A 30,000-cd/m2, 50-lm/W,and 92%-luminance-uniformity flat discharge fluorescent lamp for LCD backlights

Abstract— A 5.2-in.-diagonal simple-structured argon-mercury cold-cathode flat discharge fluorescent lamp has been developed for LCD backlighting. A pair of insulated electrodes is provided at the top and bottom ends of the inner surface of the front glass plate. Phosphor is deposited on both the front and rear glass plates. A luminance of 30,000 cd/m² and a luminous efficacy of 50 lm/W were obtained with a luminance uniformity of 92% without the use of a diffuser sheet. A mechanism for obtaining the high luminous efficacy is described. Luminance can be dimmed down to 4% of the peak value by extending the pulse interval and/or by reducing the pulse amplitude.     

Chained aggregation model with minimum truncation error

A reduced–order model for a multi–input single–output or a single–input multi–output continuous system is proposed. The model is especially suitable for the case where accuracy in the high-frequency region is important. It also satisfies basic conditions for reduced-order models, such as uniqueness, stability, and a simple calculation requirement. Chained aggregation with the minimization of truncation errors introduces an internal system representation characterized by a system matrix of Hessenberg form and a diagonalized covariance matrix.     

Entirely VPE-grown 1-5?m DFB lasers with low threshold currents

Entirely hydride VPE-grown 1.5?m DFB lasers have been obtained by means of high controllability in film thickness and alloy composition for the GalnAsP/InP system. A low threshold current of 13 mA was achieved by improving the growth method for the layer burying the grating. High uniformity in threshold current and lasing wavelength (Ith = 27.3 ± 9.7 mA, ? = 15571 ± 12?) was obtained.     

ALIS method for high‐resolution color PDPs

This paper describes the Alternate Lighting of Surfaces (ALIS) method as a promising drive technology which can lead to high‐resolution plasma‐display panels (PDPs). This technology provides a resolution of more than 1000 scanning lines without lowering luminance, thus enabling the essential requirements of HDTV. Moreover, it allows the number of scanning electrodes to be halved in comparison with the conventional method, as well as the circuit scale to be minimized due to the use of the single scanning drive. The ALIS method is expected to be a key technology that will help PDPs penetrate the TV market.     

New paradigm of silicon technology

We present a new paradigm of Si technologies to establish a gigahertz-operation gigascale integrated system large-scale integration (LSI), including digital and analog circuits. According to the theoretical analysis of high-speed signal propagation properties in the practical LSI structure, a gas-isolated-interconnect high-k gate dielectric metal-gate metal-substrate silicon-on-insulator (SOI) LSI structure is proposed as a possible solution for a future gigahertz GSI system LSI, where the clock rate is improved up to beyond 10 GHz and the minimum feature size is reduced down to 0.035 μm in keeping with the continuous progress of the LSI's speed performance. Perfect scientific manufacturing free from fluctuations consisting of total low-temperature high-quality and high-speed processes based on very high-density plasma having very low electron temperatures is essential to realize them     

Mechanism‐Based Trapping of the Quinonoid Intermediate by Using the K276R Mutant of PLP‐Dependent 3‐Aminobenzoate Synthase PctV in the Biosynthesis of Pactamycin

Mutational analysis of the pyridoxal 5′‐phosphate (PLP)‐dependent enzyme PctV was carried out to elucidate the multi‐step reaction mechanism for the formation of 3‐aminobenzoate (3‐ABA) from 3‐dehydroshikimate (3‐DSA). Introduction of mutation K276R led to the accumulation of a quinonoid intermediate with an absorption maximum at 580 nm after the reaction of pyridoxamine 5′‐phosphate (PMP) with 3‐DSA. The chemical structure of this intermediate was supported by X‐ray crystallographic analysis of the complex formed between the K276R mutant and the quinonoid intermediate. These results clearly show that a quinonoid intermediate is involved in the formation of 3‐ABA. They also indicate that Lys276 (in the active site of PctV) plays multiple roles, including acid/base catalysis during the dehydration reaction of the quinonoid intermediate.     

Palladium‐Catalyzed Three‐Component Reaction of 3‐(Tri‐n‐ butylstannyl)allyl Acetates,Aldehydes, and Triorganoboranes: An Alternative to the Carbonyl Allylation Using α,γ‐Substituted Allylic Tin Reagents

A three‐component reaction of 3‐(tri‐n‐butylstannyl)allyl acetates, aldehydes, and triorganoboranes in the presence of a palladium‐Xantphos catalyst system predominately gave (E)‐anti‐homoallylic alcohols with high diastereoselectivity and good to high levels of alkene stereocontrol. An efficient chirality transfer was observed when an enantioenriched substrate was employed. The reaction was initiated by the formation of an allylic gem‐palladium/stannyl intermediate, which subsequently underwent allylation of the aldehyde by an allyltributyltin followed by a coupling reaction of the in‐situ‐generated (E)‐vinylpalladium acetate with the triorganoborane.

     

Properties of Calcium Phosphate Cements With Different Tetracalcium Phosphate and Dicalcium Phosphate Anhydrous Molar Ratios

Calcium phosphate cements (CPCs) were prepared using mixtures of tetracalcium phosphate (TTCP) and dicalcium phosphate anhydrous (DCPA), with TTCP/DCPA molar ratios of 1/1, 1/2, or 1/3, with the powder and water as the liquid. Diametral tensile strength (DTS), porosity, and phase composition (powder x-ray diffraction) were determined after the set specimens have been immersed in a physiological-like solution (PLS) for 1 d, 5 d, and 10 d. Cement dissolution rates in an acidified PLS were measured using a dual constant composition method. Setting times ((30 ± 1) min) were the same for all cements. DTS decreased with decreasing TTCP/DCPA ratio and, in some cases, also decreased with PLS immersion time. Porosity and hydroxyapatite (HA) formation increased with PLS immersion time. Cements with TTCP/DCPA ratios of 1/2 and 1/3, which formed calcium-deficient HA, dissolved more rapidly than the cement with a ratio of 1/1. In conclusion, cements may be prepared with a range of TTCP/DCPA ratios, and those with lower ratio had lower strengths but dissolved more rapidly in acidified PLS.