Carbon molecular sieve membranes derived from trimethylsilyl substituted poly(phenylene oxide) for gas separation

Carbon molecular sieve membranes for gas separation prepared using poly(phenylene oxide) (PPO) as precursor have been examined. The PPO precursor was modified by introducing a trimethylsilyl (TMS) substituent and its effect on the gas transport property of the resulting carbon membrane was examined. TMS-substituted PPO (TMSPPO) was prepared in a high yield by a simple one-step reaction, and its carbon membrane was successfully fabricated. The modification improved the gas permeability of the resulting membrane which also exhibited excellent O₂/N₂ and CO₂/CH₄ separation performance comparable to those of polyimide-derived carbon membranes. From the analysis of the microstructure of the TMSPPO carbon membranes, it is believed that the TMS groups improve gas diffusivity by increasing the micropore volume.     

Effect of Agglomeration on Mechanical Properties of Porous Zirconia Fabricated by Partial Sintering

Porous ZrO₂ ceramics were fabricated by compacting a fine ZrO₂ powder, followed by pressureless sintering. Two unidirectional pressures of 30 and 75 MPa were used to prepare the green compacts. The strength and the fracture toughness of porous ZrO₂ specimens sintered from the compacts prepared by 75 MPa were substantially higher than those by 30 MPa, especially for the specimens with low porosity. However, the corresponding Young's moduli were identical. This caused the strain to failure of these porous bodies to increase significantly with increasing compaction pressure. Microstructural analyses showed that a number of voids and small flaws existed in the green compacts prepared by the lower pressure, due to the agglomeration of fine ZrO₂ grains. It was revealed that the ZrO₂ agglomeration resulted in a localized nonuniform shrinkage and degraded the mechanical properties of porous ZrO₂ ceramics.     

Reaction of sodium perborate with a chlorinated cyclic hindered amine (TMP-Cl): I. Quantitative evaluation of active oxygen species in fabric bleaching

The reaction of N-chloro-4-hydroxy-2,2,6,6-tetramethylpiperidine (TMP-Cl) with sodium perborate (PB) was investigated with special reference to the generation of singlet oxygen and the possible application to a new oxidative bleaching process. Generation of the singlet oxygen (¹O₂), the hydroxyl radical (HO·) and superoxide anion radical (O₂·⁻) in the PB/TMP-Cl mixed solution was confirmed by the trapping reagent method. From the results of another experiment, in which the bleaching abilities of each active oxygen species were confirmed, the main active oxygen species contributing to the bleaching of purpurogallin, the skeleton of black tea pigment, in the PB/TMP-Cl system was concluded to be¹O₂.     

Immobilization of multicopper oxidase from Pyrobaculum aerophilum onto an electrospun-aligned single-walled carbon nanotube surface via a carbon-nanotube-binding peptide for biocathode

Biofuel cells (BFCs) that produce electrical energy from organic resources through enzymatic reactions have been attracting significant attention. Owing to the high electrical conductivity of carbon nanotubes (CNTs), their modification on the electrode surface of a BFC is expected to increase the current, and their high specific surface area may be useful in increasing the power output. Previously, we constructed a biocathode by immobilizing multicopper oxidase from Pyrobaculum aerophilum (McoP) with a carbon nanotube binding peptide (CBP) sequence on the CNTs. This resulted in higher current densities than when using enzymes without CBP sequences. However, owing to the randomly stacked CNTs on the surface of the electrodes, their conductive properties were impaired and performance as biocathodes was poor. Herein, we constructed a biocathode in which single-walled CNTs (SWCNTs) were oriented one-dimensionally and McoP is immobilized on the surface of an SWNCT via CBP. The current density was successfully increased by two-fold by orienting the CNTs and orienting and immobilizing McoP on their surfaces. This technology provides insights into the development of biodevices with controlled orientation of both the SWCNTs and enzymes immobilized on their surfaces.     

Enzyme-linked immunosorvent assay using vertical microreactor stack with microbeads

The advantages of vertical microreactor stack with three-dimensional (3D) structure for immunoassay are discussed. The vertical microreactor stack uses vertical fluid flow operation with multifunctional fluid filters. The multi function of fluid filter is very effective for micromixing and passive valve operation. The mechanism of micromixing is discussed by using computational fluid dynamics (CFD), and we know that the mixing mechanism based on Coanda effect. To evaluate the micromixing performance of fluid filter, we demonstrated enzyme reaction with unique repeat mixing operation. As the results, we proved that the fluid filter has very effective mixing performance. The detection limit, which demonstrated by competition enzyme-linked immunosorvent assay (ELISA), is comparable with recommended detection limit, which suggested by Japanese ministry for the environment.     

