Measurement optimum condition of speckle interferometry based on dual-camera technique

The speckle interferometer based on multi-camera technology using two cameras is applied to a dynamic deformation measurement of the package of an electronic device. To perform high precise measurement by this method, the optimum conditions for measurements are discussed concerning the size of speckle and the frequency of carrier signals. Under the optimum conditions, the deformation process of the package during the operation of an operational amplifier is measured. Then, the local maximum deformation can be estimated as 150 nm from experimental results. From the results, it can be also confirmed that electronic devices are deformed by the stress of a heat by an operation every second during the operating time.     

A 65 nm Single-Chip Application and Dual-Mode Baseband Processor With Partial Clock Activation and IP-MMU

Supporting both WCDMA with HSDPA and GSM/GPRS/EDGE, the 9.3 times 9.3 mm² SoC fabricated in triple-Vth 65 nm CMOS, has three CPU cores and 20 separate power domains. Unused power domains can be powered down to reduce the leakage power. Partial clock activation scheme especially focused on music playback scene dynamically stops a PLL and clock trees when not necessary and reduces power consumption from 33.6 mW to 19.6 mW. IP-MMU translates virtual address to physical address for 18 hardware-IPs and virtual address space can be allocated when necessary and can be freed after its operation, reducing external memory by 43 MB. Video performance of D1 (720 times 520) size with 30 frames per second for MPEG/AVC decoding and encoding can be achieved under mixed virtual and physical address usage.     

Deformation-induced martensitic transformation behavior in cold-rolled and cold-drawn type 316 stainless steels

We investigate deformation-induced martensitic transformation behavior in cold-rolled and cold-drawn specimens of type 316 stainless steel. Deformation-induced martensite preferentially nucleates at the twin boundary between the austenite matrix and a deformation twin. In the cold-rolled specimen, martensite formed at the twin boundary has a Kurdjumov–Sachs (K–S) relationship with both the austenite matrix and the deformation twin (“double K–S relationship”). In the cold-drawn specimen, two kinds of deformation twins with different twin planes are typically formed, and therefore deformation-induced martensites are formed where the deformation twin boundaries intersect: martensite thus has an imperfect “triple K–S relationship” with the austenite matrix and the two deformation twins. The complicated crystallographic orientation relationship between austenite and martensite grains strongly restricts the formation of some variants of deformation-induced martensites. Because of the difference in number of nucleation sites in the cold-drawn and cold-rolled specimens, martensitic transformation is more enhanced in the former than in the latter.     

Analysis of specific IgE antibodies to staphylococcal enterotoxins,total serum IgE and hemogramme in carriers of Staphylococcus aureus

In order to evaluate the relationship between nasal carriers of S. aureus and their history of allergic diseases, the total serum IgE titer, the hemogramme pattern, and the titers of specific IgE antibody to Staphylococcal enterotoxins A and B (SEA and SEB) and of specific IgG antibody to SEB were investigated in 98 trade school students. Fifteen (15.3%) of the 98 students were sensitized to SEA and/or SEB (40.0% to SEA and 93.3% to SEB). In this group, 11 subjects were S. aureus carriers (73.0%) and 12 had a history of allergic diseases (80.0%). Low levels of specific IgG antibody to SEB were identified from both S. aureus carriers and non-carriers. The S. aureus carriers had significantly higher levels of total IgE titer than the non-carriers and the individuals with a history of allergic diseases had significantly higher total IgE titer levels than those having no history of allergic diseases (p < 0.01). In the hemogramme patterns of S. aureus carriers, a significant positive correlation was observed between the total IgE antibodies and the eosinophil rate (p < 0.05), and a negative correlation (p < 0.001) was recognized between the neutrophil and the lymphocyte rates.     

Dependence of ion selectivity on ordered orientation of neutral carriers in ion-sensing membranes based on thermotropic liquid crystals

Thermotropic liquid-crystalline compounds were applied as membrane materials (membrane solvent and neutral carrier) for neutral carrier-type ion sensors to investigate how the ordered arrangement of neutral carriers affects the property of the resulting ion sensors. Nematic, smectic, and cholesteric liquid-crystalline compounds were used as the membrane solvents and crown ether derivatives with a molecular structure similar to the liquid-crystalline solvent as the K+ neutral carriers. Polarized IR spectroscopy and X-ray diffraction experiments confirmed that the highly ordered arrangement of membrane components was retained in the liquid-crystal-based ion-sensing membranes containing a neutral carrier and a lipophilic salt. The ordered arrangement of neutral carriers in the liquid-crystalline membranes enhanced the ion selectivity significantly, probably due to the efficient cooperation of two adjacent crown ether moieties in the highly ordered and aggregated state.     

