at 800?°C from a mixture of biogas and CO₂ gas. The dry reforming of a real biogas with CO₂ or O₂ gas at 800?°C proceeded thermodynamically over the Co or Ni metal catalyst in the cathode of the porous GDC cell. Faraday's law controlled the dry reforming rate of the biogas at 600?°C in cell No. 2. This paper also clarifies the influence of carbon deposition, which originates from CH₄ pyrolysis (CH₄ → C + 2H₂) and disproportionation of CO gas (2CO → C + CO₂), on the cell performance during dry reforming. The dry reforming of a biogas with O₂ molecules from air exhibits high durability because of the oxidation of the deposited carbon by supplied air.     

Mutations Associated with Functional Disorder of Xanthine Oxidoreductase and Hereditary Xanthinuria in Humans

Xanthine oxidoreductase (XOR) catalyzes the conversion of hypoxanthine to xanthine and xanthine to uric acid with concomitant reduction of either NAD⁺ or O₂. The enzyme is a target of drugs to treat hyperuricemia, gout and reactive oxygen-related diseases. Human diseases associated with genetically determined dysfunction of XOR are termed xanthinuria, because of the excretion of xanthine in urine. Xanthinuria is classified into two subtypes, type I and type II. Type I xanthinuria involves XOR deficiency due to genetic defect of XOR, whereas type II xanthinuria involves dual deficiency of XOR and aldehyde oxidase (AO, a molybdoflavo enzyme similar to XOR) due to genetic defect in the molybdenum cofactor sulfurase. Molybdenum cofactor deficiency is associated with triple deficiency of XOR, AO and sulfite oxidase, due to defective synthesis of molybdopterin, which is a precursor of molybdenum cofactor for all three enzymes. The present review focuses on mutation or chemical modification studies of mammalian XOR, as well as on XOR mutations identified in humans, aimed at understanding the reaction mechanism of XOR and the relevance of mutated XORs as models to estimate the possible side effects of clinical application of XOR inhibitors.     

Hydrolytic degradation of poly(L-lactic acid): Combined effects of UV treatment and crystallization

Amorphous and crystallized poly(L -lactic acid) (PLLA) films were prepared and the hydrolytic degradation of the ultraviolet (UV)-treated and UV-nontreated films was investigated. This study reveals that the combination of UV and thermal treatments can produce the PLLA materials having different hydrolytic degradation profiles and that the UV-irradiation in the environment will affect the design of recycling process for PLLA articles. In an early stage, the degrees of hydrolytic degradation monitored by weight loss (W_loss), number-average molecular weight (M _n), and melting temperature (T _m) were higher for the UV-treated films than for the UV-nontreated films. In a late stage, the trend traced by W_loss was reversed, and the difference in the degrees of hydrolytic degradation between the UV-treated and UV-nontreated films monitored by M _n and T _m became smaller, with the exception of the degrees of hydrolytic degradation of the amorphous films traced by T _m. Also, in the early stage, the degrees of hydrolytic degradation monitored by W_loss and M _n were higher for the crystallized films than for the amorphous films. In the late stage, this trend was reversed, with the exception of the degrees of hydrolytic degradation of the UV-treated films monitored by M _n. The main factors that determined the W_loss and T _m were the molecular weight and initial crystallinty but not the molecular structures such as terminal CC double bonds and crosslinks. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Avoiding Routing Loops on the Internet

Suppose that some particular link in the Internet is currently congested. A natural solution is to try to make packets bypass that link. This can be done by increasing the cost of that link intentionally, say from a ₁ to a ₂, since the Internet uses shortest-path routing. Unfortunately, however, this often causes temporary loops for packet traveling, called routing loops. In this paper we show that routing loops can be avoided by increasing the cost of the link not directly from a ₁ to a ₂ but through an intermediate value, a ₃, i.e., from a ₁ to a ₃ and then to a ₂. We may need several intermediate values. We show that in this case the greedy strategy, namely, raising the cost as much as possible in each step, is optimal.