High efficiency mixing by the use of cross-linked micro capillary fluid filter

A novel type passive mixing device that causes the three-dimensional flow was proposed. This mixer consists of the integrated capillary bundle structure. And the capillaries ware cross-linked each other. So it is called cross-linked micro capillary filter. The mixing effect of the cross-linked micro capillary filter was calculated by the computational fluid dynamics (CFD). The fluid behaviour in the fine three-dimensional structure could be analysed by the use of CFD. In the result of CFD calculation, the cross-linked micro capillary filter estimated high mixing effect. Moreover, the mixing efficiency was become higher by change the cross-linked form. The calculation result was decided the form of the cross-linked micro capillary filter. And this filter was fabricated by application of the Deep X-ray lithography. To form the cross-linked capillary, it was operated twice exposures. In these exposures, respectively the exposure stage was tilted to difference angle. The cross-linked capillary filter fabricated in this way was applied to vertical fluid flow operation. This cross-linked capillary filter could hold and transmit the fluid by the switchover of in impressed pressure. Herewith the cross-linked micro capillary filter showed availability as high efficiency mixing device.     

A new optical elasticity resin for mobile LCD modules

Abstract— The display used in current cell phones has an air gap between the cover glass and the liquid‐crystal‐display (LCD) module to prevent the LCD glass from being damaged. Reflections at the boundaries of the air gap cause a reduction in the LCD luminance and contrast. To address this problem, a newly proposed LCD structure has been investigated. The “Super View Resin (SVR),” a transparent elastic resin which improves the shock resistance and visibility of the LCD, has been developed. Filling the air gap between the cover glass and LCD module with a refractive‐index‐matching resin solves the light‐reflection problem inherent in the use of a reinforced cover‐glass lens. Moreover, the elastic filler works as a damper, reducing any external shock, which prevents not only the cover glass and LCD module from being damaged, but also the glass from being shattered when it is broken.     

Development of an epileptic seizure prediction algorithm using R–R intervals with self-attentive autoencoder

Epilepsy is a neurological disorder that may affect the autonomic nervous system (ANS) from 15 to 20 min before seizure onset, and disturbances of ANS affect R–R intervals (RRI) on an electrocardiogram (ECG). This study aims to develop a machine learning algorithm for predicting focal epileptic seizures by monitoring R–R interval (RRI) data in real time. The developed algorithm adopts a self-attentive autoencoder (SA-AE), which is a neural network for time-series data. The results of applying the developed seizure prediction algorithm to clinical data demonstrated that it functioned well in most patients; however, false positives (FPs) occurred in specific participants. In a future work, we will investigate the causes of FPs and optimize the developing seizure prediction algorithm to further improve performance using newly added clinical data.

     

Isolation and characterization of a novel human pancreas-specific gene, pancpin, that is down-regulated in pancreatic cancer cells

We reviewed 19 children and adolescents with cervical spine congenital synostosis as in Klippel-Feil syndrome (KFS), with an average follow-up of 12.5 years. We paid particular attention to neurologic complications associated with cervical spine abnormalities. Five patients were affected by neurologic complications; four underwent a surgical procedure; and 14 had no neurologic finding. Two had hypermobility at one level, and one had hypermobility at two levels. We found that the more numerous the occipito-C1 abnormalities, the more significant the neurologic risk. In contrast, this risk was not related to the number of "mobile blocks" or to age. Various mechanisms of neural complications have been studied in the literature: medullary abnormality, spinal instability, narrowing of the cervical canal, and vascular dysfunction. Surgery is usually thought to be required in cases with neurologic complications. The indication for surgery is, however, less clear in cases of pure instability without neurologic involvement because surgery is likely to increase the future risks at mobile disks either above or below the fuse level. Careful clinical and radiologic observation is necessary in such patients. Magnetic resonance imaging (MRI) with lateral views in flexion and extension seem to be the best method for detecting impingement of the spine on the cord.