Optical shifter for a three-dimensional image by use of a gradient-index lens array

We propose a new function of the two-dimensional lens array that is composed of many gradient-index lenses. The array forms three-dimensional (3D) images. The characteristics of the 3D images depend on the length of the gradient-index lens. Especially, if the length of the lens is an odd-integer multiple of the half period of the optical path, 3D images are pseudoscopic with a reversed depth. The two lens arrays are positioned at a suitable distance, so that orthoscopic 3D images with the correct depth are formed in front of the lens array.     

Growth of highly strained GaInAs-GaAs quantum wells on patterned substrate and its application for multiple-wavelength vertical-cavity surface-emitting laser array

We carried out the growth of highly strained GaInAs-GaAs quantum wells (QWs) on a patterned substrate for extending emission wavelength on a GaAs substrate. We examined the shift of photoluminescence wavelength of the QWs and showed a large wavelength shift due to the spatial modulation in well thickness and indium composition. We demonstrated a single-mode multiple-wavelength vertical-cavity surface-emitting laser (VCSEL) array on a patterned GaAs substrate covering a new wavelength window of 1.1-1.2 /spl mu/m. By optimizing pattern shape, we achieved multiple-wavelength operation with widely and precisely controlled lasing wavelengths. The maximum lasing span is as large as 77 nm. We carried out a data transmission experiment through 5-km of single-mode fiber with a 2.5 Gb/s/channel. The total throughput reaches 10 Gb/s. The VCSEL-based wavelength-division-multiplexing (WDM) source would be a good candidate for WDM-LAN beyond 10 Gb/s.     

Influence of Y2O3 distribution on the rate of tetragonal to monoclinic phase transformation of yttria-stabilized zirconia during hydrothermal aging

Tetragonal to monoclinic phase transformation of yttria-stabilized zirconia, namely plasma-sprayed coatings and sintered bodies containing 4–8 mass % Y₂O₃ during hydrothermal aging was investigated with respect to Y₂O₃ distribution using 1 m area from electron probe microanalysis (EPMA) and 20 nm area from transmission electron microscopy (TEM) analysis. Phase transformation at 473 K was prevented only in plasma-sprayed coatings having more than 6.7 mass % Y₂O₃ in 20 nm microscopic area. Furthermore, it was confirmed influence of Y₂O₃ distribution on the rate constants of this phase transformation was observed at 368 K.     

Theoretical linewidth enhancement factor α ofGa1-xInxAs/GaInAsP/InP strained-quantum-wellstructures

The linewidth enhancement factor, α, in the Ga_1-xIn_xAs/GaInAsP/InP strained-quantum-well system was calculated and analyzed using density-matrix theory taking into account the effects of band-mixing on both the valence subbands and the transition dipole moments. As a result of numerical calculation, it was found that a reduced linewidth enhancement factor of 1.1 at the gain peak wavelength can be obtained in the tensile strained-quantum-well structure for TM-mode operation. This is due to the higher differential gain and a negligible free carrier plasma effect in the TM-mode compared to that of the TE-mode operating in the compressively strained-quantum-well structure. This calculation agrees with previously reported experimental results     

Optimizing dock configuration and staffing in decentralized receiving

In manufacturing facilities, shipping and receiving traditionally have been concentrated in one or two areas of the building. The widespread introduction of just-in-time shipping policies in US manufacturing companies during the past 15 years, as well as the common use of decentralized receiving in the Japanese automobile industry, has motivated the consideration (and occasionally the adoption) of dock configurations to support decentralized receiving (also known as perimeter receiving). By providing multiple access points along the perimeter of the building, decentralized receiving generally reduces the time and cost associated with moving purchased parts to the locations within the facility where they are used, but also results in increased cost of construction, maintenance, and operation for docks and associated truck access/egress, as well as additional interior floorspace requirements. We develop an optimization-based procedure to determine which of several possible dock areas to construct, how many doors or gates each should have, how many unloading and internal material handling staff should be assigned to each group, and which inbound materials each group should handle. We consider the amortized cost of constructing and equipping the docks, the amortized cost of material handling equipment to support the unloaders and material handlers, the cost of operating the material handling equipment, and labor costs for both unloading and internal material handling.